[xmonad] ambiguous-atom_WM_TAKE_FOCUS
wagnerdm at seas.upenn.edu
wagnerdm at seas.upenn.edu
Thu Nov 8 16:17:07 CET 2012
I think the right thing to do in the presence of Adam's patch is just
to remove X.H.ICCCMFocus, right? I'd happily apply such a patch once
we can get the xmonad repository moving again.
As for converting to darcs-2, I believe it was discussed and rejected
before, but I vaguely recall it was because there was some concern
that not everybody was using a darcs that was newer than v2 yet.
Perhaps that has changed -- are there any objections to converting? If
not, I'll do the conversion in, say, one week's time, so speak now or
forever hold your peace.
~d
Quoting Carlos López Camey <c.lopez at kmels.net>:
> (Can we please convert the repositories to darcs format version 2?)
>
> ---
>
> This patch makes xmonad-contrib compile if Adam Vogt's [0] patch is
> applied to xmonad. (see
> http://code.google.com/p/xmonad/issues/detail?id=177#c74)
>
> [0] http://code.google.com/p/xmonad/issues/detail?id=177#c33
>
> 1 patch for repository http://code.haskell.org/XMonadContrib:
>
> Thu Nov 8 11:12:56 CET 2012 c.lopez at kmels.net
> * =ambiguous-atom_WM_TAKE_FOCUS
>
> New patches:
>
> [=ambiguous-atom_WM_TAKE_FOCUS
> c.lopez at kmels.net**20121108101256
> Ignore-this: 76be5ac54d72503ca006a86ae1c98b0a
> ] {
> hunk ./XMonad/Hooks/ICCCMFocus.hs 22
>
> -----------------------------------------------------------------------------
> module XMonad.Hooks.ICCCMFocus
> (
> - atom_WM_TAKE_FOCUS
> + atom_WM_TAKE_FOCUS
> , takeFocusX
> , takeTopFocus
> ) where
> hunk ./XMonad/Hooks/ICCCMFocus.hs 27
>
> -import XMonad
> -import XMonad.Hooks.SetWMName
> -import qualified XMonad.StackSet as W
> -import Control.Monad
> -
> -atom_WM_TAKE_FOCUS ::
> - X Atom
> -atom_WM_TAKE_FOCUS =
> - getAtom "WM_TAKE_FOCUS"
> +import Control.Monad
> +import XMonad
> +import XMonad.Hooks.SetWMName
> +import qualified XMonad.StackSet as W
>
> takeFocusX ::
> Window
> hunk ./XMonad/Hooks/ICCCMFocus.hs 51
> takeTopFocus ::
> X ()
> takeTopFocus =
> - (withWindowSet $ maybe (setFocusX =<< asks theRoot) takeFocusX .
> W.peek) >> setWMName "LG3D"
> + (withWindowSet $ maybe (setFocusX =<< asks theRoot) takeFocusX .
> W.peek) >> setWMName "LG3D"
>
> }
>
> Context:
>
> [ewmh-eventhook-custom
> pastorelli.mario at gmail.com**20120816153032
> Ignore-this: 95176f6d955d74321c28caafda63faa0
>
> Add ewmhDesktopsEventHookCustom, a generalized version of
> ewmhDesktopsEventHook that takes a sort function as argument. This
> sort function should be the same used by the LogHook.
> ]
> [Added smart spacing to the spacing module
> daedalusinfinity at gmail.com**20120923034527
> Ignore-this: 9104bc8feb832f63f2f18998c0f7ba92
> Added smart spacing to the spacing module, which adds spacing to
> all windows,
> except to windows on singleton workspaces.
> ]
> [Improves haddock documentation
> c.lopez at kmels.net**20120826091716
> Ignore-this: a0ce4838652acfff7922c111e4d879bb
> ]
> [Improve comments, add an error throw that shouldn't happen
> c.lopez at kmels.net**20120826085426
> Ignore-this: 7675070826b3c53499e4352e692d6036
> ]
> [fix a bug when ncompletions = nrows
> c.lopez at kmels.net**20120826083137
> Ignore-this: 5f573028318473c333809217c271a81d
> ]
> [Fixes typos in Actions.Launcher haddock documentation
> c.lopez at kmels.net**20120811112502
> Ignore-this: f8152c0ad59d2b0cc9a6c9061e83aaf0
> ]
> [Correctly get the autocompletion item when alwaysHighlight in
> XMonad.Prompt is True
> c.lopez at kmels.net**20120811104805
> Ignore-this: fa2600df210c7d3472a797f19fb31a7
> ]
> [Removes warnings, adds a browser value for LauncherConfig in
> haddock comments
> c.lopez at kmels.net**20120628114533
> Ignore-this: 2610cf63594db3df61bac52f3d8f5836
>
> ]
> [Changes on XPrompt:
> c.lopez at kmels.net**20120628101749
> Ignore-this: 2384f5c1b886716b3d9785877c2e32f9
>
> * Adds mkPromptWithModes, creates a prompt given a list of modes
> (list of XPType).
>
> * Adds Setting `alwaysHighlight` to defaultXPConfig. When set to
> true, autocompletion always highlight the first result if it is not
> highlighted.
>
> Adds module XMonad.Actions.Launcher. This module allows to combine
> and switch between instances of XPrompt. It includes a default set of
> modes which require the programs `hoogle`, `locate` and `calc` to be
> installed to work properly.
>
> ]
> [accept more windows as docks
> Daniel Wagner <daniel at wagner-home.com>**20120823124153
> Ignore-this: 21d9b406c7e39cca2cc60331aab04873
> ]
> [strip newlines from dmenu's returns to be compatible with the newest
> version of dmenu
> longpoke at gmail.com**20120723212807
> Ignore-this: 3b11a35125d0bc23b33e0b926562f85a
> ]
> [A workscreen permits to display a set of workspaces on several
> kedals0 at gmail.com**20120706093308
> Ignore-this: 572ed3c3305205bfbcc17bb3fe2600a3
> screens. In xinerama mode, when a workscreen is viewed, workspaces
> associated to all screens are visible.
>
> The first workspace of a workscreen is displayed on first screen,
> second on second screen, etc. Workspace position can be easily
> changed. If the current workscreen is called again, workspaces are
> shifted.
>
> This also permits to see all workspaces of a workscreen even if just
> one screen is present, and to move windows from workspace to workscreen.
> ]
> [refer to the new name 'handleEventHook' instead of the old name
> 'eventHook' in X.L.Fullscreen documentation
> Daniel Wagner <daniel at wagner-home.com>**20120618181003
> Ignore-this: bd3b26c758cf3993d5a93957bb6f3663
> ]
> [UrgencyHooks made available as Window -> X () functions
> gopsychonauts at gmail.com**20120504062339
> Ignore-this: 6a57cae1d693109b7e27c6471d04f50f
> Adds an UrgencyHook instance for the type Window -> X (), allowing any such
> functions to be used directly as UrgencyHooks. The Show and Read constraints
> were removed from the UrgencyHook class in order to permit this; these
> constraints were required only in a historical implementation of the module,
> which used a layout modifier.
>
> All existing configurations using UrgencyHooks should remain fully
> functional.
> New configs may make use of this modification by declaring their
> UrgencyHook as
> a simple Window -> X () function.
>
> ]
> [updates to XMonad.Prompt re: word-oriented commands
> Brent Yorgey <byorgey at cis.upenn.edu>**20120510174317
> Ignore-this: 138b5e8942fe4b55ad7e6ab24f17703f
>
> + change killWord and moveWord to have emacs-like behavior: first move
> past/kill consecutive whitespace, then move past/kill consecutive
> non-whitespace.
>
> + create variants killWord' and moveWord' which take a predicate
> specifying non-word characters.
>
> + create variants defaultXPKeymap' and emacsLikeXPKeymap' which take
> the same sort of predicate, which is applied to all keybindings with
> word-oriented commands.
> ]
> [Added isUnfocusedOnCurrentWS and fadeInactiveCurrentWSLogHook for
> better support of fading/opacity on multi monitor setups
> Jesper Reenberg <jesper.reenberg at gmail.com>**20120329141818
> Ignore-this: d001a8aafbcdedae21ccd1d18f019185
> ]
> [Fixed X.A.GridSelect to be consistent in the way it (now) sorts the shown
> Jesper Reenberg <jesper.reenberg at gmail.com>**20120501180415
> Ignore-this: 1d0991f9fb44e42f5d1c5a4f427ea661
> elements when modifying the searchString.
>
> The implemented ordering sorts based on how "deep the needle is in the
> haystack", meaning that searching for "st" in the elements "Install"
> and "Study"
> will order them as "Study" and "Install". Previously there was no
> ordering and
> when using GridSelect to select workspaces, the ordering was not
> consistent, as
> the list of workspaces (if not modified manually) is ordered by
> last used. In
> this case either "Study" or "Install" would come first depending on which
> workspace was last visited.
> ]
> [Use getXMonadDir to get the default xmonad directory.
> Julia Jomantaite <julia.jomantaite at gmail.com>**20120501121427
> Ignore-this: a075433761488b76a58a193aeb4e4a25
> ]
> [Minor haddock formatting for X.L.OnHost and X.A.DynamicWorkspaceOrder
> Adam Vogt <vogt.adam at gmail.com>**20120428194552
> Ignore-this: 843ec567e249cc96d51ca931f1e36514
> ]
> [Remove trailing whitespace.
> Adam Vogt <vogt.adam at gmail.com>**20120428194048
> Ignore-this: d61584110954e84d3611ef3497a29725
> ]
> [Add emacs-like keys to browse history in XMonad.Prompt
> Carlos Lopez-Camey <c.lopez at kmels.net>**20120421110737
> Ignore-this: b90345f72007d09a6b732b974c0faf79
> ]
> [Adds an emacs-like Keymap in XMonad.Prompt
> Carlos Lopez-Camey <c.lopez at kmels.net>**20120421012335
> Ignore-this: f281b8ad01f3d21055e2d6de79af2d79
> ]
> [add 'withNthWorkspace' to DynamicWorkspaceOrder.
> jakob at pipefour.org**20120407184640
> Ignore-this: f5f87ffe9ddf1a12fab775e6fb8e856f
> Note this is very similar to the function of the same name exported by
> DynamicWorkspaces. Ultimately it would probably be cleaner to
> generalize the one in DynamicWorkspaces to accept an arbitrary
> workspace sort as a parameter; this is left as an exercise for future
> hackers.
> ]
> [XMonad.Layout.OnHost allows host-specific modifications to a layout, which
> allbery.b at gmail.com**20120320030912
> Ignore-this: 4c0d5580e805ff9f40918308914f3bf9
> is otherwise very difficult to do. Similarly to X.L.PerWorkspace,
> it provides
> onHost, onHosts, modHost, and modHosts layout modifiers. It attempts to do
> smart hostname comparison, such that short names will be matched with short
> names and FQDNs with FQDNs.
>
> This module currently requires that $HOST be set in the environment.
> You can use System.Posix.Env.setEnv to do so in xmonad.hs if need be.
> (Properly, this should be done via the network library, but I'm trying to
> avoid adding that dependency.) An alternative would be to shell out to
> get the name, but that has considerable portability hurdles.
> ]
> [Bump version to 0.10.1
> Adam Vogt <vogt.adam at gmail.com>**20120320005311
> Ignore-this: f0608ffaa877f605eaa86c45a107a14d
>
> Raising the X11 dependency while keeping the xmonad version the
> same leads to
> problems where cabal install uses the dependency versions following hackage,
> not what is installed.
> ]
> [narrower BorderResize rectangles placed within border edges
> Jens Petersen <juhp at community.haskell.org>**20120314064703
> Ignore-this: 3a43bbdb7f2317d702edafb231f58802
>
> Change the border resize rectangles to be narrower and only extend
> inside the window not outside. Most window managers just seem to use
> the border decoration area for starting resizes which is often
> just 1 pixel
> wide but as a compromise the width is now 2 pixels (before it was 10!).
> The rectangles are now placed symmetrically within the border and window.
> This seems to work ok with PositionStoreFloat for the Bluetile config.
> ]
> [add-dynamic-bars-module
> Ben Boeckel <mathstuf at gmail.com>**20120316002204
> Ignore-this: 41347c8f894d8d0b5095dfad86784cf4
>
> This adds the X.H.DynamicBars module. It allows per-screen status bars to be
> easily managed and dynamically handles the number of screens changing.
> ]
> [bump X11 dependency so that noModMask is available
> Daniel Wagner <daniel at wagner-home.com>**20120316000302
> Ignore-this: 971a75dcad25f66848eef4174cd4ddd1
> ]
> [Paste.hs: rm noModMask, shifted definition to X11 binding (see
> previous email)
> gwern0 at gmail.com**20111203203038
> Ignore-this: dcd164ff8f8f135c8fdef08f42f9244d
> ]
> [GroupNavigation: fix import typo in usage
> Jens Petersen <juhp at community.haskell.org>**20120312103349
> Ignore-this: 65367218ca50a33a37813469b4616f34
> ]
> [add sendToEmptyWorkspace to FindEmptyWorkspace
> Jens Petersen <juhp at community.haskell.org>**20120312102331
> Ignore-this: 50e7992d80d2db43e4d0adf5c95e964f
>
> sendToEmptyWorkspace is like tagToEmptyWorkspace except
> it does not change workspace after moving the window.
> ]
> [xmonad-contrib.cabal: simplify xmonad dependency to >=0.10 && < 0.11
> Jens Petersen <juhp at community.haskell.org>**20120312101800
> Ignore-this: 1ff5a0caa2a1e3487e9a0831e385b3d2
>
> Unless there is a particular reason for listing the lower and upper bounds
> separately then this seems simpler and cleaner.
> ]
> [ShowWName: Increase horizontal padding for flash
> crodjer at gmail.com**20120305164517
> Ignore-this: de5fd30fad2630875c5c78091f07c324
>
> Currently the flash window width leaves a very small amount of padding. This
> patch adds some extra horizontal width, governed by text width and length.
> ]
> [persist-togglehook-options
> Ben Boeckel <mathstuf at gmail.com>**20120311050143
> Ignore-this: 580bacb35b617c1198f01c5a7c0d3fef
>
> Save the state of ToggleHook options over a restart.
> ]
> [ShowWName flash window background color
> Rohan Jain <crodjer at gmail.com>**20120306065224
> Ignore-this: 9cd8fcfc13cc326b9dcc79ef3cc21b26
>
> While calling paintAndWrite for flash window, the background color
> from config
> should also be passed on as window background in addition to as
> text background
> color. Otherwise the window color gets set to the default black
> which shows up
> when text cannot span whole of the window.
>
> This issue becomes visible when the font size is considerably large
> or even in
> small size with truetype fonts.
> ]
> [ShowWName: Fix flash location by screen rectangle
> crodjer at gmail.com**20120305161240
> Ignore-this: 83ec4cce2297efc6736a1fe55f44ee73
>
> In case of using this hook with multiple monitors, the Tag flash was not
> following the screen's coordinates. This patch shifts the new window
> created for
> flash according to the Rectangle defined by the screen.
> ]
> [Fix typo in tabbed layout link for font utils docs
> crodjer at gmail.com**20120229070022
> Ignore-this: 2f7e90269e08ce08264d7b1d05bb16f9
> ]
> [L.WorkspaceDir: cleanup redundant {definitions,imports}
> Steffen Schuldenzucker <sschuldenzucker at uni-bonn.de>**20120229112124
> Ignore-this: 7a796b18a64e693e071e9ea3a6a01aa3
> ]
> [fix L.WorkspaceDir special char handling: remove "echo -n" processing
> Steffen Schuldenzucker <sschuldenzucker at uni-bonn.de>**20120227122004
> Ignore-this: ab48687eb4c9018312089a13fd25ecd8
> ]
> [Add BorderUrgencyHook to XMonad.Hooks.UrgencyHook
> allbery.b at gmail.com**20120225082616
> Ignore-this: 9fac77914ff28a6e9eb830e8c9c7e21e
> BorderUrgencyHook is a new UrgencyHook usable with withUrgencyHook or
> withUrgencyHookC; it allows an urgent window to be given a different
> border color. This may not always work as intended, since UrgencyHook
> likes to assume that a window being visible is sufficient to disable
> urgency notification; but with suppressWhen = Never it may work well
> enough.
>
> There is a report that if a new window is created at the wrong time,
> the wrong window may be marked urgent somehow. I seem to once again
> be revealing bugs in underlying packages, although a quick examination
> of X.H.UrgencyHook doesn't seem to show any way for the wrong window
> to be selected.
> ]
> [Adding use case for namedScratchpad.
> nicolas.dudebout at gatech.edu**20120122235843
> Ignore-this: 44201e82bcd708cd7098f060345400f1
> ]
> [Actions.WindowGo: typo fix - trim 's' per cub.uanic
> https://code.google.com/p/xmonad/issues/detail?id=491
> gwern0 at gmail.com**20120116224244
> Ignore-this: fb1d55c1b4609069c55f13523c091260
> ]
> [XMonad.Actions.PhysicalScreens: fix typo spotted by Chris Pick
> <haskell at chrispick.com>
> gwern0 at gmail.com**20120115223013
> Ignore-this: eb73b33b07dc58a36d3aa00bc8ac31c2
> ]
> [roll back previous incorrect fix
> Daniel Wagner <daniel at wagner-home.com>**20120111214133
> Ignore-this: 91496faef411e6ae3442498b528d119b
> ]
> [Extending: fix http://code.google.com/p/xmonad/issues/detail?id=490
> gwern0 at gmail.com**20120111211907
> Ignore-this: 515afbed507c070d60ab547e98682f12
> ]
> [another documentation patch: XMonadContrib.UpdatePointer ->
> XMonad.Actions.UpdatePointer
> Daniel Wagner <daniel at wagner-home.com>**20120111211226
> Ignore-this: 1444e4a3f20ba442602ef1811d0b32c7
> ]
> [documentation patch, fixes issue 490
> Daniel Wagner <daniel at wagner-home.com>**20120111210832
> Ignore-this: 8d899e15f9d1a657e9fc687e2f649f45
> ]
> [X.H.EwmhDesktops note that fullscreenEventHook is not included in ewmh
> Adam Vogt <vogt.adam at gmail.com>**20120102211404
> Ignore-this: 92f15fa93877c165158c8fbd24aa2360
>
> Just a documentation fix (nomeata's suggestion at issue 339).
> ]
> [X.H.EwmhDesktops haddock formatting.
> Adam Vogt <vogt.adam at gmail.com>**20120102211203
> Ignore-this: cfff985e4034e06a0fe27c52c9971901
> ]
> [X.A.Navigation2D
> Norbert Zeh <nzeh at cs.dal.ca>**20111208205842
> Ignore-this: 3860cc71bfc08d99bd8279c2e0945186
>
> This is a new module to support directional navigation across
> multiple screens.
> As such it is related to X.A.WindowNavigation and
> X.L.WindowNavigation, but it
> is more general. For a detailed discussion of the differences, see
> http://www.cs.dal.ca/~nzeh/xmonad/Navigation2D.pdf.
> ]
> [documentation patch: mention PostfixOperators
> Daniel Wagner <daniel at wagner-home.com>**20111210234820
> Ignore-this: 20a05b1f396f18a742346d6e3daea9a8
> ]
> [P.Shell documentation and add missing unsafePrompt export
> Adam Vogt <vogt.adam at gmail.com>**20111207163951
> Ignore-this: a03992ffdc9c1a0f5bfa6dafc453b587
>
> Haddock (version 2.9.2 at least) does not attach documentation to
> any of a b or
> c when given:
>
> -- | documentation
> a,b,c :: X
>
> ]
> [Paste: 3 more escaped characters from alistra
> gwern0 at gmail.com**20111129160335
> Ignore-this: 46f5b86a25bcd2b26d2e07ed33ffad68
> ]
> [unfuck X.U.Paste
> Daniel Wagner <daniel at wagner-home.com>**20111129032331
> Ignore-this: d450e23ca026143bb6ca9d744dcdd906
> ]
> [XMonad.Util.Paste: +alistra's patch for fixing his pasting of things
> like email address (@)
> gwern0 at gmail.com**20111128215648
> Ignore-this: 4af1af27637fe056792aa4f3bb0403eb
> ]
> [XMonad.Util.Paste: rm myself from maintainer field; I don't know how
> to fix any of it even if I wanted
> gwern0 at gmail.com**20111128213001
> Ignore-this: 87a4996aaa5241428ccb13851c5eb455
> ]
> [XMonad.Prompt.Shell: improve 'env' documentation to cover goodgrue's problem
> gwern0 at gmail.com**20111127231507
> Ignore-this: 7b652a280960cbdf99c236496ca091b0
> ]
> [Fix spelling 'prefered' -> 'preferred'.
> Erik de Castro Lopo <erikd at mega-nerd.com>**20111125010229
> Ignore-this: f2eac1728b5e023399188becf867a14d
> ]
> [Restore TrackFloating behavior to an earlier version.
> Adam Vogt <vogt.adam at gmail.com>**20111120045538
> Ignore-this: 1a1367b4171c3ad23b0553766021629f
>
> Thanks for liskni_si for pressing the matter: without this change it is very
> broken, with the patch it is still not perfect but still useful.
> ]
> [Explicitly list test files in .cabal
> Adam Vogt <vogt.adam at gmail.com>**20111118232511
> Ignore-this: ac48a0d388293cc6c771d676aaf142e3
>
> In the future, require Cabal >= 1.6 to be able to just write tests/*.hs
> ]
> [TAG 0.10
> Adam Vogt <vogt.adam at gmail.com>**20111118225640
> Ignore-this: 8f81b175b902e985d584160fc41ab7d1
> ]
> Patch bundle hash:
> 3425b4e320eeea57e97b0fdf66f3d11610993116
>
More information about the xmonad
mailing list