[ANNOUNCE] 7.10.3 release candidate 2
George Colpitts
george.colpitts at gmail.com
Mon Nov 9 13:19:26 UTC 2015
install into /opt works fine
However the INSTALL file says
`make show-install-setup' prints the details of where the different
pieces of the bundle are heading when -- possibly helpful
but this doesn't work:
make show-install-setup
make: *** No rule to make target `show-install-setup'. Stop.
I installed in /opt as I didn't want to overwrite my current ghc. It would
be nice if there was an uninstall target for make.
I removed /opt/bin/* and /opt/lib/* as there were only ghc files there.
Then I did an uninstall-hs (uninstall of Haskell Platform)
Then install into the default (/usr/local) I get:
/usr/bin/install -c -m 644 docs/man/ghc.1 "/usr/local/share/man/man1"
install: /usr/local/share/man/man1/ghc.1: No such file or directory
make[1]: *** [install_man] Error 71
make: *** [install] Error 2
I then did
ls -l /usr/local/share/man/man1/ghc.1
lrwxr-xr-x 1 gcolpitts admin 81 Oct 11 17:35
/usr/local/share/man/man1/ghc.1 ->
/Library/Frameworks/GHC.framework/Versions/7.10.2-x86_64/usr/share/man/man1/ghc.1
then
rm /usr/local/share/man/man1/ghc.1
and then "make install" worked
However cabal install hlint didn't work because it couldn't install
text-1.2.1.3:
cabal install text
...
Data/Text.hs:203:8:
Could not find module ‘Control.DeepSeq’
Perhaps you haven't installed the profiling libraries for package
‘deepseq-1.4.1.1 at deeps_6vMKxt5sPFR0XsbRWvvq59’?
Use -v to see a list of the files searched for.
Data/Text.hs:208:8:
Could not find module ‘Data.Char’
Perhaps you haven't installed the profiling libraries for package
‘base-4.8.2.0’?
Use -v to see a list of the files searched for.
Data/Text.hs:209:8:
Could not find module ‘Data.Data’
Perhaps you haven't installed the profiling libraries for package
‘base-4.8.2.0’?
Use -v to see a list of the files searched for.
Data/Text.hs:211:8:
Could not find module ‘Control.Monad’
Perhaps you haven't installed the profiling libraries for package
‘base-4.8.2.0’?
Use -v to see a list of the files searched for.
Data/Text.hs:212:8:
Could not find module ‘Control.Monad.ST’
Perhaps you haven't installed the profiling libraries for package
‘base-4.8.2.0’?
...
ghc-pkg list
/usr/local/lib/ghc-7.10.2.20151105/package.conf.d:
Cabal-1.22.4.0
array-0.5.1.0
base-4.8.2.0
bin-package-db-0.0.0.0
binary-0.7.5.0
rts-1.0
bytestring-0.10.6.0
containers-0.5.6.2
deepseq-1.4.1.1
directory-1.2.2.0
filepath-1.4.0.0
(ghc-7.10.2.20151105)
ghc-prim-0.4.0.0
haskeline-0.7.2.1
hoopl-3.10.0.2
hpc-0.6.0.2
integer-gmp-1.0.0.0
pretty-1.1.2.0
process-1.2.3.0
template-haskell-2.10.0.0
terminfo-0.4.0.1
time-1.5.0.1
transformers-0.4.2.0
unix-2.7.1.0
xhtml-3000.2.1
ghc-pkg check
Similar problems with cabal install vector
On Mon, Nov 9, 2015 at 12:07 AM, Carter Schonwald <
carter.schonwald at gmail.com> wrote:
> nope, my error was a bad copy and paste :)
>
> heres a link to my build (uses the GCC style rts build, which should be
> more performant than the default clang one last i checked, also has html
> docs and should work OS X >= 10.7)
>
>
> https://www.wellposed.com.s3.amazonaws.com/opensource/ghc/releasebuild-unofficial/ghc-7.10.2.20151105-x86_64-apple-darwin.tar.bz2
>
> (http:// also works)
>
>
> shasum -a512 ghc-7.10.2.20151105-x86_64-apple-darwin.tar.bz2
> 003a23929a17e9d01f52ef0a9388b6af51d409eda12627b20500c820f44da1e21976a46da7a50d040072cf5243a05d8f6a4344899fe3c2d8fb3f4f101ef29dce
>
>
> for those who want to check the check the sha sum
>
>
>
> On Sun, Nov 8, 2015 at 9:36 PM, George Colpitts <george.colpitts at gmail.com
> > wrote:
>
>> I get
>>
>> make[1]: *** [libraries/integer-gmp2/gmp/gmp.h] Error 1
>> make[1]: *** Waiting for unfinished jobs....
>> checking whether byte ordering is bigendian... no
>> checking assembler .cfi pseudo-op support... yes
>> checking for _ prefix in compiled symbols... yes
>> checking whether .eh_frame section should be read-only... expr: syntax
>> error
>> no
>> checking for __attribute__((visibility("hidden")))... no
>> checking that generated files are newer than configure... done
>> configure: creating ./config.status
>> config.status: creating include/Makefile
>> config.status: creating include/ffi.h
>> config.status: creating Makefile
>> config.status: creating testsuite/Makefile
>> config.status: creating man/Makefile
>> config.status: creating libffi.pc
>> config.status: creating fficonfig.h
>> config.status: linking ../src/x86/ffitarget.h to include/ffitarget.h
>> config.status: executing buildir commands
>> config.status: create top_srcdir/Makefile guessed from local Makefile
>> config.status: build in x86_64-apple-darwin (HOST=)
>> config.status: executing depfiles commands
>> config.status: executing libtool commands
>> config.status: executing include commands
>> config.status: executing src commands
>> # wc on OS X has spaces in its output, which libffi's Makefile
>> # doesn't expect, so we tweak it to sed them out
>> mv libffi/build/Makefile libffi/build/Makefile.orig
>> sed "s#wc -w#wc -w | sed 's/ //g'#" < libffi/build/Makefile.orig >
>> libffi/build/Makefile
>> "touch" libffi/stamp.ffi.static-shared.configure
>> make: *** [all] Error 2
>>
>> Is that the same error you are getting?
>>
>>
>> On Sun, Nov 8, 2015 at 9:34 PM, Carter Schonwald <
>> carter.schonwald at gmail.com> wrote:
>>
>>> I'm having trouble setting the make file flags to make the Mac build use
>>> the intree gmp. I'm going to dig into this a bit more this evening.
>>>
>>>
>>> On Sunday, November 8, 2015, Ben Gamari <ben at well-typed.com> wrote:
>>>
>>>> Ben Gamari <ben at well-typed.com> writes:
>>>>
>>>> > Ben Gamari <ben at well-typed.com> writes:
>>>> >
>>>> >> Hello everyone,
>>>> >>
>>>> >> We are pleased to announce the second release candidate for GHC
>>>> 7.10.3:
>>>> >>
>>>> >> https://downloads.haskell.org/~ghc/7.10.3-rc2/
>>>> >>
>>>> > It has been brought to my attention that the configure script in this
>>>> > source tarballs is out of date. Because of this `configure` will
>>>> > still fail on OS X. Reports suggest that there may be other issues
>>>> > unrelated to the configure issue on OS X as well.
>>>> >
>>>> Further testing suggests that perhaps the only issue is the out-of-date
>>>> `configure` script. Mac OS X users with `autotools` installed should be
>>>> able to run `./boot` in the source tree to bring `configure` up-to-date,
>>>> at which point this release candidate should be buildable.
>>>>
>>>> I'll cut an -rc3 with a fixed `configure` script today.
>>>>
>>>> Cheers,
>>>>
>>>> - Ben
>>>>
>>>>
>>> _______________________________________________
>>> ghc-devs mailing list
>>> ghc-devs at haskell.org
>>> http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.haskell.org/pipermail/ghc-devs/attachments/20151109/f201b251/attachment-0001.html>
More information about the ghc-devs
mailing list