[Git][ghc/ghc][wip/ticky-eventlog] 227 commits: Change zipWith to zipWithEqual in a few places
Ben Gamari
gitlab at gitlab.haskell.org
Tue May 26 03:49:23 UTC 2020
Ben Gamari pushed to branch wip/ticky-eventlog at Glasgow Haskell Compiler / GHC
Commits:
0da186c1 by Krzysztof Gogolewski at 2020-04-14T07:55:20-04:00
Change zipWith to zipWithEqual in a few places
- - - - -
074c1ccd by Andreas Klebinger at 2020-04-14T07:55:55-04:00
Small change to the windows ticker.
We already have a function to go from time to ms so use it.
Also expand on the state of timer resolution.
- - - - -
b69cc884 by Alp Mestanogullari at 2020-04-14T07:56:38-04:00
hadrian: get rid of unnecessary levels of nesting in source-dist
- - - - -
d0c3b069 by Julien Debon at 2020-04-14T07:57:16-04:00
doc (Foldable): Add examples to Data.Foldable
See #17929
- - - - -
5b08e0c0 by Ben Gamari at 2020-04-14T23:28:20-04:00
StgCRun: Enable unwinding only on Linux
It's broken on macOS due and SmartOS due to assembler differences
(#15207) so let's be conservative in enabling it. Also, refactor things
to make the intent clearer.
- - - - -
27cc2e7b by Ben Gamari at 2020-04-14T23:28:57-04:00
rts: Don't mark evacuate_large as inline
This function has two callsites and is quite large. GCC consequently
decides not to inline and warns instead. Given the situation, I can't
blame it. Let's just remove the inline specifier.
- - - - -
9853fc5e by Ben Gamari at 2020-04-14T23:29:48-04:00
base: Enable large file support for OFD locking impl.
Not only is this a good idea in general but this should also avoid
issue #17950 by ensuring that off_t is 64-bits.
- - - - -
7b41f21b by Matthew Pickering at 2020-04-14T23:30:24-04:00
Hadrian: Make -i paths absolute
The primary reason for this change is that ghcide does not work with
relative paths. It also matches what cabal and stack do, they always
pass absolute paths.
- - - - -
41230e26 by Daniel Gröber at 2020-04-14T23:31:01-04:00
Zero out pinned block alignment slop when profiling
The heap profiler currently cannot traverse pinned blocks because of
alignment slop. This used to just be a minor annoyance as the whole block
is accounted into a special cost center rather than the respective object's
CCS, cf. #7275. However for the new root profiler we would like to be able
to visit _every_ closure on the heap. We need to do this so we can get rid
of the current 'flip' bit hack in the heap traversal code.
Since info pointers are always non-zero we can in principle skip all the
slop in the profiler if we can rely on it being zeroed. This assumption
caused problems in the past though, commit a586b33f8e ("rts: Correct
handling of LARGE ARR_WORDS in LDV profiler"), part of !1118, tried to use
the same trick for BF_LARGE objects but neglected to take into account that
shrink*Array# functions don't ensure that slop is zeroed when not
compiling with profiling.
Later, commit 0c114c6599 ("Handle large ARR_WORDS in heap census (fix
as we will only be assuming slop is zeroed when profiling is on.
This commit also reduces the ammount of slop we introduce in the first
place by calculating the needed alignment before doing the allocation for
small objects where we know the next available address. For large objects
we don't know how much alignment we'll have to do yet since those details
are hidden behind the allocateMightFail function so there we continue to
allocate the maximum additional words we'll need to do the alignment.
So we don't have to duplicate all this logic in the cmm code we pull it
into the RTS allocatePinned function instead.
Metric Decrease:
T7257
haddock.Cabal
haddock.base
- - - - -
15fa9bd6 by Daniel Gröber at 2020-04-14T23:31:01-04:00
rts: Expand and add more notes regarding slop
- - - - -
caf3f444 by Daniel Gröber at 2020-04-14T23:31:01-04:00
rts: allocatePinned: Fix confusion about word/byte units
- - - - -
c3c0f662 by Daniel Gröber at 2020-04-14T23:31:01-04:00
rts: Underline some Notes as is conventional
- - - - -
e149dea9 by Daniel Gröber at 2020-04-14T23:31:38-04:00
rts: Fix nomenclature in OVERWRITING_CLOSURE macros
The additional commentary introduced by commit 8916e64e5437 ("Implement
shrinkSmallMutableArray# and resizeSmallMutableArray#.") unfortunately got
this wrong. We set 'prim' to true in overwritingClosureOfs because we
_don't_ want to call LDV_recordDead().
The reason is because of this "inherently used" distinction made in the LDV
profiler so I rename the variable to be more appropriate.
- - - - -
1dd3d18c by Daniel Gröber at 2020-04-14T23:31:38-04:00
Remove call to LDV_RECORD_CREATE for array resizing
- - - - -
19de2fb0 by Daniel Gröber at 2020-04-14T23:31:38-04:00
rts: Assert LDV_recordDead is not called for inherently used closures
The comments make it clear LDV_recordDead should not be called for
inhererently used closures, so add an assertion to codify this fact.
- - - - -
0b934e30 by Ryan Scott at 2020-04-14T23:32:14-04:00
Bump template-haskell version to 2.17.0.0
This requires bumping the `exceptions` and `text` submodules to bring
in commits that bump their respective upper version bounds on
`template-haskell`.
Fixes #17645. Fixes #17696.
Note that the new `text` commit includes a fair number of additions
to the Haddocks in that library. As a result, Haddock has to do more
work during the `haddock.Cabal` test case, increasing the number of
allocations it requires. Therefore,
-------------------------
Metric Increase:
haddock.Cabal
-------------------------
- - - - -
22cc8e51 by Ryan Scott at 2020-04-15T17:48:47-04:00
Fix #18052 by using pprPrefixOcc in more places
This fixes several small oversights in the choice of pretty-printing
function to use. Fixes #18052.
- - - - -
ec77b2f1 by Daniel Gröber at 2020-04-15T17:49:24-04:00
rts: ProfHeap: Fix wrong time in last heap profile sample
We've had this longstanding issue in the heap profiler, where the time of
the last sample in the profile is sometimes way off causing the rendered
graph to be quite useless for long runs.
It seems to me the problem is that we use mut_user_time() for the last
sample as opposed to getRTSStats(), which we use when calling heapProfile()
in GC.c.
The former is equivalent to getProcessCPUTime() but the latter does
some additional stuff:
getProcessCPUTime() - end_init_cpu - stats.gc_cpu_ns -
stats.nonmoving_gc_cpu_ns
So to fix this just use getRTSStats() in both places.
- - - - -
85fc32f0 by Sylvain Henry at 2020-04-17T12:45:25-04:00
Hadrian: fix dyn_o/dyn_hi rule (#17534)
- - - - -
bfde3b76 by Ryan Scott at 2020-04-17T12:46:02-04:00
Fix #18065 by fixing an InstCo oversight in Core Lint
There was a small thinko in Core Lint's treatment of `InstCo`
coercions that ultimately led to #18065. The fix: add an apostrophe.
That's it!
Fixes #18065.
Co-authored-by: Simon Peyton Jones <simonpj at microsoft.com>
- - - - -
a05348eb by Cale Gibbard at 2020-04-17T13:08:47-04:00
Change the fail operator argument of BindStmt to be a Maybe
Don't use noSyntaxExpr for it. There is no good way to defensively case
on that, nor is it clear one ought to do so.
- - - - -
79e27144 by John Ericson at 2020-04-17T13:08:47-04:00
Use trees that grow for rebindable operators for `<-` binds
Also add more documentation.
- - - - -
18bc16ed by Cale Gibbard at 2020-04-17T13:08:47-04:00
Use FailOperator in more places, define a couple datatypes (XBindStmtRn and XBindStmtTc) to help clarify the meaning of XBindStmt in the renamer and typechecker
- - - - -
84cc8394 by Simon Peyton Jones at 2020-04-18T13:20:29-04:00
Add a missing zonk in tcHsPartialType
I omitted a vital zonk when refactoring tcHsPartialType in
commit 48fb3482f8cbc8a4b37161021e846105f980eed4
Author: Simon Peyton Jones <simonpj at microsoft.com>
Date: Wed Jun 5 08:55:17 2019 +0100
Fix typechecking of partial type signatures
This patch fixes it and adds commentary to explain why.
Fixes #18008
- - - - -
2ee96ac1 by Ben Gamari at 2020-04-18T13:21:05-04:00
gitlab-ci: Bump FreeBSD bootstrap compiler to 8.10.1
- - - - -
434312e5 by Ben Gamari at 2020-04-18T13:21:05-04:00
gitlab-ci: Enable FreeBSD job for so-labelled MRs
- - - - -
ddffb227 by Ben Gamari at 2020-04-18T13:21:05-04:00
gitlab-ci: Use rules syntax for conditional jobs
- - - - -
e2586828 by Ben Gamari at 2020-04-18T13:21:05-04:00
Bump hsc2hs submodule
- - - - -
15ab6cd5 by Ömer Sinan Ağacan at 2020-04-18T13:21:44-04:00
Improve prepForeignCall error reporting
Show parameters and description of the error code when ffi_prep_cif
fails.
This may be helpful for debugging #17018.
- - - - -
3ca52151 by Sylvain Henry at 2020-04-18T20:04:14+02:00
GHC.Core.Opt renaming
* GHC.Core.Op => GHC.Core.Opt
* GHC.Core.Opt.Simplify.Driver => GHC.Core.Opt.Driver
* GHC.Core.Opt.Tidy => GHC.Core.Tidy
* GHC.Core.Opt.WorkWrap.Lib => GHC.Core.Opt.WorkWrap.Utils
As discussed in:
* https://mail.haskell.org/pipermail/ghc-devs/2020-April/018758.html
* https://gitlab.haskell.org/ghc/ghc/issues/13009#note_264650
- - - - -
15312bbb by Sylvain Henry at 2020-04-18T20:04:46+02:00
Modules (#13009)
* SysTools
* Parser
* GHC.Builtin
* GHC.Iface.Recomp
* Settings
Update Haddock submodule
Metric Decrease:
Naperian
parsing001
- - - - -
eaed0a32 by Alexis King at 2020-04-19T03:16:44-04:00
Add missing addInScope call for letrec binders in OccurAnal
This fixes #18044, where a shadowed variable was incorrectly substituted
by the binder swap on the RHS of a floated-in letrec. This can only
happen when the uniques line up *just* right, so writing a regression
test would be very difficult, but at least the fix is small and
straightforward.
- - - - -
36882493 by Shayne Fletcher at 2020-04-20T04:36:43-04:00
Derive Ord instance for Extension
Metric Increase:
T12150
T12234
- - - - -
b43365ad by Simon Peyton Jones at 2020-04-20T04:37:20-04:00
Fix a buglet in redundant-constraint warnings
Ticket #18036 pointed out that we were reporting a redundant
constraint when it really really wasn't.
Turned out to be a buglet in the SkolemInfo for the
relevant implication constraint. Easily fixed!
- - - - -
d5fae7da by Ömer Sinan Ağacan at 2020-04-20T14:39:28-04:00
Mark T12010 fragile on 32-bit
- - - - -
bca02fca by Adam Sandberg Ericsson at 2020-04-21T06:38:45-04:00
docs: drop note about not supporting shared libraries on unix systems
[skip ci]
- - - - -
6655f933 by Sylvain Henry at 2020-04-21T06:39:32-04:00
Use ParserFlags in GHC.Runtime.Eval (#17957)
Instead of passing `DynFlags` to functions such as `isStmt` and
`hasImport` in `GHC.Runtime.Eval` we pass `ParserFlags`. It's a much
simpler structure that can be created purely with `mkParserFlags'`.
- - - - -
70be0fbc by Sylvain Henry at 2020-04-21T06:39:32-04:00
GHC.Runtime: avoid DynFlags (#17957)
* add `getPlatform :: TcM Platform` helper
* remove unused `DynFlags` parameter from `emptyPLS`
- - - - -
35e43d48 by Sylvain Henry at 2020-04-21T06:39:32-04:00
Avoid DynFlags in Ppr code (#17957)
* replace `DynFlags` parameters with `SDocContext` parameters for a few
Ppr related functions: `bufLeftRenderSDoc`, `printSDoc`,
`printSDocLn`, `showSDocOneLine`.
* remove the use of `pprCols :: DynFlags -> Int` in Outputable. We
already have the information via `sdocLineLength :: SDocContext ->
Int`
- - - - -
ce5c2999 by Sylvain Henry at 2020-04-21T06:39:32-04:00
Avoid using sdocWithDynFlags (#17957)
Remove one use of `sdocWithDynFlags` from `GHC.CmmToLlvm.llvmCodeGen'`
and from `GHC.Driver.CodeOutput.profilingInitCode`
- - - - -
f2a98996 by Sylvain Henry at 2020-04-21T06:39:32-04:00
Avoid `sdocWithDynFlags` in `pprCLbl` (#17957)
* add a `DynFlags` parameter to `pprCLbl`
* put `maybe_underscore` and `pprAsmCLbl` in a `where` clause to avoid
`DynFlags` parameters
- - - - -
747093b7 by Sylvain Henry at 2020-04-21T06:39:32-04:00
CmmToAsm DynFlags refactoring (#17957)
* Remove `DynFlags` parameter from `isDynLinkName`: `isDynLinkName` used
to test the global `ExternalDynamicRefs` flag. Now we test it outside of
`isDynLinkName`
* Add new fields into `NCGConfig`: current unit id, sse/bmi versions,
externalDynamicRefs, etc.
* Replace many uses of `DynFlags` by `NCGConfig`
* Moved `BMI/SSE` datatypes into `GHC.Platform`
- - - - -
ffd7eef2 by Takenobu Tani at 2020-04-22T23:09:50-04:00
stg-spec: Modify file paths according to new module hierarchy
This patch updates file paths according to new module hierarchy [1]:
* GHC/Stg/Syntax.hs <= stgSyn/StgSyn.hs
* GHC/Types/Literal.hs <= basicTypes/Literal.hs
* GHC/Types/CostCentre.hs <= profiling/CostCentre.hs
This patch also updates old file path [2]:
* utils/genapply/Main.hs <= utils/genapply/GenApply.hs
[1]: https://gitlab.haskell.org/ghc/ghc/-/wikis/Make-GHC-codebase-more-modular
[2]: commit 0cc4aad36f
[skip ci]
- - - - -
e8a5d81b by Jonathan DK Gibbons at 2020-04-22T23:10:28-04:00
Refactor the `MatchResult` type in the desugarer
This way, it does a better job of proving whether or not the fail operator is used.
- - - - -
dcb7fe5a by John Ericson at 2020-04-22T23:10:28-04:00
Remove panic in dsHandleMonadicFailure
Rework dsHandleMonadicFailure to be correct by construction instead of
using an unreachable panic.
- - - - -
cde23cd4 by John Ericson at 2020-04-22T23:10:28-04:00
Inline `adjustMatchResult`
It is just `fmap`
- - - - -
72cb6bcc by John Ericson at 2020-04-22T23:10:28-04:00
Generalize type of `matchCanFail`
- - - - -
401f7bb3 by John Ericson at 2020-04-22T23:10:28-04:00
`MatchResult'` -> `MatchResult`
Inline `MatchResult` alias accordingly.
- - - - -
6c9fae23 by Alexis King at 2020-04-22T23:11:12-04:00
Mark DataCon wrappers CONLIKE
Now that DataCon wrappers don’t inline until phase 0 (see commit
b78cc64e923716ac0512c299f42d4d0012306c05), it’s important that
case-of-known-constructor and RULE matching be able to see saturated
applications of DataCon wrappers in unfoldings. Making them conlike is a
natural way to do it, since they are, in fact, precisely the sort of
thing the CONLIKE pragma exists to solve.
Fixes #18012.
This also bumps the version of the parsec submodule to incorporate a
patch that avoids a metric increase on the haddock perf tests. The
increase was not really a flaw in this patch, as parsec was implicitly
relying on inlining heuristics. The patch to parsec just adds some
INLINABLE pragmas, and we get a nice performance bump out of it (well
beyond the performance we lost from this patch).
Metric Decrease:
T12234
WWRec
haddock.Cabal
haddock.base
haddock.compiler
- - - - -
48b8951e by Roland Senn at 2020-04-22T23:11:51-04:00
Fix tab-completion for :break (#17989)
In tab-completion for the `:break` command, only those
identifiers should be shown, that are accepted in the
`:break` command. Hence these identifiers must be
- defined in an interpreted module
- top-level
- currently in scope
- listed in a `ModBreaks` value as a possible breakpoint.
The identifiers my be qualified or unqualified.
To get all possible top-level breakpoints for tab-completeion
with the correct qualification do:
1. Build the list called `pifsBreaks` of all pairs of
(Identifier, module-filename) from the `ModBreaks` values.
Here all identifiers are unqualified.
2. Build the list called `pifInscope` of all pairs of
(Identifiers, module-filename) with identifiers from
the `GlobalRdrEnv`. Take only those identifiers that are
in scope and have the correct prefix.
Here the identifiers may be qualified.
3. From the `pifInscope` list seclect all pairs that can be
found in the `pifsBreaks` list, by comparing only the
unqualified part of the identifier.
The remaining identifiers can be used for tab-completion.
This ensures, that we show only identifiers, that can be used
in a `:break` command.
- - - - -
34a45ee6 by Peter Trommler at 2020-04-22T23:12:27-04:00
PPC NCG: Add DWARF constants and debug labels
Fixes #11261
- - - - -
ffde2348 by Simon Peyton Jones at 2020-04-22T23:13:06-04:00
Do eager instantation in terms
This patch implements eager instantiation, a small but critical change
to the type inference engine, #17173. The main change is this:
When inferring types, always return an instantiated type
(for now, deeply instantiated; in future shallowly instantiated)
There is more discussion in
https://www.tweag.io/posts/2020-04-02-lazy-eager-instantiation.html
There is quite a bit of refactoring in this patch:
* The ir_inst field of GHC.Tc.Utils.TcType.InferResultk
has entirely gone. So tcInferInst and tcInferNoInst have collapsed
into tcInfer.
* Type inference of applications, via tcInferApp and
tcInferAppHead, are substantially refactored, preparing
the way for Quick Look impredicativity.
* New pure function GHC.Tc.Gen.Expr.collectHsArgs and applyHsArgs
are beatifully dual. We can see the zipper!
* GHC.Tc.Gen.Expr.tcArgs is now much nicer; no longer needs to return
a wrapper
* In HsExpr, HsTypeApp now contains the the actual type argument,
and is used in desugaring, rather than putting it in a mysterious
wrapper.
* I struggled a bit with good error reporting in
Unify.matchActualFunTysPart. It's a little bit simpler than before,
but still not great.
Some smaller things
* Rename tcPolyExpr --> tcCheckExpr
tcMonoExpr --> tcLExpr
* tcPatSig moves from GHC.Tc.Gen.HsType to GHC.Tc.Gen.Pat
Metric Decrease:
T9961
Reduction of 1.6% in comiler allocation on T9961, I think.
- - - - -
6f84aca3 by Ben Gamari at 2020-04-22T23:13:43-04:00
rts: Ensure that sigaction structs are initialized
I noticed these may have uninitialized fields when looking into #18037.
The reporter says that zeroing them doesn't fix the MSAN failures they
observe but zeroing them is the right thing to do regardless.
- - - - -
c29f0fa6 by Andreas Klebinger at 2020-04-22T23:14:21-04:00
Add "ddump-cmm-opt" as alias for "ddump-opt-cmm".
- - - - -
4b4a8b60 by Ben Gamari at 2020-04-22T23:14:57-04:00
llvmGen: Remove -fast-llvm flag
Issue #18076 drew my attention to the undocumented `-fast-llvm` flag for
the LLVM code generator introduced in
22733532171330136d87533d523f565f2a4f102f. Speaking to Moritz about this,
the motivation for this flag was to avoid potential incompatibilities
between LLVM and the assembler/linker toolchain by making LLVM
responsible for machine-code generation.
Unfortunately, this cannot possibly work: the LLVM backend's mangler
performs a number of transforms on the assembler generated by LLVM that
are necessary for correctness. These are currently:
* mangling Haskell functions' symbol types to be `object` instead of
`function` on ELF platforms (necessary for tables-next-to-code)
* mangling AVX instructions to ensure that we don't assume alignment
(which LLVM otherwise does)
* mangling Darwin's subsections-via-symbols directives
Given that these are all necessary I don't believe that we can support
`-fast-llvm`. Let's rather remove it.
- - - - -
831b6642 by Moritz Angermann at 2020-04-22T23:15:33-04:00
Fix build warning; add more informative information to the linker; fix linker for empty sections
- - - - -
c409961a by Ryan Scott at 2020-04-22T23:16:12-04:00
Update commentary and slightly refactor GHC.Tc.Deriv.Infer
There was some out-of-date commentary in `GHC.Tc.Deriv.Infer` that
has been modernized. Along the way, I removed the `bad` constraints
in `simplifyDeriv`, which did not serve any useful purpose (besides
being printed in debugging output).
Fixes #18073.
- - - - -
125aa2b8 by Ömer Sinan Ağacan at 2020-04-22T23:16:51-04:00
Remove leftover comment in tcRnModule', redundant bind
The code for the comment was moved in dc8c03b2a5c but the comment was
forgotten.
- - - - -
8ea37b01 by Sylvain Henry at 2020-04-22T23:17:34-04:00
RTS: workaround a Linux kernel bug in timerfd
Reading a timerfd may return 0: https://lkml.org/lkml/2019/8/16/335.
This is currently undocumented behavior and documentation "won't happen
anytime soon" (https://lkml.org/lkml/2020/2/13/295).
With this patch, we just ignore the result instead of crashing. It may
fix #18033 but we can't be sure because we don't have enough
information.
See also this discussion about the kernel bug:
https://github.com/Azure/sonic-swss-common/pull/302/files/1f070e7920c2e5d63316c0105bf4481e73d72dc9
- - - - -
cd8409c2 by Ryan Scott at 2020-04-23T11:39:24-04:00
Create di_scoped_tvs for associated data family instances properly
See `Note [Associated data family instances and di_scoped_tvs]` in
`GHC.Tc.TyCl.Instance`, which explains all of the moving parts.
Fixes #18055.
- - - - -
339e8ece by Ben Gamari at 2020-04-23T11:40:02-04:00
hadrian/ghci: Allow arguments to be passed to GHCi
Previously the arguments passed to hadrian/ghci were passed both to
`hadrian` and GHCi. This is rather odd given that there are essentially
not arguments in the intersection of the two. Let's just pass them to
GHCi; this allows `hadrian/ghci -Werror`.
- - - - -
5946c85a by Ben Gamari at 2020-04-23T11:40:38-04:00
testsuite: Don't attempt to read .std{err,out} files if they don't exist
Simon reports that he was previously seeing framework failures due to
an attempt to read the non-existing T13456.stderr. While I don't know
exactly what this is due to, it does seem like a non-existing
.std{out,err} file should be equivalent to an empty file. Teach the
testsuite driver to treat it as such.
- - - - -
c42754d5 by John Ericson at 2020-04-23T18:32:43-04:00
Trees That Grow refactor for `ConPat` and `CoPat`
- `ConPat{In,Out}` -> `ConPat`
- `CoPat` -> `XPat (CoPat ..)`
Note that `GHC.HS.*` still uses `HsWrap`, but only when `p ~ GhcTc`.
After this change, moving the type family instances out of `GHC.HS.*` is
sufficient to break the cycle.
Add XCollectPat class to decide how binders are collected from XXPat based on the pass.
Previously we did this with IsPass, but that doesn't work for Haddock's
DocNameI, and the constraint doesn't express what actual distinction is being
made. Perhaps a class for collecting binders more generally is in order, but we
haven't attempted this yet.
Pure refactor of code around ConPat
- InPat/OutPat synonyms removed
- rename several identifiers
- redundant constraints removed
- move extension field in ConPat to be first
- make ConPat use record syntax more consistently
Fix T6145 (ConPatIn became ConPat)
Add comments from SPJ.
Add comment about haddock's use of CollectPass.
Updates haddock submodule.
- - - - -
72da0c29 by mniip at 2020-04-23T18:33:21-04:00
Add :doc to GHC.Prim
- - - - -
2c23e2e3 by mniip at 2020-04-23T18:33:21-04:00
Include docs for non-primop entries in primops.txt as well
- - - - -
0ac29c88 by mniip at 2020-04-23T18:33:21-04:00
GHC.Prim docs: note and test
- - - - -
b0fbfc75 by John Ericson at 2020-04-24T12:07:14-04:00
Switch order on `GhcMake.IsBoot`
In !1798 we were requested to replace many `Bool`s with this data type.
But those bools had `False` meaning `NotBoot`, so the `Ord` instance
would be flipped if we use this data-type as-is.
Since the planned formally-`Bool` occurrences vastly outnumber the
current occurrences, we figured it would be better to conform the `Ord`
instance to how the `Bool` is used now, fixing any issues, rather than
fix them currently with the bigger refactor later in !1798. That way,
!1798 can be a "pure" refactor with no behavioral changes.
- - - - -
af332442 by Sylvain Henry at 2020-04-26T13:55:14-04:00
Modules: Utils and Data (#13009)
Update Haddock submodule
Metric Increase:
haddock.compiler
- - - - -
cd4434c8 by Sylvain Henry at 2020-04-26T13:55:16-04:00
Fix misleading Ptr phantom type in SerializedCompact (#15653)
- - - - -
22bf5c73 by Ömer Sinan Ağacan at 2020-04-26T13:55:22-04:00
Tweak includes in non-moving GC headers
We don't use hash tables in non-moving GC so remove the includes.
This breaks Compact.c as existing includes no longer include Hash.h, so
include Hash.h explicitly in Compact.c.
- - - - -
99823ed2 by Sylvain Henry at 2020-04-27T20:24:46-04:00
TH: fix Show/Eq/Ord instances for Bytes (#16457)
We shouldn't compare pointer values but the actual bytes.
- - - - -
c62271a2 by Alp Mestanogullari at 2020-04-27T20:25:33-04:00
hadrian: always capture both stdout and stderr when running a builder fails
The idea being that when a builder('s command) fails, we quite likely want to
have all the information available to figure out why. Depending on the builder
_and_ the particular problem, the useful bits of information can be printed
on stdout or stderr.
We accomplish this by defining a simple wrapper for Shake's `cmd` function,
that just _always_ captures both streams in case the command returns a non-zero
exit code, and by using this wrapper everywhere in `hadrian/src/Builder.hs`.
Fixes #18089.
- - - - -
4b9764db by Ryan Scott at 2020-04-28T15:40:04-04:00
Define a Quote IO instance
Fixes #18103.
- - - - -
518a63d4 by Ryan Scott at 2020-04-28T15:40:42-04:00
Make boxed 1-tuples have known keys
Unlike other tuples, which use special syntax and are "known" by way
of a special `isBuiltInOcc_maybe` code path, boxed 1-tuples do not
use special syntax. Therefore, in order to make sure that the
internals of GHC are aware of the `data Unit a = Unit a` definition
in `GHC.Tuple`, we give `Unit` known keys. For the full details, see
`Note [One-tuples] (Wrinkle: Make boxed one-tuple names have known keys)`
in `GHC.Builtin.Types`.
Fixes #18097.
- - - - -
2cfc4ab9 by Sylvain Henry at 2020-04-30T01:56:56-04:00
Document backpack fields in DynFlags
- - - - -
10a2ba90 by Sylvain Henry at 2020-04-30T01:56:56-04:00
Refactor UnitInfo
* Rename InstalledPackageInfo into GenericUnitInfo
The name InstalledPackageInfo is only kept for alleged backward
compatibility reason in Cabal. ghc-boot has its own stripped down copy
of this datatype but it doesn't need to keep the name. Internally we
already use type aliases (UnitInfo in GHC, PackageCacheFormat in
ghc-pkg).
* Rename UnitInfo fields: add "unit" prefix and fix misleading names
* Add comments on every UnitInfo field
* Rename SourcePackageId into PackageId
"Package" already indicates that it's a "source package". Installed
package components are called units.
Update Haddock submodule
- - - - -
69562e34 by Sylvain Henry at 2020-04-30T01:56:56-04:00
Remove unused `emptyGenericUnitInfo`
- - - - -
9e2c8e0e by Sylvain Henry at 2020-04-30T01:56:56-04:00
Refactor UnitInfo load/store from databases
Converting between UnitInfo stored in package databases and UnitInfo as
they are used in ghc-pkg and ghc was done in a very convoluted way (via
BinaryStringRep and DbUnitModuleRep type classes using fun deps, etc.).
It was difficult to understand and even more to modify (I wanted to
try to use a GADT for UnitId but fun deps got in the way).
The new code uses much more straightforward functions to convert between
the different representations. Much simpler.
- - - - -
ea717aa4 by Sylvain Henry at 2020-04-30T01:56:56-04:00
Factorize mungePackagePaths code
This patch factorizes the duplicated code used in ghc-pkg and in GHC to
munge package paths/urls.
It also fixes haddock-html munging in GHC (allowed to be either a file
or a url) to mimic ghc-pkg behavior.
- - - - -
10d15f1e by Sylvain Henry at 2020-04-30T01:56:56-04:00
Refactoring unit management code
Over the years the unit management code has been modified a lot to keep
up with changes in Cabal (e.g. support for several library components in
the same package), to integrate BackPack, etc. I found it very hard to
understand as the terminology wasn't consistent, was referring to past
concepts, etc.
The terminology is now explained as clearly as I could in the Note
"About Units" and the code is refactored to reflect it.
-------------------
Many names were misleading: UnitId is not an Id but could be a virtual
unit (an indefinite one instantiated on the fly), IndefUnitId
constructor may contain a definite instantiated unit, etc.
* Rename IndefUnitId into InstantiatedUnit
* Rename IndefModule into InstantiatedModule
* Rename UnitId type into Unit
* Rename IndefiniteUnitId constructor into VirtUnit
* Rename DefiniteUnitId constructor into RealUnit
* Rename packageConfigId into mkUnit
* Rename getPackageDetails into unsafeGetUnitInfo
* Rename InstalledUnitId into UnitId
Remove references to misleading ComponentId: a ComponentId is just an
indefinite unit-id to be instantiated.
* Rename ComponentId into IndefUnitId
* Rename ComponentDetails into UnitPprInfo
* Fix display of UnitPprInfo with empty version: this is now used for
units dynamically generated by BackPack
Generalize several types (Module, Unit, etc.) so that they can be used
with different unit identifier types: UnitKey, UnitId, Unit, etc.
* GenModule: Module, InstantiatedModule and InstalledModule are now
instances of this type
* Generalize DefUnitId, IndefUnitId, Unit, InstantiatedUnit,
PackageDatabase
Replace BackPack fake "hole" UnitId by a proper HoleUnit constructor.
Add basic support for UnitKey. They should be used more in the future to
avoid mixing them up with UnitId as we do now.
Add many comments.
Update Haddock submodule
- - - - -
8bfb0219 by Sylvain Henry at 2020-04-30T01:56:56-04:00
Unit: split and rename modules
Introduce GHC.Unit.* hierarchy for everything concerning units, packages
and modules.
Update Haddock submodule
- - - - -
71484b09 by Alexis King at 2020-04-30T01:57:35-04:00
Allow block arguments in arrow control operators
Arrow control operators have their own entries in the grammar, so they
did not cooperate with BlockArguments. This was just a minor oversight,
so this patch adjusts the grammar to add the desired behavior.
fixes #18050
- - - - -
a48cd2a0 by Alexis King at 2020-04-30T01:57:35-04:00
Allow LambdaCase to be used as a command in proc notation
- - - - -
f4d3773c by Alexis King at 2020-04-30T01:57:35-04:00
Document BlockArguments/LambdaCase support in arrow notation
- - - - -
5bdfdd13 by Simon Peyton Jones at 2020-04-30T01:58:15-04:00
Add tests for #17873
- - - - -
19b701c2 by Simon Peyton Jones at 2020-04-30T07:30:13-04:00
Mark rule args as non-tail-called
This was just an omission...b I'd failed to call markAllNonTailCall on
rule args. I think this bug has been here a long time, but it's quite
hard to trigger.
Fixes #18098
- - - - -
014ef4a3 by Matthew Pickering at 2020-04-30T07:30:50-04:00
Hadrian: Improve tool-args command to support more components
There is a new command to hadrian, tool:path/to/file.hs, which returns
the options needed to compile that file in GHCi.
This is now used in the ghci script with argument `ghc/Main.hs` but its
main purpose is to support the new multi-component branch of ghcide.
- - - - -
2aa67611 by Ben Gamari at 2020-04-30T21:34:44-04:00
nonmoving: Clear bitmap after initializing block size
Previously nonmovingInitSegment would clear the bitmap before
initializing the segment's block size. This is broken since
nonmovingClearBitmap looks at the segment's block size to determine how
much bitmap to clear.
- - - - -
54dad3cf by Ben Gamari at 2020-04-30T21:34:44-04:00
nonmoving: Explicitly memoize block count
A profile cast doubt on whether the compiler hoisted the bound out the
loop as I would have expected here. It turns out it did but nevertheless
it seems clearer to just do this manually.
- - - - -
99ff8145 by Ben Gamari at 2020-04-30T21:34:44-04:00
nonmoving: Eagerly flush all capabilities' update remembered sets
(cherry picked from commit 2fa79119570b358a4db61446396889b8260d7957)
- - - - -
05b0a9fd by Ömer Sinan Ağacan at 2020-04-30T21:35:24-04:00
Remove OneShotInfo field of LFReEntrant, document OneShotInfo
The field is only used in withNewTickyCounterFun and it's easier to
directly pass a parameter for one-shot info to withNewTickyCounterFun
instead of passing it via LFReEntrant. This also makes !2842 simpler.
Other changes:
- New Note (by SPJ) [OneShotInfo overview] added.
- Arity argument of thunkCode removed as it's always 0.
- - - - -
a43620c6 by Ömer Sinan Ağacan at 2020-04-30T21:35:24-04:00
GHC.StgToCmm.Ticky: remove a few unused stuff
- - - - -
780de9e1 by Sylvain Henry at 2020-05-01T10:37:39-04:00
Use platform in Iface Binary
- - - - -
f8386c7b by Sylvain Henry at 2020-05-01T10:37:39-04:00
Refactor PprDebug handling
If `-dppr-debug` is set, then PprUser and PprDump styles are silently
replaced with PprDebug style. This was done in `mkUserStyle` and
`mkDumpStyle` smart constructors. As a consequence they needed a
DynFlags parameter.
Now we keep the original PprUser and PprDump styles until they are used
to create an `SDocContext`. I.e. the substitution is only performed in
`initSDocContext`.
- - - - -
b3df9e78 by Sylvain Henry at 2020-05-01T10:37:39-04:00
Remove PprStyle param of logging actions
Use `withPprStyle` instead to apply a specific style to a SDoc.
- - - - -
de9fc995 by Sylvain Henry at 2020-05-01T10:37:39-04:00
Fully remove PprDebug
PprDebug was a pain to deal with consistently as it is implied by
`-dppr-debug` but it isn't really a PprStyle. We remove it completely
and query the appropriate SDoc flag instead (`sdocPprDebug`) via
helpers (`getPprDebug` and its friends).
- - - - -
8b51fcbd by Sebastian Graf at 2020-05-01T10:38:16-04:00
PmCheck: Only call checkSingle if we would report warnings
- - - - -
fd7ea0fe by Sebastian Graf at 2020-05-01T10:38:16-04:00
PmCheck: Pick up `EvVar`s bound in `HsWrapper`s for long-distance info
`HsWrapper`s introduce evidence bindings through `WpEvLam` which the
pattern-match coverage checker should be made aware of.
Failing to do so caused #18049, where the resulting impreciseness of
imcompleteness warnings seemingly contradicted with
`-Winaccessible-code`.
The solution is simple: Collect all the evidence binders of an
`HsWrapper` and add it to the ambient `Deltas` before desugaring
the wrapped expression.
But that means we pick up many more evidence bindings, even when they
wrap around code without a single pattern match to check! That regressed
`T3064` by over 300%, so now we are adding long-distance info lazily
through judicious use of `unsafeInterleaveIO`.
Fixes #18049.
- - - - -
7bfe9ac5 by Ben Gamari at 2020-05-03T04:41:33-04:00
rts: Enable tracing of nonmoving heap census with -ln
Previously this was not easily available to the user. Fix this.
Non-moving collection lifecycle events are now reported with -lg.
- - - - -
c560dd07 by Ben Gamari at 2020-05-03T04:41:33-04:00
users guide: Move eventlog documentation users guide
- - - - -
02543d5e by Ben Gamari at 2020-05-03T04:41:33-04:00
users guide: Add documentation for non-moving GC events
- - - - -
b465dd45 by Alexis King at 2020-05-03T04:42:12-04:00
Flatten nested casts in the simple optimizer
Normally, we aren’t supposed to generated any nested casts, since mkCast
takes care to flatten them, but the simple optimizer didn’t use mkCast,
so they could show up after inlining. This isn’t really a problem, since
the simplifier will clean them up immediately anyway, but it can clutter
the -ddump-ds output, and it’s an extremely easy fix.
closes #18112
- - - - -
8bdc03d6 by Simon Peyton Jones at 2020-05-04T01:56:59-04:00
Don't return a panic in tcNestedSplice
In GHC.Tc.Gen.Splice.tcNestedSplice we were returning a
typechecked expression of "panic". That is usually OK, because
the result is discarded. But it happens that tcApp now looks at
the typechecked expression, trivially, to ask if it is tagToEnum.
So being bottom is bad.
Moreover a debug-trace might print it out.
So better to return a civilised expression, even though it is
usually discarded.
- - - - -
0bf640b1 by Baldur Blöndal at 2020-05-04T01:57:36-04:00
Don't require parentheses around via type (`-XDerivingVia'). Fixes #18130".
- - - - -
30272412 by Artem Pelenitsyn at 2020-05-04T13:19:59-04:00
Remove custom ExceptionMonad class (#18075) (updating haddock submodule accordingly)
- - - - -
b9f7c08f by jneira at 2020-05-04T13:20:37-04:00
Remove unused hs-boot file
- - - - -
1d8f80cd by Sylvain Henry at 2020-05-05T03:22:46-04:00
Remove references to -package-key
* remove references to `-package-key` which has been removed in 2016
(240ddd7c39536776e955e881d709bbb039b48513)
* remove support for `-this-package-key` which has been deprecated at the
same time
- - - - -
7bc3a65b by Sylvain Henry at 2020-05-05T03:23:31-04:00
Remove SpecConstrAnnotation (#13681)
This has been deprecated since 2013. Use GHC.Types.SPEC instead.
Make GHC.Exts "not-home" for haddock
Metric Decrease:
haddock.base
- - - - -
3c862f63 by DenisFrezzato at 2020-05-05T03:24:15-04:00
Fix Haskell98 short description in documentation
- - - - -
2420c555 by Ryan Scott at 2020-05-05T03:24:53-04:00
Add regression tests for #16244, #16245, #16758
Commit e3c374cc5bd7eb49649b9f507f9f7740697e3f70 ended up
fixing quite a few bugs:
* This commit fixes #16244 completely. A regression test has been
added.
* This commit fixes one program from #16245. (The program in
https://gitlab.haskell.org/ghc/ghc/issues/16245#note_211369 still
panics, and the program in
https://gitlab.haskell.org/ghc/ghc/issues/16245#note_211400 still
loops infinitely.) A regression test has been added for this
program.
* This commit fixes #16758. Accordingly, this patch removes the
`expect_broken` label from the `T16758` test case, moves it from
`should_compile` to `should_fail` (as it should produce an error
message), and checks in the expected stderr.
- - - - -
40c71c2c by Sylvain Henry at 2020-05-05T03:25:31-04:00
Fix colorized error messages (#18128)
In b3df9e780fb2f5658412c644849cd0f1e6f50331 I broke colorized messages
by using "dump" style instead of "user" style. This commits fixes it.
- - - - -
7ab6ab09 by Richard Eisenberg at 2020-05-06T04:39:32-04:00
Refactor hole constraints.
Previously, holes (both expression holes / out of scope variables and
partial-type-signature wildcards) were emitted as *constraints* via
the CHoleCan constructor. While this worked fine for error reporting,
there was a fair amount of faff in keeping these constraints in line.
In particular, and unlike other constraints, we could never change
a CHoleCan to become CNonCanonical. In addition:
* the "predicate" of a CHoleCan constraint was really the type
of the hole, which is not a predicate at all
* type-level holes (partial type signature wildcards) carried
evidence, which was never used
* tcNormalise (used in the pattern-match checker) had to create
a hole constraint just to extract it again; it was quite messy
The new approach is to record holes directly in WantedConstraints.
It flows much more nicely now.
Along the way, I did some cleaning up of commentary in
GHC.Tc.Errors.Hole, which I had a hard time understanding.
This was instigated by a future patch that will refactor
the way predicates are handled. The fact that CHoleCan's
"predicate" wasn't really a predicate is incompatible with
that future patch.
No test case, because this is meant to be purely internal.
It turns out that this change improves the performance of
the pattern-match checker, likely because fewer constraints
are sloshing about in tcNormalise. I have not investigated
deeply, but an improvement is not a surprise here:
-------------------------
Metric Decrease:
PmSeriesG
-------------------------
- - - - -
420b957d by Ben Gamari at 2020-05-06T04:40:08-04:00
rts: Zero block flags with -DZ
Block flags are very useful for determining the state of a block.
However, some block allocator users don't touch them, leading to
misleading values. Ensure that we zero then when zero-on-gc is set. This
is safe and makes the flags more useful during debugging.
- - - - -
740b3b8d by Ben Gamari at 2020-05-06T04:40:08-04:00
nonmoving: Fix incorrect failed_to_evac value during deadlock gc
Previously we would incorrectly set the failed_to_evac flag if we
evacuated a value due to a deadlock GC. This would cause us to mark more
things as dirty than strictly necessary. It also turned up a nasty but
which I will fix next.
- - - - -
b2d72c75 by Ben Gamari at 2020-05-06T04:40:08-04:00
nonmoving: Fix handling of dirty objects
Previously we (incorrectly) relied on failed_to_evac to be "precise".
That is, we expected it to only be true if *all* of an object's fields
lived outside of the non-moving heap. However, does not match the
behavior of failed_to_evac, which is true if *any* of the object's
fields weren't promoted (meaning that some others *may* live in the
non-moving heap).
This is problematic as we skip the non-moving write barrier for dirty
objects (which we can only safely do if *all* fields point outside of
the non-moving heap).
Clearly this arises due to a fundamental difference in the behavior
expected of failed_to_evac in the moving and non-moving collector.
e.g., in the moving collector it is always safe to conservatively say
failed_to_evac=true whereas in the non-moving collector the safe value
is false.
This issue went unnoticed as I never wrote down the dirtiness
invariant enforced by the non-moving collector. We now define this
invariant as
An object being marked as dirty implies that all of its fields are
on the mark queue (or, equivalently, update remembered set).
To maintain this invariant we teach nonmovingScavengeOne to push the
fields of objects which we fail to evacuate to the update remembered
set. This is a simple and reasonably cheap solution and avoids the
complexity and fragility that other, more strict alternative invariants
would require.
All of this is described in a new Note, Note [Dirty flags in the
non-moving collector] in NonMoving.c.
- - - - -
9f3e6884 by Zubin Duggal at 2020-05-06T04:41:08-04:00
Allow atomic update of NameCache in readHieFile
The situation arises in ghcide where multiple different threads may need to
update the name cache, therefore with the older interface it could happen
that you start reading a hie file with name cache A and produce name cache
A + B, but another thread in the meantime updated the namecache to A +
C. Therefore if you write the new namecache you will lose the A' updates
from the second thread.
Updates haddock submodule
- - - - -
edec6a6c by Ryan Scott at 2020-05-06T04:41:57-04:00
Make isTauTy detect higher-rank contexts
Previously, `isTauTy` would only detect higher-rank `forall`s, not
higher-rank contexts, which led to some minor bugs observed
in #18127. Easily fixed by adding a case for
`(FunTy InvisArg _ _)`.
Fixes #18127.
- - - - -
a95e7fe0 by Ömer Sinan Ağacan at 2020-05-06T04:42:39-04:00
ELF linker: increment curSymbol after filling in fields of current entry
The bug was introduced in a8b7cef4d45 which added a field to the
`symbols` array elements and then updated this code incorrectly:
- oc->symbols[curSymbol++] = nm;
+ oc->symbols[curSymbol++].name = nm;
+ oc->symbols[curSymbol].addr = symbol->addr;
- - - - -
cab1871a by Sylvain Henry at 2020-05-06T04:43:21-04:00
Move LeadingUnderscore into Platform (#17957)
Avoid direct use of DynFlags to know if symbols must be prefixed by an
underscore.
- - - - -
94e7c563 by Sylvain Henry at 2020-05-06T04:43:21-04:00
Don't use DynFlags in showLinkerState (#17957)
- - - - -
9afd9251 by Ryan Scott at 2020-05-06T04:43:58-04:00
Refactoring: Use bindSigTyVarsFV in rnMethodBinds
`rnMethodBinds` was explicitly using `xoptM` to determine if
`ScopedTypeVariables` is enabled before bringing type variables
bound by the class/instance header into scope. However, this `xoptM`
logic is already performed by the `bindSigTyVarsFV` function. This
patch uses `bindSigTyVarsFV` in `rnMethodBinds` to reduce the number
of places where we need to consult if `ScopedTypeVariables` is on.
This is purely refactoring, and there should be no user-visible
change in behavior.
- - - - -
6f6d72b2 by Brian Foley at 2020-05-08T15:29:25-04:00
Remove further dead code found by a simple Python script.
Avoid removing some functions that are part of an API even
though they're not used in-tree at the moment.
- - - - -
78bf8bf9 by Julien Debon at 2020-05-08T15:29:28-04:00
Add doc examples for Bifoldable
See #17929
- - - - -
66f0a847 by Julien Debon at 2020-05-08T15:29:29-04:00
doc (Bitraversable): Add examples to Bitraversable
* Add examples to Data.Bitraversable
* Fix formatting for (,) in Bitraversable and Bifoldable
* Fix mistake on bimapAccumR documentation
See #17929
- - - - -
9749fe12 by Baldur Blöndal at 2020-05-08T15:29:32-04:00
Specify kind variables for inferred kinds in base.
- - - - -
4e9aef9e by John Ericson at 2020-05-08T15:29:36-04:00
HsSigWcTypeScoping: Pull in documentation from stray location
- - - - -
f4d5c6df by John Ericson at 2020-05-08T15:29:36-04:00
Rename local `real_fvs` to `implicit_vs`
It doesn't make sense to call the "free" variables we are about to
implicitly bind the real ones.
- - - - -
20570b4b by John Ericson at 2020-05-08T15:29:36-04:00
A few tiny style nits with renaming
- Use case rather than guards that repeatedly scrutenize same thing.
- No need for view pattern when `L` is fine.
- Use type synnonym to convey the intent like elsewhere.
- - - - -
09ac8de5 by John Ericson at 2020-05-08T15:29:36-04:00
Add `forAllOrNothing` function with note
- - - - -
bb35c0e5 by Joseph C. Sible at 2020-05-08T15:29:40-04:00
Document lawlessness of Ap's Num instance
- - - - -
cdd229ff by Joseph C. Sible at 2020-05-08T15:29:40-04:00
Apply suggestion to libraries/base/Data/Monoid.hs
- - - - -
926d2aab by Joseph C. Sible at 2020-05-08T15:29:40-04:00
Apply more suggestions from Simon Jakobi
- - - - -
7a763cff by Adam Gundry at 2020-05-08T15:29:41-04:00
Reject all duplicate declarations involving DuplicateRecordFields (fixes #17965)
This fixes a bug that resulted in some programs being accepted that used the same
identifier as a field label and another declaration, depending on the order they
appeared in the source code.
- - - - -
88e3c815 by Simon Peyton Jones at 2020-05-08T15:29:41-04:00
Fix specialisation for DFuns
When specialising a DFun we must take care to saturate the
unfolding. See Note [Specialising DFuns] in Specialise.
Fixes #18120
- - - - -
86c77b36 by Greg Steuck at 2020-05-08T15:29:45-04:00
Remove unused SEGMENT_PROT_RWX
It's been unused for a year and is problematic on any OS which
requires W^X for security.
- - - - -
9d97f4b5 by nineonine at 2020-05-08T15:30:03-04:00
Add test for #16167
- - - - -
aa318338 by Ryan Scott at 2020-05-08T15:30:04-04:00
Bump exceptions submodule so that dist-boot is .gitignore'd
`exceptions` is a stage-0 boot library as of commit
30272412fa437ab8e7a8035db94a278e10513413, which means that building
`exceptions` in a GHC tree will generate a `dist-boot` directory.
However, this directory was not specified in `exceptions`'
`.gitignore` file, which causes it to dirty up the current `git`
working directory.
Accordingly, this bumps the `exceptions` submodule to commit
ghc/packages/exceptions at 23c0b8a50d7592af37ca09beeec16b93080df98f,
which adds `dist-boot` to the `.gitignore` file.
- - - - -
ea86360f by Ömer Sinan Ağacan at 2020-05-08T15:30:30-04:00
Linker.c: initialize n_symbols of ObjectCode with other fields
- - - - -
951c1fb0 by Sylvain Henry at 2020-05-09T21:46:38-04:00
Fix unboxed-sums GC ptr-slot rubbish value (#17791)
This patch allows boot libraries to use unboxed sums without implicitly
depending on `base` package because of `absentSumFieldError`.
See updated Note [aBSENT_SUM_FIELD_ERROR_ID] in GHC.Core.Make
- - - - -
b352d63c by Ben Gamari at 2020-05-09T21:47:14-04:00
rts: Make non-existent linker search path merely a warning
As noted in #18105, previously this resulted in a rather intrusive error
message. This is in contrast to the general expectation that search
paths are merely places to look, not places that must exist.
Fixes #18105.
- - - - -
cf4f1e2f by Ben Gamari at 2020-05-13T02:02:33-04:00
rts/CNF: Fix fixup comparison function
Previously we would implicitly convert the difference between two words
to an int, resulting in an integer overflow on 64-bit machines.
Fixes #16992
- - - - -
a03da9bf by Ömer Sinan Ağacan at 2020-05-13T02:03:16-04:00
Pack some of IdInfo fields into a bit field
This reduces residency of compiler quite a bit on some programs.
Example stats when building T10370:
Before:
2,871,242,832 bytes allocated in the heap
4,693,328,008 bytes copied during GC
33,941,448 bytes maximum residency (276 sample(s))
375,976 bytes maximum slop
83 MiB total memory in use (0 MB lost due to fragmentation)
After:
2,858,897,344 bytes allocated in the heap
4,629,255,440 bytes copied during GC
32,616,624 bytes maximum residency (278 sample(s))
314,400 bytes maximum slop
80 MiB total memory in use (0 MB lost due to fragmentation)
So -3.9% residency, -1.3% bytes copied and -0.4% allocations.
Fixes #17497
Metric Decrease:
T9233
T9675
- - - - -
670c3e5c by Ben Gamari at 2020-05-13T02:03:54-04:00
get-win32-tarballs: Fix base URL
Revert a change previously made for testing purposes.
- - - - -
8ad8dc41 by Ben Gamari at 2020-05-13T02:03:54-04:00
get-win32-tarballs: Improve diagnostics output
- - - - -
8c0740b7 by Simon Jakobi at 2020-05-13T02:04:33-04:00
docs: Add examples for Data.Semigroup.Arg{Min,Max}
Context: #17153
- - - - -
cb22348f by Ben Gamari at 2020-05-13T02:05:11-04:00
Add few cleanups of the CAF logic
Give the NameSet of non-CAFfy names a proper newtype to distinguish it
from all of the other NameSets floating about.
- - - - -
90e38b81 by Emeka Nkurumeh at 2020-05-13T02:05:51-04:00
fix printf warning when using with ghc with clang on mingw
- - - - -
86d8ac22 by Sebastian Graf at 2020-05-13T02:06:29-04:00
CprAnal: Don't attach CPR sigs to expandable bindings (#18154)
Instead, look through expandable unfoldings in `cprTransform`.
See the new Note [CPR for expandable unfoldings]:
```
Long static data structures (whether top-level or not) like
xs = x1 : xs1
xs1 = x2 : xs2
xs2 = x3 : xs3
should not get CPR signatures, because they
* Never get WW'd, so their CPR signature should be irrelevant after analysis
(in fact the signature might even be harmful for that reason)
* Would need to be inlined/expanded to see their constructed product
* Recording CPR on them blows up interface file sizes and is redundant with
their unfolding. In case of Nested CPR, this blow-up can be quadratic!
But we can't just stop giving DataCon application bindings the CPR property,
for example
fac 0 = 1
fac n = n * fac (n-1)
fac certainly has the CPR property and should be WW'd! But FloatOut will
transform the first clause to
lvl = 1
fac 0 = lvl
If lvl doesn't have the CPR property, fac won't either. But lvl doesn't have a
CPR signature to extrapolate into a CPR transformer ('cprTransform'). So
instead we keep on cprAnal'ing through *expandable* unfoldings for these arity
0 bindings via 'cprExpandUnfolding_maybe'.
In practice, GHC generates a lot of (nested) TyCon and KindRep bindings, one
for each data declaration. It's wasteful to attach CPR signatures to each of
them (and intractable in case of Nested CPR).
```
Fixes #18154.
- - - - -
e34bf656 by Ben Gamari at 2020-05-13T02:07:08-04:00
users-guide: Add discussion of shared object naming
Fixes #18074.
- - - - -
5d0f2445 by Ben Gamari at 2020-05-13T02:07:47-04:00
testsuite: Print sign of performance changes
Executes the minor formatting change in the tabulated performance
changes suggested in #18135.
- - - - -
9e4b981f by Ben Gamari at 2020-05-13T02:08:24-04:00
testsuite: Add testcase for #18129
- - - - -
266310c3 by Ivan-Yudin at 2020-05-13T02:09:03-04:00
doc: Reformulate the opening paragraph of Ch. 4 in User's guide
Removes mentioning of Hugs
(it is not helpful for new users anymore).
Changes the wording for the rest of the paragraph.
Fixes #18132.
- - - - -
55e35c0b by Baldur Blöndal at 2020-05-13T20:02:48-04:00
Predicate, Equivalence derive via `.. -> a -> All'
- - - - -
d7e0b57f by Alp Mestanogullari at 2020-05-13T20:03:30-04:00
hadrian: add a --freeze2 option to freeze stage 1 and 2
- - - - -
d880d6b2 by Artem Pelenitsyn at 2020-05-13T20:04:11-04:00
Don't reload environment files on every setSessionDynFlags
Makes `interpretPackageEnv` (which loads envirinment files) a part of
`parseDynamicFlags` (parsing command-line arguments, which is typically
done once) instead of `setSessionDynFlags` (which is typically called
several times). Making several (transitive) calls to `interpretPackageEnv`,
as before, caused #18125 #16318, which should be fixed now.
- - - - -
102cfd67 by Ryan Scott at 2020-05-13T20:04:46-04:00
Factor out HsPatSigType for pat sigs/RULE term sigs (#16762)
This implements chunks (2) and (3) of
https://gitlab.haskell.org/ghc/ghc/issues/16762#note_270170. Namely,
it introduces a dedicated `HsPatSigType` AST type, which represents
the types that can appear in pattern signatures and term-level `RULE`
binders. Previously, these were represented with `LHsSigWcType`.
Although `LHsSigWcType` is isomorphic to `HsPatSigType`, the intended
semantics of the two types are slightly different, as evidenced by
the fact that they have different code paths in the renamer and
typechecker.
See also the new `Note [Pattern signature binders and scoping]` in
`GHC.Hs.Types`.
- - - - -
b17574f7 by Hécate at 2020-05-13T20:05:28-04:00
fix(documentation): Fix the RST links to GHC.Prim
- - - - -
df021fb1 by Baldur Blöndal at 2020-05-13T20:06:06-04:00
Document (->) using inferred quantification for its runtime representations.
Fixes #18142.
- - - - -
1a93ea57 by Takenobu Tani at 2020-05-13T20:06:54-04:00
Tweak man page for ghc command
This commit updates the ghc command's man page as followings:
* Enable `man_show_urls` to show URL addresses in the `DESCRIPTION`
section of ghc.rst, because sphinx currently removes hyperlinks
for man pages.
* Add a `SEE ALSO` section to point to the GHC homepage
- - - - -
a951e1ba by Takenobu Tani at 2020-05-13T20:07:37-04:00
GHCi: Add link to the user's guide in help message
This commit adds a link to the user's guide in ghci's
`:help` message.
Newcomers could easily reach to details of ghci.
- - - - -
404581ea by Jeff Happily at 2020-05-13T20:08:15-04:00
Handle single unused import
- - - - -
1c999e5d by Ben Gamari at 2020-05-13T20:09:07-04:00
Ensure that printMinimalImports closes handle
Fixes #18166.
- - - - -
c9f5a8f4 by Ben Gamari at 2020-05-13T20:09:51-04:00
hadrian: Tell testsuite driver about LLVM availability
This reflects the logic present in the Make build system into Hadrian.
Fixes #18167.
- - - - -
c05c0659 by Simon Jakobi at 2020-05-14T03:31:21-04:00
Improve some folds over Uniq[D]FM
* Replace some non-deterministic lazy folds with
strict folds.
* Replace some O(n log n) folds in deterministic order
with O(n) non-deterministic folds.
* Replace some folds with set-operations on the underlying
IntMaps.
This reduces max residency when compiling
`nofib/spectral/simple/Main.hs` with -O0 by about 1%.
Maximum residency when compiling Cabal also seems reduced on the
order of 3-9%.
- - - - -
477f13bb by Simon Jakobi at 2020-05-14T03:31:58-04:00
Use Data.IntMap.disjoint
Data.IntMap gained a dedicated `disjoint` function in containers-0.6.2.1.
This patch applies this function where appropriate in hopes of modest
compiler performance improvements.
Closes #16806.
- - - - -
e9c0110c by Ben Gamari at 2020-05-14T12:25:53-04:00
IdInfo: Add reference to bitfield-packing ticket
- - - - -
9bd20e83 by Sebastian Graf at 2020-05-15T10:42:09-04:00
DmdAnal: Improve handling of precise exceptions
This patch does two things: Fix possible unsoundness in what was called
the "IO hack" and implement part 2.1 of the "fixing precise exceptions"
plan in
https://gitlab.haskell.org/ghc/ghc/wikis/fixing-precise-exceptions,
which, in combination with !2956, supersedes !3014 and !2525.
**IO hack**
The "IO hack" (which is a fallback to preserve precise exceptions
semantics and thus soundness, rather than some smart thing that
increases precision) is called `exprMayThrowPreciseException` now.
I came up with two testcases exemplifying possible unsoundness (if
twisted enough) in the old approach:
- `T13380d`: Demonstrating unsoundness of the "IO hack" when resorting
to manual state token threading and direct use of primops.
More details below.
- `T13380e`: Demonstrating unsoundness of the "IO hack" when we have
Nested CPR. Not currently relevant, as we don't have Nested
CPR yet.
- `T13380f`: Demonstrating unsoundness of the "IO hack" for safe FFI
calls.
Basically, the IO hack assumed that precise exceptions can only be
thrown from a case scrutinee of type `(# State# RealWorld, _ #)`. I
couldn't come up with a program using the `IO` abstraction that violates
this assumption. But it's easy to do so via manual state token threading
and direct use of primops, see `T13380d`. Also similar code might be
generated by Nested CPR in the (hopefully not too) distant future, see
`T13380e`. Hence, we now have a more careful test in `forcesRealWorld`
that passes `T13380{d,e}` (and will hopefully be robust to Nested CPR).
**Precise exceptions**
In #13380 and #17676 we saw that we didn't preserve precise exception
semantics in demand analysis. We fixed that with minimal changes in
!2956, but that was terribly unprincipled.
That unprincipledness resulted in a loss of precision, which is tracked
by these new test cases:
- `T13380b`: Regression in dead code elimination, because !2956 was too
syntactic about `raiseIO#`
- `T13380c`: No need to apply the "IO hack" when the IO action may not
throw a precise exception (and the existing IO hack doesn't
detect that)
Fixing both issues in !3014 turned out to be too complicated and had
the potential to regress in the future. Hence we decided to only fix
`T13380b` and augment the `Divergence` lattice with a new middle-layer
element, `ExnOrDiv`, which means either `Diverges` (, throws an
imprecise exception) or throws a *precise* exception.
See the wiki page on Step 2.1 for more implementational details:
https://gitlab.haskell.org/ghc/ghc/wikis/fixing-precise-exceptions#dead-code-elimination-for-raiseio-with-isdeadenddiv-introducing-exnordiv-step-21
- - - - -
568d7279 by Ben Gamari at 2020-05-15T10:42:46-04:00
GHC.Cmm.Opt: Handle MO_XX_Conv
This MachOp was introduced by 2c959a1894311e59cd2fd469c1967491c1e488f3
but a wildcard match in cmmMachOpFoldM hid the fact that it wasn't
handled. Ideally we would eliminate the match but this appears to be a
larger task.
Fixes #18141.
- - - - -
5bcf8606 by Ryan Scott at 2020-05-17T08:46:38-04:00
Remove duplicate Note [When to print foralls] in GHC.Core.TyCo.Ppr
There are two different Notes named `[When to print foralls]`. The
most up-to-date one is in `GHC.Iface.Type`, but there is a second
one in `GHC.Core.TyCo.Ppr`. The latter is less up-to-date, as it was
written before GHC switched over to using ifaces to pretty-print
types. I decided to just remove the latter and replace it with a
reference to the former.
[ci skip]
- - - - -
55f0e783 by Fumiaki Kinoshita at 2020-05-21T12:10:44-04:00
base: Add Generic instances to various datatypes under GHC.*
* GHC.Fingerprint.Types: Fingerprint
* GHC.RTS.Flags: GiveGCStats, GCFlags, ConcFlags, DebugFlags, CCFlags, DoHeapProfile, ProfFlags, DoTrace, TraceFlags, TickyFlags, ParFlags and RTSFlags
* GHC.Stats: RTSStats and GCStats
* GHC.ByteOrder: ByteOrder
* GHC.Unicode: GeneralCategory
* GHC.Stack.Types: SrcLoc
Metric Increase:
haddock.base
- - - - -
a9311cd5 by Gert-Jan Bottu at 2020-05-21T12:11:31-04:00
Explicit Specificity
Implementation for Ticket #16393.
Explicit specificity allows users to manually create inferred type variables,
by marking them with braces.
This way, the user determines which variables can be instantiated through
visible type application.
The additional syntax is included in the parser, allowing users to write
braces in type variable binders (type signatures, data constructors etc).
This information is passed along through the renamer and verified in the
type checker.
The AST for type variable binders, data constructors, pattern synonyms,
partial signatures and Template Haskell has been updated to include the
specificity of type variables.
Minor notes:
- Bumps haddock submodule
- Disables pattern match checking in GHC.Iface.Type with GHC 8.8
- - - - -
24e61aad by Ben Price at 2020-05-21T12:12:17-04:00
Lint should say when it is checking a rule
It is rather confusing that when lint finds an error in a rule attached
to a binder, it reports the error as in the RHS, not the rule:
...
In the RHS of foo
We add a clarifying line:
...
In the RHS of foo
In a rule attached to foo
The implication that the rule lives inside the RHS is a bit odd, but
this niggle is already present for unfoldings, whose pattern we are
following.
- - - - -
78c6523c by Ben Gamari at 2020-05-21T12:13:01-04:00
nonmoving: Optimise the write barrier
- - - - -
13f6c9d0 by Andreas Klebinger at 2020-05-21T12:13:45-04:00
Refactor linear reg alloc to remember past assignments.
When assigning registers we now first try registers we
assigned to in the past, instead of picking the "first"
one.
This is in extremely helpful when dealing with loops for
which variables are dead for part of the loop.
This is important for patterns like this:
foo = arg1
loop:
use(foo)
...
foo = getVal()
goto loop;
There we:
* assign foo to the register of arg1.
* use foo, it's dead after this use as it's overwritten after.
* do other things.
* look for a register to put foo in.
If we pick an arbitrary one it might differ from the register the
start of the loop expect's foo to be in.
To fix this we simply look for past register assignments for
the given variable. If we find one and the register is free we
use that register.
This reduces the need for fixup blocks which match the register
assignment between blocks. In the example above between the end
and the head of the loop.
This patch also moves branch weight estimation ahead of register
allocation and adds a flag to control it (cmm-static-pred).
* It means the linear allocator is more likely to assign the hotter
code paths first.
* If it assign these first we are:
+ Less likely to spill on the hot path.
+ Less likely to introduce fixup blocks on the hot path.
These two measure combined are surprisingly effective. Based on nofib
we get in the mean:
* -0.9% instructions executed
* -0.1% reads/writes
* -0.2% code size.
* -0.1% compiler allocations.
* -0.9% compile time.
* -0.8% runtime.
Most of the benefits are simply a result of removing redundant moves
and spills.
Reduced compiler allocations likely are the result of less code being
generated. (The added lookup is mostly non-allocating).
- - - - -
edc2cc58 by Andreas Klebinger at 2020-05-21T12:14:25-04:00
NCG: Codelayout: Distinguish conditional and other branches.
In #18053 we ended up with a suboptimal code layout because
the code layout algorithm didn't distinguish between conditional
and unconditional control flow.
We can completely eliminate unconditional control flow instructions
by placing blocks next to each other, not so much for conditionals.
In terms of implementation we simply give conditional branches less
weight before computing the layout.
Fixes #18053
- - - - -
b7a6b2f4 by Gleb Popov at 2020-05-21T12:15:26-04:00
gitlab-ci: Set locale to C.UTF-8.
- - - - -
a8c27cf6 by Stefan Holdermans at 2020-05-21T12:16:08-04:00
Allow spaces in GHCi :script file names
This patch updates the user interface of GHCi so that file names passed
to the ':script' command may contain spaces escaped with a backslash.
For example:
:script foo\ bar.script
The implementation uses a modified version of 'words' that does not
break on escaped spaces.
Fixes #18027.
- - - - -
82663959 by Stefan Holdermans at 2020-05-21T12:16:08-04:00
Add extra tests for GHCi :script syntax checks
The syntax for GHCi's ":script" command allows for only a single file
name to be passed as an argument. This patch adds a test for the cases
in which a file name is missing or multiple file names are passed.
Related to #T18027.
- - - - -
a0b79e1b by Stefan Holdermans at 2020-05-21T12:16:08-04:00
Allow GHCi :script file names in double quotes
This patch updates the user interface of GHCi so that file names passed
to the ':script' command can be wrapped in double quotes.
For example:
:script "foo bar.script"
The implementation uses a modified version of 'words' that treats
character sequences enclosed in double quotes as single words.
Fixes #18027.
- - - - -
cf566330 by Stefan Holdermans at 2020-05-21T12:16:08-04:00
Update documentation for GHCi :script
This patch adds the fixes that allow for file names containing spaces to
be passed to GHCi's ':script' command to the release notes for 8.12 and
expands the user-guide documentation for ':script' by mentioning how
such file names can be passed.
Related to #18027.
- - - - -
0004ccb8 by Tuan Le at 2020-05-21T12:16:46-04:00
llvmGen: Consider Relocatable read-only data as not constantReferences: #18137
- - - - -
964d3ea2 by John Ericson at 2020-05-21T12:17:30-04:00
Use `Checker` for `tc_pat`
- - - - -
b797aa42 by John Ericson at 2020-05-21T12:17:30-04:00
Use `Checker` for `tc_lpat` and `tc_lpats`
- - - - -
5108e84a by John Ericson at 2020-05-21T12:17:30-04:00
More judiciously panic in `ts_pat`
- - - - -
510e0451 by John Ericson at 2020-05-21T12:17:30-04:00
Put `PatEnv` first in `GHC.Tc.Gen.Pat.Checker`
- - - - -
cb4231db by John Ericson at 2020-05-21T12:17:30-04:00
Tiny cleaup eta-reduce away a function argument
In GHC, not in the code being compiled!
- - - - -
6890c38d by John Ericson at 2020-05-21T12:17:30-04:00
Use braces with do in `SplicePat` case for consistency
- - - - -
3451584f by buggymcbugfix at 2020-05-21T12:18:06-04:00
Fix spelling mistakes and typos
- - - - -
b552e531 by buggymcbugfix at 2020-05-21T12:18:06-04:00
Add INLINABLE pragmas to Enum list producers
The INLINABLE pragmas ensure that we export stable (unoptimised) unfoldings in
the interface file so we can do list fusion at usage sites.
Related tickets: #15185, #8763, #18178.
- - - - -
e7480063 by buggymcbugfix at 2020-05-21T12:18:06-04:00
Piggyback on Enum Word methods for Word64
If we are on a 64 bit platform, we can use the efficient Enum Word
methods for the Enum Word64 instance.
- - - - -
892b0c41 by buggymcbugfix at 2020-05-21T12:18:06-04:00
Document INLINE(ABLE) pragmas that enable fusion
- - - - -
2b363ebb by Richard Eisenberg at 2020-05-21T12:18:45-04:00
MR template should ask for key part
- - - - -
a95bbd0b by Sebastian Graf at 2020-05-21T12:19:37-04:00
Make `Int`'s `mod` and `rem` strict in their first arguments
They used to be strict until 4d2ac2d (9 years ago).
It's obviously better to be strict for performance reasons.
It also blocks #18067.
NoFib results:
```
--------------------------------------------------------------------------------
Program Allocs Instrs
--------------------------------------------------------------------------------
integer -1.1% +0.4%
wheel-sieve2 +21.2% +20.7%
--------------------------------------------------------------------------------
Min -1.1% -0.0%
Max +21.2% +20.7%
Geometric Mean +0.2% +0.2%
```
The regression in `wheel-sieve2` is due to reboxing that likely will go
away with the resolution of #18067. See !3282 for details.
Fixes #18187.
- - - - -
d3d055b8 by Galen Huntington at 2020-05-21T12:20:18-04:00
Clarify pitfalls of NegativeLiterals; see #18022.
- - - - -
1b508a9e by Alexey Kuleshevich at 2020-05-21T12:21:02-04:00
Fix wording in primops documentation to reflect the correct reasoning:
* Besides resizing functions, shrinking ones also mutate the
size of a mutable array and because of those two `sizeofMutabeByteArray`
and `sizeofSmallMutableArray` are now deprecated
* Change reference in documentation to the newer functions `getSizeof*`
instead of `sizeof*` for shrinking functions
* Fix incorrect mention of "byte" instead of "small"
- - - - -
4ca0c8a1 by Andreas Klebinger at 2020-05-21T12:21:53-04:00
Don't variable-length encode magic iface constant.
We changed to use variable length encodings for many types by default,
including Word32. This makes sense for numbers but not when Word32 is
meant to represent four bytes.
I added a FixedLengthEncoding newtype to Binary who's instances
interpret their argument as a collection of bytes instead of a number.
We then use this when writing/reading magic numbers to the iface file.
I also took the libery to remove the dummy iface field.
This fixes #18180.
- - - - -
a1275081 by Krzysztof Gogolewski at 2020-05-21T12:22:35-04:00
Add a regression test for #11506
The testcase works now.
See explanation in https://gitlab.haskell.org/ghc/ghc/issues/11506#note_273202
- - - - -
8a816e5f by Krzysztof Gogolewski at 2020-05-21T12:23:55-04:00
Sort deterministically metric output
Previously, we sorted according to the test name and way,
but the metrics (max_bytes_used/peak_megabytes_allocated etc.)
were appearing in nondeterministic order.
- - - - -
566cc73f by Sylvain Henry at 2020-05-21T12:24:45-04:00
Move isDynLinkName into GHC.Types.Name
It doesn't belong into GHC.Unit.State
- - - - -
d830bbc9 by Adam Sandberg Ericsson at 2020-05-23T13:36:20-04:00
docs: fix formatting and add some links
[skip ci]
- - - - -
49301ad6 by Andrew Martin at 2020-05-23T13:37:01-04:00
Implement cstringLength# and FinalPtr
This function and its accompanying rule resolve issue #5218.
A future PR to the bytestring library will make the internal
Data.ByteString.Internal.unsafePackAddress compute string length
with cstringLength#. This will improve the status quo because it is
eligible for constant folding.
Additionally, introduce a new data constructor to ForeignPtrContents
named FinalPtr. This additional data constructor, when used in the
IsString instance for ByteString, leads to more Core-to-Core
optimization opportunities, fewer runtime allocations, and smaller
binaries.
Also, this commit re-exports all the functions from GHC.CString
(including cstringLength#) in GHC.Exts. It also adds a new test
driver. This test driver is used to perform substring matches on Core
that is dumped after all the simplifier passes. In this commit, it is
used to check that constant folding of cstringLength# works.
- - - - -
dcd6bdcc by Ben Gamari at 2020-05-23T13:37:48-04:00
simplCore: Ignore ticks in rule templates
This fixes #17619, where a tick snuck in to the template of a rule,
resulting in a panic during rule matching. The tick in question was
introduced via post-inlining, as discussed in `Note [Simplifying
rules]`. The solution we decided upon was to simply ignore ticks in the
rule template, as discussed in `Note [Tick annotations in RULE
matching]`.
Fixes #18162.
Fixes #17619.
- - - - -
82cb8913 by John Ericson at 2020-05-23T13:38:32-04:00
Fix #18145 and also avoid needless work with implicit vars
- `forAllOrNothing` now is monadic, so we can trace whether we bind
an explicit `forall` or not.
- #18145 arose because the free vars calculation was needlessly
complex. It is now greatly simplified.
- Replaced some other implicit var code with `filterFreeVarsToBind`.
Co-authored-by: Ryan Scott <ryan.gl.scott at gmail.com>
- - - - -
a60dc835 by Ben Gamari at 2020-05-23T13:39:12-04:00
Bump process submodule
Fixes #17926.
- - - - -
856adf54 by Ben Gamari at 2020-05-23T13:40:21-04:00
users-guide: Clarify meaning of -haddock flag
Fixes #18206.
- - - - -
7ae57afd by Ben Gamari at 2020-05-23T13:41:03-04:00
git: Add ignored commits file
This can be used to tell git to ignore bulk renaming commits like the
recently-finished module hierarchy refactoring. Configured with,
git config blame.ignoreRevsFile .git-ignore-revs
- - - - -
63d30e60 by jneira at 2020-05-24T01:54:42-04:00
Add hie-bios script for windows systems
It is a direct translation of the sh script
- - - - -
59182b88 by jneira at 2020-05-24T01:54:42-04:00
Honour previous values for CABAL and CABFLAGS
The immediate goal is let the hie-bios.bat script
set CABFLAGS with `-v0` and remove all cabal output
except the compiler arguments
- - - - -
932dc54e by jneira at 2020-05-24T01:54:42-04:00
Add specific configuration for windows in hie.yaml
- - - - -
e0eda070 by jneira at 2020-05-24T01:54:42-04:00
Remove not needed hie-bios output
- - - - -
a0ea59d6 by Sylvain Henry at 2020-05-24T01:55:24-04:00
Move Config module into GHC.Settings
- - - - -
37430251 by Sylvain Henry at 2020-05-24T01:55:24-04:00
Rename GHC.Core.Arity into GHC.Core.Opt.Arity
- - - - -
a426abb9 by Sylvain Henry at 2020-05-24T01:55:24-04:00
Rename GHC.Hs.Types into GHC.Hs.Type
See discussion in https://gitlab.haskell.org/ghc/ghc/issues/13009#note_268610
- - - - -
1c91a7a0 by Sylvain Henry at 2020-05-24T01:55:24-04:00
Bump haddock submodule
- - - - -
66bd24d1 by Ryan Scott at 2020-05-24T01:56:03-04:00
Add orderingTyCon to wiredInTyCons (#18185)
`Ordering` needs to be wired in for use in the built-in `CmpNat` and
`CmpSymbol` type families, but somehow it was never added to the list
of `wiredInTyCons`, leading to the various oddities observed
in #18185. Easily fixed by moving `orderingTyCon` from
`basicKnownKeyNames` to `wiredInTyCons`.
Fixes #18185.
- - - - -
01c43634 by Matthew Pickering at 2020-05-24T01:56:42-04:00
Remove unused hs-boot file
- - - - -
7a07aa71 by Sylvain Henry at 2020-05-24T15:22:17-04:00
Hadrian: fix cross-compiler build (#16051)
- - - - -
15ccca16 by Sylvain Henry at 2020-05-24T15:22:17-04:00
Hadrian: fix distDir per stage
- - - - -
b420fb24 by Sylvain Henry at 2020-05-24T15:22:17-04:00
Hadrian: fix hp2ps error during cross-compilation
Fixed by @alp (see https://gitlab.haskell.org/ghc/ghc/issues/16051#note_274265)
- - - - -
cd339ef0 by Joshua Price at 2020-05-24T15:22:56-04:00
Make Unicode brackets opening/closing tokens (#18225)
The tokens `[|`, `|]`, `(|`, and `|)` are opening/closing tokens as
described in GHC Proposal #229. This commit makes the unicode
variants (`⟦`, `⟧`, `⦇`, and `⦈`) act the same as their ASCII
counterparts.
- - - - -
013d7120 by Ben Gamari at 2020-05-25T09:48:17-04:00
Revert "Specify kind variables for inferred kinds in base."
As noted in !3132, this has rather severe knock-on consequences in
user-code. We'll need to revisit this before merging something along
these lines.
This reverts commit 9749fe1223d182b1f8e7e4f7378df661c509f396.
- - - - -
4c4312ed by Ben Gamari at 2020-05-25T09:48:53-04:00
Coverage: Drop redundant ad-hoc boot module check
To determine whether the module is a boot module
Coverage.addTicksToBinds was checking for a `boot` suffix in the module
source filename. This is quite ad-hoc and shouldn't be necessary; the
callsite in `deSugar` already checks that the module isn't a boot
module.
- - - - -
1abf3c84 by Ben Gamari at 2020-05-25T09:48:53-04:00
Coverage: Make tickBoxCount strict
This could otherwise easily cause a leak of (+) thunks.
- - - - -
b2813750 by Ben Gamari at 2020-05-25T09:48:53-04:00
Coverage: Make ccIndices strict
This just seems like a good idea.
- - - - -
02e278eb by Ben Gamari at 2020-05-25T09:48:53-04:00
Coverage: Don't produce ModBreaks if not HscInterpreted
emptyModBreaks contains a bottom and consequently it's important that we
don't use it unless necessary.
- - - - -
b8c014ce by Ben Gamari at 2020-05-25T09:48:53-04:00
Coverage: Factor out addMixEntry
- - - - -
733e82c0 by Ben Gamari at 2020-05-26T03:49:04+00:00
rts: Post ticky entry counts to the eventlog
We currently only post the entry counters, not the other global
counters as in my experience the former are more useful. We use the heap
profiler's census period to decide when to dump.
- - - - -
30 changed files:
- + .git-ignore-revs
- .gitlab-ci.yml
- .gitlab/ci.sh
- .gitlab/merge_request_templates/merge-request.md
- compiler/GHC.hs
- compiler/prelude/PrelNames.hs → compiler/GHC/Builtin/Names.hs
- compiler/prelude/THNames.hs → compiler/GHC/Builtin/Names/TH.hs
- compiler/prelude/PrimOp.hs → compiler/GHC/Builtin/PrimOps.hs
- + compiler/GHC/Builtin/PrimOps.hs-boot
- compiler/prelude/TysWiredIn.hs → compiler/GHC/Builtin/Types.hs
- compiler/prelude/TysWiredIn.hs-boot → compiler/GHC/Builtin/Types.hs-boot
- compiler/typecheck/TcTypeNats.hs → compiler/GHC/Builtin/Types/Literals.hs
- compiler/prelude/TysPrim.hs → compiler/GHC/Builtin/Types/Prim.hs
- compiler/prelude/KnownUniques.hs → compiler/GHC/Builtin/Uniques.hs
- compiler/prelude/KnownUniques.hs-boot → compiler/GHC/Builtin/Uniques.hs-boot
- compiler/prelude/PrelInfo.hs → compiler/GHC/Builtin/Utils.hs
- compiler/prelude/primops.txt.pp → compiler/GHC/Builtin/primops.txt.pp
- compiler/GHC/ByteCode/Asm.hs
- compiler/GHC/ByteCode/InfoTable.hs
- compiler/GHC/ByteCode/Instr.hs
- compiler/GHC/ByteCode/Linker.hs
- compiler/GHC/ByteCode/Types.hs
- compiler/GHC/Cmm.hs
- compiler/GHC/Cmm/BlockId.hs
- compiler/GHC/Cmm/CLabel.hs
- compiler/GHC/Cmm/CallConv.hs
- compiler/GHC/Cmm/CommonBlockElim.hs
- compiler/GHC/Cmm/ContFlowOpt.hs
- compiler/GHC/Cmm/Dataflow.hs
- compiler/GHC/Cmm/Dataflow/Block.hs
The diff was not included because it is too large.
View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/8280f0d885d68bfc4468e4e127e978c96d1bfad1...733e82c0528fe2a60a10369a80ad5fc5e5cdc1ae
--
View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/8280f0d885d68bfc4468e4e127e978c96d1bfad1...733e82c0528fe2a60a10369a80ad5fc5e5cdc1ae
You're receiving this email because of your account on gitlab.haskell.org.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.haskell.org/pipermail/ghc-commits/attachments/20200525/05afefca/attachment-0001.html>
More information about the ghc-commits
mailing list