[xmonad] darcs patch: X.L.MouseResizableTile: keep draggers on the bottom of...

Jan Vornberger Jan.Vornberger at Informatik.Uni-Oldenburg.DE
Wed Dec 23 10:04:43 EST 2009


On Thu, Nov 26, 2009 at 06:38:02PM +0100, Tomas Janousek wrote:
> Hello,
> 
> skimming through byorgey's bug swipe, I noticed that #207 applies to
> MouseResizableTile as well.
> 
> Thu Nov 26 18:34:13 CET 2009  Tomas Janousek <tomi at nomi.cz>
>   * X.L.MouseResizableTile: keep draggers on the bottom of the window stack.

As was discussed on IRC, this patch turns out to break MRT when used in
combination with a desktop environment, because it will lower the
draggers to the very bottom of the stack, hidding them behind things
like Gnome's Desktop for example.

I'm applying the attached patch instead, which lets the core know about
the draggers so they can be restacked correctly. This should also solve
the original problem (draggers being on top of floating windows), without
this un-intended side effect.

Note: As a similar fix was applied to DragPane, that layout might also
not work correctly anymore in combination with a desktop environment.
I haven't looked into it much so far.

Regards,

Jan
-------------- next part --------------
Wed Dec 23 15:54:28 CET 2009  Jan Vornberger <jan.vornberger at informatik.uni-oldenburg.de>
  * Let the core know about MouseResizableTile's draggers, so they are stacked correctly

New patches:

[Let the core know about MouseResizableTile's draggers, so they are stacked correctly
Jan Vornberger <jan.vornberger at informatik.uni-oldenburg.de>**20091223145428
 Ignore-this: 7c096aba6b540ccf9b49c4ee86c6091a
] {
hunk ./XMonad/Layout/MouseResizableTile.hs 1
-{-# LANGUAGE DeriveDataTypeable, FlexibleInstances, MultiParamTypeClasses, PatternGuards #-}
+{-# LANGUAGE DeriveDataTypeable, FlexibleInstances, MultiParamTypeClasses, PatternGuards, TypeSynonymInstances #-}
 ----------------------------------------------------------------------------
 -- |
 -- Module      :  XMonad.Layout.MouseResizableTile
hunk ./XMonad/Layout/MouseResizableTile.hs 28
 import XMonad hiding (tile, splitVertically, splitHorizontallyBy)
 import qualified XMonad.StackSet as W
 import XMonad.Util.XUtils
+import Control.Applicative((<$>))
 
 -- $usage
 -- You can use this module with the following in your @~\/.xmonad\/xmonad.hs@:
hunk ./XMonad/Layout/MouseResizableTile.hs 104
 mouseResizableTileMirrored :: MouseResizableTile a
 mouseResizableTileMirrored= MRT 1 mrtFraction [] [] [] 0 0 True
 
-instance LayoutClass MouseResizableTile a where
+instance LayoutClass MouseResizableTile Window where
     doLayout state sr (W.Stack w l r) =
         let wins = reverse l ++ w : r
             num = length wins
hunk ./XMonad/Layout/MouseResizableTile.hs 115
             rects' = map (mirrorAdjust id mirrorRect . sanitizeRectangle sr') rects
         in do
             mapM_ deleteDragger $ draggers state
-            newDraggers <- mapM (createDragger sr . adjustForMirror (isMirrored state)) preparedDraggers
-            return (zip wins rects', Just $ state { draggers = newDraggers,
-                                                    focusPos = length l,
-                                                    numWindows = length wins })
+            (draggerWrs, newDraggers) <- unzip <$> mapM
+                                            (createDragger sr . adjustForMirror (isMirrored state))
+                                            preparedDraggers
+            return (zip wins rects' ++ draggerWrs, Just $ state { draggers = newDraggers,
+                                                                  focusPos = length l,
+                                                                  numWindows = length wins })
         where
             mirrorAdjust a b = if (isMirrored state)
                                 then b
hunk ./XMonad/Layout/MouseResizableTile.hs 233
         draggerRect = Rectangle (sx + fromIntegral leftw - mrtDraggerOffset) sy mrtDraggerSize sh
         draggerInfo = MasterDragger sx (fromIntegral sw)
 
-createDragger :: Rectangle -> DraggerWithRect -> X DraggerWithWin
+createDragger :: Rectangle -> DraggerWithRect -> X ((Window, Rectangle), DraggerWithWin)
 createDragger sr (draggerRect, draggerCursor, draggerInfo) = do
hunk ./XMonad/Layout/MouseResizableTile.hs 235
-        draggerWin <- createInputWindow draggerCursor $ sanitizeRectangle sr draggerRect
-        io . flip lowerWindow draggerWin =<< asks display
-        return (draggerWin, draggerInfo)
+        let draggerRect' = sanitizeRectangle sr draggerRect
+        draggerWin <- createInputWindow draggerCursor draggerRect'
+        return ((draggerWin, draggerRect'), (draggerWin, draggerInfo))
 
 deleteDragger :: DraggerWithWin -> X ()
 deleteDragger (draggerWin, _) = deleteWindow draggerWin
}

Context:

[Actions/Search: added openstreetmap
intrigeri at boum.org**20091222114545
 Ignore-this: fafc4680c8b59b7a044d995c1dacec9a
] 
[Add a search predicate option to XMonad.Prompt
Mike Lundy <mike at fluffypenguin.org>**20091221025408
 Ignore-this: 8e8804eeb9650d38bc225e15887310da
] 
[In D.Extending note how <+> can be used with keybindings.
Adam Vogt <vogt.adam at gmail.com>**20091220190739
 Ignore-this: ebea8ef8a835ed368fa06621add6519f
] 
[Fix MultiToggle crashes with decorated layouts
Tomas Janousek <tomi at nomi.cz>**20091220004733
 Ignore-this: 9208f5da9f0de95464ea62cb45e8f291
 
 The problem was that certain layouts keep their "world" state in their value,
 which was thrown away and forgotten after ReleaseResources during toggle.
 
 In particular, decorated layouts store some X11 handles in them and
 allocate/deallocate it as appropriate. If any modification to their state is
 ignored, they may try to deallocate already deallocated memory, which results
 in a crash somewhere inside Xlib.
 
 This patch makes Transformers reversible so that nothing is ever ignored. As a
 side effect, layout transformers now do receive messages and messages for the
 base layout do not need the undo/reapply cycle -- we just pass messages to the
 current transformed layout and unapply the transformer when needed.
 (This, however, doesn't mean that the base layout is not asked to release
 resources on a transformer change -- we still need the transformer to release
 its resources and there's no way to do this without asking the base layout as
 well.)
] 
[Golf / style change in U.ExtensibleState
Adam Vogt <vogt.adam at gmail.com>**20091208010506
 Ignore-this: c35bd85baae4700e14417ac7e07de959
] 
[Style changes in EwmhDesktops
Adam Vogt <vogt.adam at gmail.com>**20091219003824
 Ignore-this: 905eff9ed951955c8f62617b2d82302e
] 
[Add support for fullscreen through the _NET_WM_STATE protocol
audunskaugen at gmail.com**20091214135119
 Ignore-this: 430ca3c6779e36383f8ce8e477ee9622
 
 This patch adds support for applications using the
 gtk_window_fullscreen function, and other applications using
 _NET_WM_STATE for the same purpose.
] 
[TAG 0.9.1
Spencer Janssen <spencerjanssen at gmail.com>**20091216233651
 Ignore-this: 713d9dd89d775e30346f57a61038d308
] 
[Bump version to 0.9.1
Spencer Janssen <spencerjanssen at gmail.com>**20091216232634
 Ignore-this: bcd799c3341ee6c69a259e1dca747cac
] 
[Match X11 dependencies with xmonad's
Spencer Janssen <spencerjanssen at gmail.com>**20091216012630
 Ignore-this: bcbd6e3e5e2675cdac6f1d1b1bc09853
] 
[Safer X11 version dependency
Spencer Janssen <spencerjanssen at gmail.com>**20091216005916
 Ignore-this: 6dc805a8a0c7a3d3369bc1d6d97d4f56
] 
[Update Prompt for numlockMask changes
Spencer Janssen <spencerjanssen at gmail.com>**20091103222621
 Ignore-this: 4980e2fdf4c296a266590cc4acf76e1e
] 
[X.L.MouseResizableTile: change description for mirrored variant
Tomas Janousek <tomi at nomi.cz>**20091211124218
 Ignore-this: dbc02fb777e35cdc15fb11979c1e983e
 
 The description for mirrored MouseResizableTile is now "Mirror
 MouseResizableTile", to follow the standard of other layouts that can be
 mirrored using the Mirror modifier.
] 
[X.A.GridSelect: documentation typo fix
Tomas Janousek <tomi at nomi.cz>**20091211182515
 Ignore-this: 521bef2a73a9e969d7a96defb555177b
 
 spotted by Justin on IRC
] 
[A.GridSelect shouldn't grab keys if there are no choices.
Adam Vogt <vogt.adam at gmail.com>**20091210183038
 Ignore-this: 48509f780120014a10b32e7289369f32
 
 Thanks thermal2008 in #xmonad for bringing up the corner case when gridselect
 is run with an empty list of choices.
] 
[onScreen' variation for X () functions
Nils Schweinsberg <mail at n-sch.de>**20091209003717
 Ignore-this: 6a9644c729c2b60f94398260f3640e4d
] 
[Make X.L.Minimize explicitly mark minimized windows as boring
Jan Vornberger <jan.vornberger at informatik.uni-oldenburg.de>**20091222214529
 Ignore-this: b1e8adf26ac87dede6c1b7a7d687411c
] 
[Added Bluetile's config
Jan Vornberger <jan.vornberger at informatik.uni-oldenburg.de>**20091209150309
 Ignore-this: 641ae527ca6f615e81822b6f38f827e7
] 
[BluetileCommands - a list of commands that Bluetile uses to communicate with its dock
Jan Vornberger <jan.vornberger at informatik.uni-oldenburg.de>**20091208234431
 Ignore-this: 1a5a5e69c7c37d3ffe8d8e09496568de
] 
[Use lookup instead of find in A.PerWorkspaceKeys
Adam Vogt <vogt.adam at gmail.com>**20091129032650
 Ignore-this: 7ecb043df4317365ff3d25b17303eed8
] 
[Change of X.A.OnScreen, more simple and predictable behaviour of onScreen, new functions: toggle(Greedy)OnScreen
Nils Schweinsberg <mail at n-sch.de>**20091207155050
 Ignore-this: c375250778758e401217bcad83567d3b
] 
[Module to ensure that a dragged window always stays in front of all other windows
Jan Vornberger <jan.vornberger at informatik.uni-oldenburg.de>**20091129004506
 Ignore-this: a8a389198ccc28a66686561d4d17e91b
] 
[Decoration that allows to switch the position of windows by dragging them onto each other.
Jan Vornberger <jan.vornberger at informatik.uni-oldenburg.de>**20091129003431
 Ignore-this: 38aff0f3beb1a1eb304219c4f3e85593
] 
[A decoration with small buttons and a supporting module
Jan Vornberger <jan.vornberger at informatik.uni-oldenburg.de>**20091129002416
 Ignore-this: 2d65133bc5b9ad29bad7d06780bdaa4
] 
[XMonad.Actions.Search: finally fixed the internet archive search plugin
gwern0 at gmail.com**20091205033435
 Ignore-this: c78ecebced9bc8e39e6077ffa9f9f182
] 
[XMonad.Actions.Search: in retrospect, a bit silly to make everyone go through SSL
gwern0 at gmail.com**20091205033318
 Ignore-this: 452b4e6efb83935fc1063ab695ae074d
] 
[Prompt.hs: Corrected quit keybindings
Tim Horton <tmhorton at gmail.com>**20091203050041
 Ignore-this: e8cd2cd1d41f6807f68157ef37c631ea
] 
[Extended decoration module with more hooks and consolidated some existing ones
Jan Vornberger <jan.vornberger at informatik.uni-oldenburg.de>**20091128234310
 Ignore-this: 5a23af3009ecca2feb9a84f8c6f8ac33
] 
[Extended decoration theme to contain extra static text that always appears in the title bar
Jan Vornberger <jan.vornberger at informatik.uni-oldenburg.de>**20091024213928
 Ignore-this: 95f46d6b9ff716a2d8002a426c1012c8
] 
[Extended paintAndWrite to allow for multiple strings to be written into the rectangle
Jan Vornberger <jan.vornberger at informatik.uni-oldenburg.de>**20091024205111
 Ignore-this: eb7d32284b7f98145038dcaa14f8075e
] 
[Added the alignment option 'AlignRightOffset'
Jan Vornberger <jan.vornberger at informatik.uni-oldenburg.de>**20091024204513
 Ignore-this: 58cc00e1be669877e38a97e36b924969
] 
[Prevent windows from being decorated that are too small to contain decoration.
Jan Vornberger <jan.vornberger at informatik.uni-oldenburg.de>**20090627094316
 Ignore-this: 39b806462bbd424f1206b635e9d506e1
] 
[X.L.MouseResizableTile: keep draggers on the bottom of the window stack.
Tomas Janousek <tomi at nomi.cz>**20091126173413
 Ignore-this: 8089cf8ce53580090b045f4aebb1b899
] 
[Implemented smarter system of managing borders for BorderResize
Jan Vornberger <jan.vornberger at informatik.uni-oldenburg.de>**20091122233651
 Ignore-this: 4775c082249e598a84c79b2e819f28b0
] 
[X.H.DynamicLog: fix xmonadPropLog double-encoding of UTF-8
Tomas Janousek <tomi at nomi.cz>**20091121004829
 Ignore-this: bde612bbd1a19951f9718a03e737c4ac
 
 dynamicLogString utf-8 encodes its output, xmonadPropLog shouldn't do that
 again.
] 
[X.H.DynamicLog: make documentation for 'dzen' and 'xmobar' slightly more clear
Brent Yorgey <byorgey at cis.upenn.edu>**20091121170739
 Ignore-this: c9a241677fda21ef93305fc3882f102e
] 
[X.H.ManageDocks: ignore struts that cover an entire screen on that screen
Tomas Janousek <tomi at nomi.cz>**20091119145043
 Ignore-this: ad7bbf10c49c9f3e938cdc3d8588e202
 
 Imagine a screen layout like this:
 
   11111111
   11111111
   11111111
    222222    <--- xmobar here
    222222
    222222
 
 When placing xmobar as indicated, the partial strut property indicates that an
 entire height of screen 1 is covered by the strut, as well as a few lines at
 the top of screen 2. The original code would create a screen rectangle of
 negative height and wreak havoc. This patch causes such strut to be ignored on
 the screen it covers entirely, resulting in the desired behaviour of a small
 strut at the top of screen 2.
 
 Please note that this semantics of _NET_WM_STRUT and _NET_WM_STRUT_PARTIAL is
 different to what is in wm-spec. The "correct" thing to do would be to discard
 the covered portion of screen 1 leaving two narrow areas at the sides, but
 this new behaviour is probably more desirable in many cases, at least for
 xmonad/xmobar users.
 
 The correct solution of having separate _NET_WM_STRUT_PARTIAL for each
 Xinerama screen was mentioned in wm-spec maillist in 2007, but has never
 really been proposed, discussed and included in wm-spec. Hence this "hack".
] 
[Use imported 'fi' in PositionStoreHooks
Adam Vogt <vogt.adam at gmail.com>**20091119103112
 Ignore-this: 6563a3093083667c79aa491a6f59b805
] 
[Changed interface of X.U.ExtensibleState
Daniel Schoepe <daniel.schoepe at gmail.com>**20091116171013
 Ignore-this: 9a830f9341e461628974890bab0bd65b
 
 Changed the interface of X.U.ExtensibleState to resemble that of
 Control.Monad.State and modified the modules that use it accordingly.
] 
[PositionStoreFloat - a floating layout with support hooks
Jan Vornberger <jan.vornberger at informatik.uni-oldenburg.de>**20091115184833
 Ignore-this: 8b1d0fcef1465356d72cb5f1f32413b6
] 
[PositionStore utility to store information about position and size of a window
Jan Vornberger <jan.vornberger at informatik.uni-oldenburg.de>**20091108195735
 Ignore-this: 2f6e68a490deb75cba5d007b30c93fb2
] 
[X.H.Urgencyhook fix minor doc bug
Anders Engstrom <ankaan at gmail.com>**20091115131121
 Ignore-this: 18b63bccedceb66c77b345a9300f1ac3
] 
[X.H.DynamicLog fix minor indentation oddness
Anders Engstrom <ankaan at gmail.com>**20091115130707
 Ignore-this: 7f2c49eae5527874ca4499767f4167c4
] 
[X.A.CycleWS cycle by tag group
Anders Engstrom <ankaan at gmail.com>**20091115130217
 Ignore-this: 909da8c00b47a31d04f59bd3751c60bc
 Allow grouping of workspaces, so that a user can cycle through those in the same group. Grouping is done by using a special character in the tag.
] 
[Use less short names in X.Prompt
Adam Vogt <vogt.adam at gmail.com>**20091115025647
 Ignore-this: 1d27b8efc4d829a5642717c6f6426336
] 
[Use io instead of liftIO in Prompt
Adam Vogt <vogt.adam at gmail.com>**20091115025301
 Ignore-this: cd4031b74cd5bb874cd2c3cc2cb087f2
] 
['io' and 'fi' are defined outside of Prompt
Adam Vogt <vogt.adam at gmail.com>**20091115024001
 Ignore-this: 3426056362db9cbfde7d2f4edbfe6f36
] 
[Use zipWithM_ instead of recursion in Prompt.printComplList
Adam Vogt <vogt.adam at gmail.com>**20091115023451
 Ignore-this: 2457500ed871ef120653a3d4ada13441
] 
[Minor style changes in DynamicWorkspaces
Adam Vogt <vogt.adam at gmail.com>**20091115022751
 Ignore-this: 1a6018ab134e4420a949354575a8a110
] 
[X.A.DynamicWorkspaces fix doc and add behaviour
Anders Engstrom <ankaan at gmail.com>**20091113233903
 Ignore-this: ab7c20a9c1b43ebc6a7f4700d988fb73
 Before this patch the documentation claims that it won't do anything on non-empty workspaces when it actually does. This patch fixes the documentation to reflect the actual behaviour, but also adds the behaviour promised by the documentation in other functions. It does not break configs. In addition it also provides functions to help removing empty workspaces when leaving them.
] 
[rework XMonad.Util.Dzen
daniel at wagner-home.com**20091114051509
 Ignore-this: 16d93f91c54f7d195b1a418e6c0351c5
] 
[generalize IO actions to MonadIO m => m actions
daniel at wagner-home.com**20091114023616
 Ignore-this: 2c801a27b0ffee34a2f0daca3778613a
 
 This should not cause any working configs to stop working, because IO is an instance of MonadIO, and because complete configs will pin down the type of the call to IO.  Note that XMonad.Config.Arossato is not a complete config, and so it needed some tweaks; with a main function, this should not be a problem.
] 
[fix documentation to match implementation
daniel at wagner-home.com**20091114021328
 Ignore-this: 6dbbb118b139f443c40a573445a48d07
] 
[Bypass more of stringToKeysym in U.Paste
Adam Vogt <vogt.adam at gmail.com>**20091114223726
 Ignore-this: 617c922647e9f49f5ecefa0eb1c65d3c
] 
[Don't erase floating information with H.InsertPosition (Issue 334)
Adam Vogt <vogt.adam at gmail.com>**20091113161402
 Ignore-this: de1c03eb860ea25b390ee5c756b02997
] 
[Rename gridselectViewWorkspace to gridselectWorkspace, add another example.
Adam Vogt <vogt.adam at gmail.com>**20091112211435
 Ignore-this: 462cf1c7f66ab97a1ce642977591a910
 
 The name should be more general to suggest uses other than just viewing other
 workspaces.
] 
[X.A.DynamicWorkspaces: fix addWorkspace and friends so they never add another copy of an existing workspace
Brent Yorgey <byorgey at cis.upenn.edu>**20091112201351
 Ignore-this: 5bfe8129707b038ed04383b7566b2323
] 
[Trim whitespace in H.FloatNext
Adam Vogt <vogt.adam at gmail.com>**20091111022702
 Ignore-this: 1ad52678246fa1ac951169c2356ce10b
] 
[Use ExtensibleState in H.FloatNext
Adam Vogt <vogt.adam at gmail.com>**20091111022513
 Ignore-this: 760d95a685af080466cb4164d1096423
] 
[Make a haddock link direct in C.Desktop.
Adam Vogt <vogt.adam at gmail.com>**20091111013810
 Ignore-this: da724a7974c3de60f49996c1fe92d3fb
] 
[Change A.TopicSpace haddocks to use block quotes.
Adam Vogt <vogt.adam at gmail.com>**20091111013241
 Ignore-this: 6f7f43d2715cfde62b9c05c7d9a0da2
] 
[Add defaultTopicConfig, to allow adding more fields to TopicSpace later.
Adam Vogt <vogt.adam at gmail.com>**20091111012915
 Ignore-this: 6dad95769651a9a1ef8d771f81c91f8e
] 
[X.A.WindowGo: fix haddock markup
Spencer Janssen <spencerjanssen at gmail.com>**20091111003256
 Ignore-this: c6a06de900ca8b67498abf5152e3d9ea
] 
[Minor style corrections in X.U.SpawnOnce
Daniel Schoepe <daniel.schoepe at gmail.com>**20091109201543
 Ignore-this: 1264852c23b4f84b2580bf4567529c68
] 
[Add gridselectViewWorkspace in X.A.GridSelect
Daniel Schoepe <daniel.schoepe at gmail.com>**20091109155815
 Ignore-this: 5543211e9e3fd325cb798b004635a525
] 
[minor-doc-fix-in-ManageHelpers
`Henrique Abreu <hgabreu at gmail.com>'**20091104172727
 Ignore-this: 231ad417541bc3c17a1cb2dff139d55d
] 
[Set buffering to LineBuffering in scripts/xmonadpropread.hs
Daniel Schoepe <daniel.schoepe at gmail.com>**20091108204106
 Ignore-this: 4e593fc1461fbbfb5b147c7c7702584e
 
 (Required for the script to work properly with tools like dzen)
] 
[X.U.ExtensibleState: style
Spencer Janssen <spencerjanssen at gmail.com>**20091108182858
 Ignore-this: f189da75ad2c57ae9cca48eaf69a6bad
] 
[X.A.DynamicWorkspaces: new 'addWorkspacePrompt' method
Brent Yorgey <byorgey at cis.upenn.edu>**20091108170503
 Ignore-this: a3992b1b7938be80d8fd2a5a503a4042
] 
[Remove defaulting when using NoMonomorphismRestriction in H.EwmhDesktops
Adam Vogt <vogt.adam at gmail.com>**20091107195255
 Ignore-this: ca3939842639c94ca4fd1ff6624319c1
] 
[Update A.TopicSpace to use extensible state. No config changes required.
Adam Vogt <vogt.adam at gmail.com>**20091107194502
 Ignore-this: 7a82aad512bb727b3447de0faa4a210f
] 
[Inline tupadd function in A.GridSelect
Adam Vogt <vogt.adam at gmail.com>**20091101190312
 Ignore-this: 458968154303ab865c304f387d6ac83b
] 
[Alphabetize exposed-modules
Spencer Janssen <spencerjanssen at gmail.com>**20091107174946
 Ignore-this: 919684aea7747a756b303f9b34a2870b
] 
[Use X.U.SpawnOnce in my config
Spencer Janssen <spencerjanssen at gmail.com>**20091107174615
 Ignore-this: fe8f5f75136128280942771ec429f09a
] 
[Add XMonad.Util.SpawnOnce
Spencer Janssen <spencerjanssen at gmail.com>**20091107173820
 Ignore-this: 8d4657bbaa8dbeb1d0f9d22293bfef19
] 
[Store deserialized data after reading in X.U.ExtensibleState
Daniel Schoepe <daniel.schoepe at gmail.com>**20091107103832
 Ignore-this: 192beca56e9437292bd3f16451ae9e66
] 
[Fixed conflict between X.U.ExtensibleState and X.C.Sjanssen
Daniel Schoepe <daniel.schoepe at gmail.com>**20091107103619
 Ignore-this: 80f4bb218574d7c528af17473c6e4f66
] 
[Use X.U.ExtensibleState instead of IORefs
Daniel Schoepe <daniel.schoepe at gmail.com>**20091106115601
 Ignore-this: e0e80e31e51dfe76f2b2ed597892cbba
   
 This patch changes SpawnOn, DynamicHooks and UrgencyHooks to
 use X.U.ExtensibleState instead of IORefs. This simplifies the
 usage of those modules thus also breaking current configs.
] 
[Add X.U.ExtensibleState
Daniel Schoepe <daniel.schoepe at gmail.com>**20091106115336
 Ignore-this: d80d9d0c10a53fb71a375e432bd29344
] 
[My config uses xmonadPropLog now
Spencer Janssen <spencerjanssen at gmail.com>**20091107005230
 Ignore-this: 8f16b8bea86dfcd3739f1566f5897578
] 
[Add xmonadpropread script
Spencer Janssen <spencerjanssen at gmail.com>**20091107004858
 Ignore-this: 8cc7ed36ec1126d0139638148f9642e8
] 
[Add experimental xmonadPropLog function
Spencer Janssen <spencerjanssen at gmail.com>**20091107004624
 Ignore-this: f09b2c11b16a3af993b63d1b39566120
] 
[XMonad.Actions.Search: imdb search URL tweak for bug #33
gwern0 at gmail.com**20091103222330
 Ignore-this: bae5e6d3ec6c4b6591016ece9dffb202
] 
[Clean imports for L.BoringWindows
Adam Vogt <vogt.adam at gmail.com>**20091103140649
 Ignore-this: 56946a652329390dbdd63746ca23ee8e
] 
[I maintain L.BoringWindows
Adam Vogt <vogt.adam at gmail.com>**20091103140509
 Ignore-this: de853972b4c1c4cefa2dc29e68828d5d
] 
[fix window rectangle calculation in X.A.UpdatePointer
Tomas Janousek <tomi at nomi.cz>**20091026154918
 Ignore-this: ad0c3a020b802854919c7827faa001ad
] 
[Implement hasProperty in terms of runQuery in U.WindowProperties
Adam Vogt <vogt.adam at gmail.com>**20091031154945
 Ignore-this: 1c351bc436e0e323dc25d8f5ff734dcb
 
 This addresses issue 302 for unicode titles by actually using the complicated
 XMonad.ManageHook.title code, instead of reimplementing it with stringProperty
 (which doesn't appear to handle unicode).
] 
[Add functions to access the current input in X.Prompt
Daniel Schoepe <daniel.schoepe at gmail.com>**20091030235033
 Ignore-this: 3f568c1266d85dcaa5722b19bbbd61dd
] 
[Remove putSelection, fixes #317
Spencer Janssen <spencerjanssen at gmail.com>**20091030224354
 Ignore-this: 6cfd6d92e1d133bc9e3cbb7c8339f735
] 
[Fix typo in H.FadeInactive documentation
Adam Vogt <vogt.adam at gmail.com>**20091029165736
 Ignore-this: b2af487cd382416160d5540b7f210464
] 
[X.L.MultiCol constructor 0 NWin bugfig
Anders Engstrom <ankaan at gmail.com>**20091029105633
 Ignore-this: e6a24f581593424461a8675984d14d25
 Fix bug where the constructor did not accept catch-all columns. Also some minor cleaning.
] 
[X.H.ManageHelpers: added currentWs that returns the current workspace
Ismael Carnales <icarnales at gmail.com>**20091028193519
 Ignore-this: dcd3dac6bd741d26747807691f125637
] 
[X.L.MultiColumns bugfix and formating
Anders Engstrom <ankaan at gmail.com>**20091027131741
 Ignore-this: 6978f485d18adb8bf81cf6c8e0d0332
 Fix bug where a column list of insufficient length could be used to find the column of the window. Also fix formating to conform better with standards.
] 
[X.L.MultiColumns NWin shrinkning fix
Anders Engstrom <ankaan at gmail.com>**20091027005932
 Ignore-this: 9ba40ee14ec12c3885173817eac2b564
 Fixed a bug where the list containing the number of windows in each column was allowed the shrink if a column was unused.
] 
[New Layout X.L.MultiColumns
Anders Engstrom <ankaan at gmail.com>**20091024175155
 Ignore-this: a2d3d2eee52c28eab7d125f6b621cada
 New layout inspired the realization that I was switching between Mirror Tall and Mirror ThreeCol depending on how many windows there were on the workspace. This layout will make those changes automatically.
] 
[Changing behaviour of ppUrgent with X.H.DynamicLog
mail at n-sch.de**20090910010411
 Ignore-this: 3882f36d5c49e53628485c1570bf136a
 
 Currently, the ppUrgent method is an addition to the ppHidden method.
 This doesn't make any sense since it is in fact possible to get urgent
 windows on the current and visible screens. So I've raised the ppUrgent
 printer to be above ppCurrent/ppVisible and dropped its dependency on
 ppHidden.
 
 In addition to that this makes it a lot more easier to define a more
 custom ppUrgent printer, since you don't have to "undo" the ppHidden
 printer anymore. This also basicly removes the need for dzenStrip,
 although I just changed the description.
 
 -- McManiaC / Nils
 
] 
[fix X.U.Run.spawnPipe fd leak
Tomas Janousek <tomi at nomi.cz>**20091025210246
 Ignore-this: 24375912d505963fafc917a63d0e79a0
] 
[TAG 0.9
Spencer Janssen <spencerjanssen at gmail.com>**20091026013449
 Ignore-this: 542b6105d6deed65e12d1f91c666b0b2
] 
Patch bundle hash:
50fa601c02a6a74ffb6816bd1460f41f9fea1620


More information about the xmonad mailing list