[Haskell-cafe] cURL under Windows again
Iliya Kuznetsov
iliya.kuznetsov at gmail.com
Mon Feb 2 07:45:11 EST 2009
Hello cafe-subscribers,
I saw some issues about installing haskell bindings for cURL under Windows,
and now I'm trapped too.
So, here is actions' log for everything (very detail; you can PgDn to the
end with questions):
1. Windows Vista without UAC
2. ghc-6.10.1-i386-windows.exe is installed to C:\Program Files\Haskell
"C:\Program Files\Haskell\package.conf" wasn't touched after
installation (Cabal nor manually)
3. MinGW-5.1.4 installed to C:\temp\MinGW
4. MSys-1.0 installed to C:\temp\msys\1.0\
5. curl-7.19.3.tar.bz2 had taken from
http://curl.haxx.se/download/curl-7.19.3.tar.bz2
6. Under msys, curl-7.19.3.tar.bz2 is untared into
/home/Kuznetsov/curl-7.19.3
7. cURL is made as:
cd curl-7.19.3
$ ./configure
configure: Configured to build curl/libcurl:
...
curl version: 7.19.3
Host setup: i686-pc-mingw32
Install prefix: /usr/local
Compiler: gcc
SSL support: no (--with-ssl / --with-gnutls)
SSH support: no (--with-libssh2)
zlib support: no (--with-zlib)
krb4 support: no (--with-krb4*)
GSSAPI support: no (--with-gssapi)
SPNEGO support: no (--with-spnego)
c-ares support: no (--enable-ares)
ipv6 support: no (--enable-ipv6)
IDN support: no (--with-libidn)
Build libcurl: Shared=yes, Static=yes
Built-in manual: no (--enable-manual)
Verbose errors: enabled (--disable-verbose)
SSPI support: no (--enable-sspi)
ca cert bundle: no
ca cert path: no
LDAP support: enabled (winldap)
LDAPS support: no (--enable-ldaps)
$ make
...
make[2]: Leaving directory `/home/Kuznetsov/curl-7.19.3/src'
make[1]: Leaving directory `/home/Kuznetsov/curl-7.19.3/src'
make[1]: Entering directory `/home/Kuznetsov/curl-7.19.3'
make[1]: Nothing to be done for `all-am'.
make[1]: Leaving directory `/home/Kuznetsov/curl-7.19.3'
$ make install
...
libtool: install: /bin/install -c .libs/libcurl.dll.a
/usr/local/lib/libcurl.dll.a
libtool: install: base_file=`basename libcurl.la`
libtool: install: dlpath=`/bin/sh 2>&1 -c '. .libs/'libcurl.la'i; echo
libcurl-4.dll'`
libtool: install: dldir=/usr/local/lib/`dirname ../bin/libcurl-4.dll`
libtool: install: test -d /usr/local/lib/../bin || mkdir -p
/usr/local/lib/../bin
libtool: install: /bin/install -c .libs/libcurl-4.dll
/usr/local/lib/../bin/libcurl-4.dll
libtool: install: chmod a+x /usr/local/lib/../bin/libcurl-4.dll
libtool: install: if test -n '' && test -n 'strip --strip-unneeded'; then
eval 'strip --strip-unneeded /usr/local/lib/../bin/libcurl-4.dll' || exit 0;
fi
libtool: install: /bin/install -c .libs/libcurl.lai /usr/local/lib/
libcurl.la
libtool: install: /bin/install -c .libs/libcurl.a /usr/local/lib/libcurl.a
libtool: install: chmod 644 /usr/local/lib/libcurl.a
libtool: install: ranlib /usr/local/lib/libcurl.a
----------------------------------------------------------------------
Libraries have been installed in:
/usr/local/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-LLIBDIR' linker flag
...
/bin/install -c -m 644 'curl.h' '/usr/local/include/curl/curl.h'
/bin/install -c -m 644 'curlver.h' '/usr/local/include/curl/curlver.h'
/bin/install -c -m 644 'easy.h' '/usr/local/include/curl/easy.h'
/bin/install -c -m 644 'mprintf.h' '/usr/local/include/curl/mprintf.h'
/bin/install -c -m 644 'stdcheaders.h'
'/usr/local/include/curl/stdcheaders.h'
/bin/install -c -m 644 'types.h' '/usr/local/include/curl/types.h'
/bin/install -c -m 644 'multi.h' '/usr/local/include/curl/multi.h'
/bin/install -c -m 644 'typecheck-gcc.h'
'/usr/local/include/curl/typecheck-gcc.h'
/bin/install -c -m 644 'curlbuild.h' '/usr/local/include/curl/curlbuild.h'
/bin/install -c -m 644 'curlrules.h' '/usr/local/include/curl/curlrules.h'
...
8. $ which curl && curl
/usr/local/bin/curl
curl: try 'curl --help' for more information
I have following files in C:\temp\msys\1.0\local\bin\ (/usr/local/bin in
Unix-scheme):
02.02.2009 15:10 4 029 curl-config
02.02.2009 15:10 98 591 curl.exe
02.02.2009 15:09 262 934 libcurl-4.dll
In /usr/local/include/curl ten includes:
02.02.2009 15:10 67 183 curl.h
02.02.2009 15:10 5 865 curlbuild.h
02.02.2009 15:10 7 478 curlrules.h
02.02.2009 15:10 2 799 curlver.h
02.02.2009 15:10 3 526 easy.h
02.02.2009 15:10 2 850 mprintf.h
02.02.2009 15:10 13 039 multi.h
02.02.2009 15:10 1 383 stdcheaders.h
02.02.2009 15:10 33 337 typecheck-gcc.h
02.02.2009 15:10 15 types.h
----
Sorry for many details, but now I can show the wrong behaviour of the
haskell bindings for cURL under windows:
9. curl-1.3.4 is taken from hackage and unzipped to /home/Kuznetsov
$ cd ~/curl-1.3.4
$ runhaskell Setup.hs configure --extra-include-dirs=/usr/local/include
--extra-lib-dirs=/usr/local/lib
Configuring curl-1.3.4...
$ runhaskell Setup.hs build
Preprocessing library curl-1.3.4...
Building curl-1.3.4...
[1 of 8] Compiling Network.Curl.Debug ( Network\Curl\Debug.hs,
dist\build\Network\Curl\Debug.o )
[2 of 8] Compiling Network.Curl.Types ( Network\Curl\Types.hs,
dist\build\Network\Curl\Types.o )
[3 of 8] Compiling Network.Curl.Post ( Network\Curl\Post.hs,
dist\build\Network\Curl\Post.o )
[4 of 8] Compiling Network.Curl.Opts ( Network\Curl\Opts.hs,
dist\build\Network\Curl\Opts.o )
[5 of 8] Compiling Network.Curl.Code ( Network\Curl\Code.hs,
dist\build\Network\Curl\Code.o )
[6 of 8] Compiling Network.Curl.Info ( Network\Curl\Info.hs,
dist\build\Network\Curl\Info.o )
Network\Curl\Info.hs:80:0:
Warning: Defined but not used: `stringTag'
Network\Curl\Info.hs:83:0: Warning: Defined but not used: `longTag'
Network\Curl\Info.hs:86:0:
Warning: Defined but not used: `doubleTag'
Network\Curl\Info.hs:89:0:
Warning: Defined but not used: `slistTag'
[7 of 8] Compiling Network.Curl.Easy ( Network\Curl\Easy.hs,
dist\build\Network\Curl\Easy.o )
[8 of 8] Compiling Network.Curl ( Network\Curl.hs,
dist\build\Network\Curl.o )
C:\Program Files\Haskell\bin\ar.exe: creating dist\build\libHScurl-1.3.4.a
$ runhaskell Setup.hs install
Installing library in C:\Program Files\Haskell\curl-1.3.4\ghc-6.10.1
Registering curl-1.3.4...
Reading package info from "dist\\installed-pkg-config" ... done.
Writing new package config file... done.
10.
In package.conf I have seen:
InstalledPackageInfo {package = PackageIdentifier {pkgName = PackageName
"curl", pkgVersion = Version {versionBranch = [1,3,4], versionTags = []}},
license = BSD3, copyright = "", maintainer = "Sigbjorn Finne <
sigbjorn.finne at gmail.com>", author = "Sigbjorn Finne", stability = "",
homepage = "", pkgUrl = "", description = "libcurl is a client-side URL
transfer library, supporting FTP, FTPS, HTTP,\nHTTPS, SCP, SFTP, TFTP,
TELNET, DICT, LDAP, LDAPS and FILE.\nlibcurl supports SSL certificates, HTTP
POST, HTTP PUT, FTP uploading,\nHTTP form based upload, proxies, cookies,
user+password authentication\n(Basic, Digest, NTLM, Negotiate, Kerberos4),
file transfer resume,\nhttp proxy tunneling and more!\n\nThis package
provides a Haskell binding to libcurl.", category = "Network", exposed =
True, exposedModules = ["Network.Curl","Network.Curl.Code","
Network.Curl.Info","Network.Curl.Opts","Network.Curl.Post","Network.Curl.Types","Network.Curl.Easy","Network.Curl.Debug"],
hiddenModules = [], importDirs = ["C:\\Program
Files\\Haskell\\curl-1.3.4\\ghc-6.10.1"], libraryDirs = ["C:\\Program
Files\\Haskell\\curl-1.3.4\\ghc-6.10.1","C:/temp/msys/1.0/local/lib"],
hsLibraries = ["HScurl-1.3.4"], extraLibraries = ["curl"],
extraGHCiLibraries = [], includeDirs = ["C:/temp/msys/1.0/local/include"],
includes = [], depends = [PackageIdentifier {pkgName = PackageName "base",
pkgVersion = Version {versionBranch = [3,0,3,0], versionTags =
[]}},PackageIdentifier {pkgName = PackageName "bytestring", pkgVersion =
Version {versionBranch = [0,9,1,4], versionTags = []}},PackageIdentifier
{pkgName = PackageName "containers", pkgVersion = Version {versionBranch =
[0,2,0,0], versionTags = []}}], hugsOptions = [], ccOptions = [], ldOptions
= [], frameworkDirs = [], frameworks = [], haddockInterfaces = ["C:\\Program
Files\\Haskell\\doc\\curl-1.3.4\\html\\curl.haddock"], haddockHTMLs =
["C:\\Program Files\\Haskell\\doc\\curl-1.3.4\\html"]}
In "C:\Program Files\Haskell\curl-1.3.4\ghc-6.10.1\" I have seen
HScurl-1.3.4.o , libHScurl-1.3.4.a and other Curl files.
11. Final tests:
under msys:
$ ghci
Prelude> :m Network.Curl
module `Network.Curl' is not loaded
Bad, but not a disaster.
under windows:
C:\> ghci
GHCi, version 6.10.1: http://www.haskell.org/ghc/ :? for help
Loading package ghc-prim ... linking ... done.
Loading package integer ... linking ... done.
Loading package base ... linking ... done.
Prelude> :m Network.Curl
Prelude Network.Curl> let a = curlGet
Loading package syb ... linking ... done.
Loading package base-3.0.3.0 ... linking ... done.
Loading package array-0.2.0.0 ... linking ... done.
Loading package containers-0.2.0.0 ... linking ... done.
Loading package bytestring-0.9.1.4 ... linking ... done.
Loading package curl-1.3.4 ... <interactive>: curl: Не найден указанный
модуль. (text in russian here because of localized Vista. The message is
near "Can't load specified module")
can't load .so/.DLL for: curl (addDLL: could not load DLL)
Prelude Network.Curl>
So, the question is why curl doesn't work? I tried to use Cabal but it
failed with building too.
How can I test the fact that C:\temp\msys\1.0\local\bin\libcurl-4.dll is
used in curl-1.3.4 ?
--
Iliya Kuznetsov
+7-916-878-75-70
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.haskell.org/pipermail/haskell-cafe/attachments/20090202/0d8b2bd1/attachment.htm
More information about the Haskell-Cafe
mailing list