Error building ghc on raspberry pi.

[roconnor at theorem.ca]

In theory we could try a couple variations of builds at the same time. 
But at the moment, I'm running low on ideas on what to try.

I just got the, extensive, raspbian patches for 7.4.1 and I'm going to 
browse through them when I get time (apt-get source ghc).

On Tue, 15 Jan 2013, Neil Davies wrote:

> Hi - would another RPi (or even 2 from tomorrow another one arriving) help?
>
> I can make them accessible (i.e. in our DMZ) -
>
> Neil
>
> On 15 Jan 2013, at 16:36, roconnor at theorem.ca wrote:
>
>> On Mon, 14 Jan 2013, Thijs Alkemade wrote:
>>
>>> Op 14 jan. 2013, om 17:30 heeft roconnor at theorem.ca het volgende geschreven:
>>>
>>>> On Thu, 10 Jan 2013, Karel Gardas wrote:
>>>>
>>>>>
>>>>> Hmm, are you using Raspbian? I.e. hard-float abi caught my eye in case of ARMv6/ARM11 chip here...
>>>>>
>>>>> I'm afraid LLVM is not well guided in your case so could you be so kind and test if adding -optlc=-mattr=+vfp2 helps? You need to add it to your build.mk probably and you will need to rebuild everything again...
>>>>
>>>> No change with
>>>>
>>>> SRC_HC_OPTS        = -H64m -Rghc-timing -optc-mfloat-abi=hard -optc-march=armv6 -optc-mfpu=vfp -optlc=-mattr=+vfp2
>>>> GhcStage1HcOpts    = -O -fllvm
>>>> GhcStage2HcOpts    = -O0 -fllvm
>>>> GhcLibHcOpts       = -O -fllvm
>>>>
>>>> I still get the error:
>>>>
>>>> ===--- building final phase
>>>> make -r --no-print-directory -f ghc.mk phase=final all
>>>> LD libraries/ghc-prim/dist-install/build/HSghc-prim-0.3.0.0.o
>>>> /usr/bin/ld: error: libraries/ghc-prim/dist-install/build/cbits/debug.o uses VFP register arguments, libraries/ghc-prim/dist-install/build/HSghc-prim-0.3.0.0.o does not
>>>> /usr/bin/ld: failed to merge target specific data of file libraries/ghc-prim/dist-install/build/cbits/debug.o
>>>>
>>>> I don't really understand what is going on here.  The file libraries/ghc-prim/dist-install/build/HSghc-prim-0.3.0.0.o doesn't even exist, so when I manually run /usr/bin/ld I get:
>>>>
>>>> $ /usr/bin/ld libraries/ghc-prim/dist-install/build/HSghc-prim-0.3.0.0.o
>>>> /usr/bin/ld: cannot find libraries/ghc-prim/dist-install/build/HSghc-prim-0.3.0.0.o: No such file or directory
>>>>
>>>> What is make really doing here?
>>>>
>>>> My research suggests that this error is a symptom of trying to link something without the hard-float ABI together with something with a soft-float ABI.  But I don't know where libraries/ghc-prim/dist-install/build/HSghc-prim-0.3.0.0.o is coming from.
>>>
>>> libraries/ghc-prim/dist-install/build/HSghc-prim-0.3.0.0.o is the output ld was asked to generate. Apparently, some of the input .o files didn't use VFP register arguments, so ld concluded that the output should also not use VFP register arguments. But then ld encountered a .o file that did use VFP register arguments, and threw an error (something in cbits, so probably built with different CFLAGS).
>>>
>>> From your flags I'd say you miss -optlc-float-abi=hard. I had it in GhcLibHcOpts, but I'm not sure that is the correct way to ensure it is passed to everything exactly once.
>>
>> Okay, I tried:
>>
>> SRC_HC_OPTS        = -H64m -Rghc-timing -optc-mfloat-abi=hard -optc-march=armv6 -optc-mfpu=vfp -optlc=-mattr=+vfp2
>> GhcStage1HcOpts    = -O -fllvm
>> GhcStage2HcOpts    = -O0 -fllvm
>> GhcLibHcOpts       = -O -fllvm -optlc-float-abi=hard
>>
>> and I got the same error at a different build step.  I'm not sure if it is earlier or later.
>>
>> It seems still not everything is using the hard-float ABI.
>>
>> ===--- building final phase
>> make -r --no-print-directory -f ghc.mk phase=final all
>>  HC [stage 1] utils/hsc2hs/dist-install/build/tmp/hsc2hs
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, utils/hsc2hs/dist-install/build/Main.o does not
>> /usr/bin/ld: failed to merge target specific data of file utils/hsc2hs/dist-install/build/Main.o
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, utils/hsc2hs/dist-install/build/HSCParser.o does not
>> /usr/bin/ld: failed to merge target specific data of file utils/hsc2hs/dist-install/build/HSCParser.o
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, utils/hsc2hs/dist-install/build/DirectCodegen.o does not
>> /usr/bin/ld: failed to merge target specific data of file utils/hsc2hs/dist-install/build/DirectCodegen.o
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, utils/hsc2hs/dist-install/build/CrossCodegen.o does not
>> /usr/bin/ld: failed to merge target specific data of file utils/hsc2hs/dist-install/build/CrossCodegen.o
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, utils/hsc2hs/dist-install/build/UtilsCodegen.o does not
>> /usr/bin/ld: failed to merge target specific data of file utils/hsc2hs/dist-install/build/UtilsCodegen.o
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, utils/hsc2hs/dist-install/build/Common.o does not
>> /usr/bin/ld: failed to merge target specific data of file utils/hsc2hs/dist-install/build/Common.o
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, utils/hsc2hs/dist-install/build/C.o does not
>> /usr/bin/ld: failed to merge target specific data of file utils/hsc2hs/dist-install/build/C.o
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, utils/hsc2hs/dist-install/build/Flags.o does not
>> /usr/bin/ld: failed to merge target specific data of file utils/hsc2hs/dist-install/build/Flags.o
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, utils/hsc2hs/dist-install/build/Paths_hsc2hs.o does not
>> /usr/bin/ld: failed to merge target specific data of file utils/hsc2hs/dist-install/build/Paths_hsc2hs.o
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(Apply.o) does not
>> /usr/bin/ld: failed to merge target specific data of file /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(Apply.o)
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(Exception.o) does not
>> /usr/bin/ld: failed to merge target specific data of file /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(Exception.o)
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(HeapStackCheck.o) does not
>> /usr/bin/ld: failed to merge target specific data of file /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(HeapStackCheck.o)
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(PrimOps.o) does not
>> /usr/bin/ld: failed to merge target specific data of file /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(PrimOps.o)
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(StgMiscClosures.o) does not
>> /usr/bin/ld: failed to merge target specific data of file /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(StgMiscClosures.o)
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(StgStartup.o) does not
>> /usr/bin/ld: failed to merge target specific data of file /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(StgStartup.o)
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(StgStdThunks.o) does not
>> /usr/bin/ld: failed to merge target specific data of file /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(StgStdThunks.o)
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(Updates.o) does not
>> /usr/bin/ld: failed to merge target specific data of file /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(Updates.o)
>> /usr/bin/ld: error: utils/hsc2hs/dist-install/build/tmp/hsc2hs uses VFP register arguments, /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(AutoApply.o) does not
>> /usr/bin/ld: failed to merge target specific data of file /tmp/ghc-7.6.1b/rts/dist/build/libHSrts.a(AutoApply.o)
>> collect2: ld returned 1 exit status
>> <<ghc: 10689448 bytes, 2 GCs, 95944/95944 avg/max bytes residency (1 samples), 62M in use, 0.00 INIT (0.00 elapsed), 0.81 MUT (9.41 elapsed), 0.13 GC (0.13 elapsed) :ghc>>
>> make[1]: *** [utils/hsc2hs/dist-install/build/tmp/hsc2hs] Error 1
>> make: *** [all] Error 2
>>
>> --
>> Russell O'Connor                                      <http://r6.ca/>
>> ``All talk about `theft,''' the general counsel of the American Graphophone
>> Company wrote, ``is the merest claptrap, for there exists no property in
>> ideas musical, literary or artistic, except as defined by statute.''
>>
>> _______________________________________________
>> Glasgow-haskell-users mailing list
>> Glasgow-haskell-users at haskell.org
>> http://www.haskell.org/mailman/listinfo/glasgow-haskell-users
>

-- 
Russell O'Connor                                      <http://r6.ca/>
``All talk about `theft,''' the general counsel of the American Graphophone
Company wrote, ``is the merest claptrap, for there exists no property in
ideas musical, literary or artistic, except as defined by statute.''