[Git][ghc/ghc][wip/cleanup-selfboot] 24 commits: Remove JavaScriptFFI from --supported-extensions for non-JS targets (#11214)
Krzysztof Gogolewski (@monoidal)
gitlab at gitlab.haskell.org
Thu Jun 1 12:49:58 UTC 2023
Krzysztof Gogolewski pushed to branch wip/cleanup-selfboot at Glasgow Haskell Compiler / GHC
Commits:
0350b186 by Josh Meredith at 2023-05-29T12:46:27+00:00
Remove JavaScriptFFI from --supported-extensions for non-JS targets (#11214)
- - - - -
b4816919 by Matthew Pickering at 2023-05-30T17:07:43-04:00
testsuite: Pass -kb16k -kc128k for performance tests
Setting a larger stack chunk size gives a greater protection
from stack thrashing (where the repeated overflow/underflow allocates a lot of
stack chunks which sigificantly impact allocations). This
stabilises some tests against differences cause by more things being
pushed onto the stack.
The performance tests are generally testing work done by the compiler,
using allocation as a proxy, so removing/stabilising the allocations due
to the stack gives us more stable tests which are also more sensitive
to actual changes in compiler performance.
The tests which increase are ones where we compile a lot of modules, and
for each module we spawn a thread to compile the module in. Therefore
increasing these numbers has a multiplying effect on these tests because
there are many more stacks which we can increase in size.
The most significant improvements though are cases such as T8095 which
reduce significantly in allocations (30%). This isn't a performance
improvement really but just helps stabilise the test against this
threshold set by the defaults.
Fixes #23439
-------------------------
Metric Decrease:
InstanceMatching
T14683
T8095
T9872b_defer
T9872d
T9961
hie002
T19695
T3064
Metric Increase:
MultiLayerModules
T13701
T14697
-------------------------
- - - - -
6629f1c5 by Ben Gamari at 2023-05-30T17:08:20-04:00
Move via-C flags into GHC
These were previously hardcoded in configure (with no option for
overriding them) and simply passed onto ghc through the settings file.
Since configure already guarantees gcc supports those flags, we simply
move them into GHC.
- - - - -
981e5e11 by Arnaud Spiwack at 2023-05-31T08:34:33-04:00
Allow CPR on unrestricted constructors
Per the new `Note [Linting linearity]`, we want optimisations over
trying to preserve linearity. This will allow CPR to handle `Ur`, in
particular.
- - - - -
bf9344d2 by Arnaud Spiwack at 2023-05-31T08:34:33-04:00
Push coercions across multiplicity boundaries
Per the new `Note [Linting linearity]`, we want optimisations over
trying to preserve linearity. This will avoid preventing inlinings and
reductions and make linear programs more efficient.
- - - - -
d56dd695 by sheaf at 2023-05-31T11:37:12-04:00
Data.Bag: add INLINEABLE to polymorphic functions
This commit allows polymorphic methods in GHC.Data.Bag to be
specialised, avoiding having to pass explicit dictionaries when they
are instantiated with e.g. a known monad.
- - - - -
5366cd35 by sheaf at 2023-05-31T11:37:12-04:00
Split off TcBinderStack into its own module
This commit splits off TcBinderStack into its own module,
to avoid module cycles: we might want to refer to it without also
pulling in the TcM monad.
- - - - -
09d4d307 by sheaf at 2023-05-31T11:37:12-04:00
Split off TcRef into its own module
This helps avoid pull in the full TcM monad when we just want access
to mutable references in the typechecker. This facilitates later patches
which introduce a slimmed down TcM monad for zonking.
- - - - -
88cc19b3 by sheaf at 2023-05-31T11:37:12-04:00
Introduce Codensity monad
The Codensity monad is useful to write state-passing computations in
continuation-passing style, e.g. to implement a State monad as
continuation-passing style over a Reader monad.
- - - - -
f62d8195 by sheaf at 2023-05-31T11:37:12-04:00
Restructure the zonker
This commit splits up the zonker into a few separate components, described
in Note [The structure of the zonker] in `GHC.Tc.Zonk.Type`.
1. `GHC.Tc.Zonk.Monad` introduces a pared-down `TcM` monad, `ZonkM`,
which has enough information for zonking types.
This allows us to refactor `ErrCtxt` to use `ZonkM` instead of `TcM`,
which guarantees we don't throw an error while reporting an error.
2. `GHC.Tc.Zonk.Env` is the new home of `ZonkEnv`, and also defines
two zonking monad transformers, `ZonkT` and `ZonkBndrT`.
`ZonkT` is a reader monad transformer over `ZonkEnv`.
`ZonkBndrT m` is the codensity monad over `ZonkT m`.
`ZonkBndrT` is used for computations that accumulate binders
in the `ZonkEnv`.
3. `GHC.Tc.Zonk.TcType` contains the code for zonking types, for use
in the typechecker. It uses the `ZonkM` monad.
4. `GHC.Tc.Zonk.Type` contains the code for final zonking to `Type`,
which has been refactored to use `ZonkTcM = ZonkT TcM` and
`ZonkBndrTcM = ZonkBndrT TcM`.
Allocations slightly decrease on the whole due to using
continuation-passing style instead of manual state passing of ZonkEnv
in the final zonking to Type.
-------------------------
Metric Decrease:
T4029
T8095
T14766
T15304
hard_hole_fits
RecordUpdPerf
Metric Increase:
T10421
-------------------------
- - - - -
70526f5b by mimi.vx at 2023-05-31T11:37:53-04:00
Update rdt-theme to latest upstream version
Fixes https://gitlab.haskell.org/ghc/ghc/-/issues/23444
- - - - -
f3556d6c by Finley McIlwaine at 2023-06-01T04:53:12-04:00
Restructure IPE buffer layout
Reference ticket #21766
This commit restructures IPE buffer list entries to not contain
references to their corresponding info tables. IPE buffer list nodes now
point to two lists of equal length, one holding the list of info table
pointers and one holding the corresponding entries for each info table.
This will allow the entry data to be compressed without losing the
references to the info tables.
- - - - -
5d1f2411 by Finley McIlwaine at 2023-06-01T04:53:12-04:00
Add IPE compression to configure
Reference ticket #21766
Adds an `--enable-ipe-data-compreesion` flag to the configure script
which will check for libzstd and set the appropriate flags to allow for
IPE data compression in the compiler
- - - - -
b7a640ac by Finley McIlwaine at 2023-06-01T04:53:12-04:00
IPE data compression
Reference ticket #21766
When IPE data compression is enabled, compress the emitted IPE buffer
entries and decompress them in the RTS.
- - - - -
5aef5658 by Finley McIlwaine at 2023-06-01T04:53:12-04:00
Fix libzstd detection in configure and RTS
Ensure that `HAVE_LIBZSTD` gets defined to either 0 or 1 in all cases
and properly check that before IPE data decompression in the RTS. See
ticket #21766.
- - - - -
69563c97 by Finley McIlwaine at 2023-06-01T04:53:12-04:00
Add note describing IPE data compression
See ticket #21766
- - - - -
7872e2b6 by Finley McIlwaine at 2023-06-01T04:53:12-04:00
Fix byte order of IPE data, fix IPE tests
Make sure byte order of written IPE buffer entries matches target.
Make sure the IPE-related tests properly access the fields of IPE buffer
entry nodes with the new IPE layout.
This commit also introduces checks to avoid importing modules if IPE
compression is not enabled.
See ticket #21766.
- - - - -
0e85099b by Finley McIlwaine at 2023-06-01T04:53:12-04:00
Fix IPE data decompression buffer allocation
Capacity of buffers allocated for decompressed IPE data was
incorrect due to a misuse of the `ZSTD_findFrameCompressedSize`
function. Fix by always storing decompressed size of IPE data in IPE
buffer list nodes and using `ZSTD_findFrameCompressedSize` to determine
the size of the compressed data.
See ticket #21766
- - - - -
a0048866 by Finley McIlwaine at 2023-06-01T04:53:12-04:00
Add optional dependencies to ./configure output
Changes the configure script to indicate whether libnuma, libzstd, or
libdw are being used as dependencies due to their optional features
being enabled.
- - - - -
09d93bd0 by Finley McIlwaine at 2023-06-01T04:53:12-04:00
Add IPE-enabled builds to CI
- Adds an IPE job to the CI pipeline which is triggered by the ~IPE label
- Introduces CI logic to enable IPE data compression
- Enables uncompressed IPE data on debug CI job
- Regenerates jobs.yaml
MR https://gitlab.haskell.org/ghc/ci-images/-/merge_requests/112 on the
images repository is meant to ensure that the proper images have
libzstd-dev installed.
- - - - -
3ded9a1c by Finley McIlwaine at 2023-06-01T04:53:12-04:00
Update user's guide and release notes, small fixes
Add mention of IPE data compression to user's guide and the release
notes for 9.8.1. Also note the impact compression has on binary size in
both places.
Change IpeBufferListNode compression check so only the value `1`
indicates compression.
See ticket #21766
- - - - -
41b41577 by Finley McIlwaine at 2023-06-01T04:53:12-04:00
Remove IPE enabled builds from CI
We don't need to explicitly specify the +ipe transformer to test IPE data
since there are tests which manually enable IPE information. This commit does
leave zstd IPE data compression enabled on the debian CI jobs.
- - - - -
982bef3a by Krzysztof Gogolewski at 2023-06-01T04:53:49-04:00
Fix build with 9.2
GHC.Tc.Zonk.Type uses an equality constraint.
ghc.nix currently provides 9.2.
- - - - -
2816b7a5 by Krzysztof Gogolewski at 2023-06-01T13:55:44+02:00
cleanup: Remove unused field from SelfBoot
It is no longer needed since Note [Extra dependencies from .hs-boot files]
was deleted in 6998772043.
I've also added tildes to Note headers, otherwise they're not detected
by the linter.
- - - - -
30 changed files:
- .gitlab/gen_ci.hs
- .gitlab/jobs.yaml
- compiler/GHC/Builtin/Types/Prim.hs
- compiler/GHC/Core/Opt/Arity.hs
- compiler/GHC/Core/Opt/WorkWrap/Utils.hs
- compiler/GHC/Core/Type.hs
- compiler/GHC/CoreToStg/Prep.hs
- compiler/GHC/Data/Bag.hs
- compiler/GHC/Data/IOEnv.hs
- compiler/GHC/Driver/Main.hs
- compiler/GHC/Driver/Session.hs
- compiler/GHC/Hs/Utils.hs
- compiler/GHC/HsToCore/Binds.hs
- compiler/GHC/HsToCore/Expr.hs
- compiler/GHC/HsToCore/Match/Literal.hs
- compiler/GHC/HsToCore/Pmc/Desugar.hs
- compiler/GHC/IfaceToCore.hs
- compiler/GHC/JS/Optimizer.hs
- compiler/GHC/Rename/Env.hs
- compiler/GHC/Rename/Names.hs
- compiler/GHC/Rename/Pat.hs
- compiler/GHC/Rename/Splice.hs
- compiler/GHC/Runtime/Eval.hs
- compiler/GHC/Runtime/Heap/Inspect.hs
- compiler/GHC/Settings/IO.hs
- compiler/GHC/StgToCmm/InfoTableProv.hs
- compiler/GHC/Tc/Deriv/Generate.hs
- compiler/GHC/Tc/Deriv/Infer.hs
- compiler/GHC/Tc/Deriv/Utils.hs
- compiler/GHC/Tc/Errors.hs
The diff was not included because it is too large.
View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/112c2201e01208f237f26c4d0b10c755f5444b76...2816b7a5ac57b7dba04b787694be14d8f9d2832f
--
View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/112c2201e01208f237f26c4d0b10c755f5444b76...2816b7a5ac57b7dba04b787694be14d8f9d2832f
You're receiving this email because of your account on gitlab.haskell.org.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.haskell.org/pipermail/ghc-commits/attachments/20230601/ec456251/attachment-0001.html>
More information about the ghc-commits
mailing list