[Git][ghc/ghc][wip/keep-going-hs-boot] 318 commits: nonmoving: Clear bitmap after initializing block size
cgibbard
gitlab at gitlab.haskell.org
Fri Jun 26 07:59:31 UTC 2020
cgibbard pushed to branch wip/keep-going-hs-boot at Glasgow Haskell Compiler / GHC
Commits:
2aa67611 by Ben Gamari at 2020-04-30T21:34:44-04:00
nonmoving: Clear bitmap after initializing block size
Previously nonmovingInitSegment would clear the bitmap before
initializing the segment's block size. This is broken since
nonmovingClearBitmap looks at the segment's block size to determine how
much bitmap to clear.
- - - - -
54dad3cf by Ben Gamari at 2020-04-30T21:34:44-04:00
nonmoving: Explicitly memoize block count
A profile cast doubt on whether the compiler hoisted the bound out the
loop as I would have expected here. It turns out it did but nevertheless
it seems clearer to just do this manually.
- - - - -
99ff8145 by Ben Gamari at 2020-04-30T21:34:44-04:00
nonmoving: Eagerly flush all capabilities' update remembered sets
(cherry picked from commit 2fa79119570b358a4db61446396889b8260d7957)
- - - - -
05b0a9fd by Ömer Sinan Ağacan at 2020-04-30T21:35:24-04:00
Remove OneShotInfo field of LFReEntrant, document OneShotInfo
The field is only used in withNewTickyCounterFun and it's easier to
directly pass a parameter for one-shot info to withNewTickyCounterFun
instead of passing it via LFReEntrant. This also makes !2842 simpler.
Other changes:
- New Note (by SPJ) [OneShotInfo overview] added.
- Arity argument of thunkCode removed as it's always 0.
- - - - -
a43620c6 by Ömer Sinan Ağacan at 2020-04-30T21:35:24-04:00
GHC.StgToCmm.Ticky: remove a few unused stuff
- - - - -
780de9e1 by Sylvain Henry at 2020-05-01T10:37:39-04:00
Use platform in Iface Binary
- - - - -
f8386c7b by Sylvain Henry at 2020-05-01T10:37:39-04:00
Refactor PprDebug handling
If `-dppr-debug` is set, then PprUser and PprDump styles are silently
replaced with PprDebug style. This was done in `mkUserStyle` and
`mkDumpStyle` smart constructors. As a consequence they needed a
DynFlags parameter.
Now we keep the original PprUser and PprDump styles until they are used
to create an `SDocContext`. I.e. the substitution is only performed in
`initSDocContext`.
- - - - -
b3df9e78 by Sylvain Henry at 2020-05-01T10:37:39-04:00
Remove PprStyle param of logging actions
Use `withPprStyle` instead to apply a specific style to a SDoc.
- - - - -
de9fc995 by Sylvain Henry at 2020-05-01T10:37:39-04:00
Fully remove PprDebug
PprDebug was a pain to deal with consistently as it is implied by
`-dppr-debug` but it isn't really a PprStyle. We remove it completely
and query the appropriate SDoc flag instead (`sdocPprDebug`) via
helpers (`getPprDebug` and its friends).
- - - - -
8b51fcbd by Sebastian Graf at 2020-05-01T10:38:16-04:00
PmCheck: Only call checkSingle if we would report warnings
- - - - -
fd7ea0fe by Sebastian Graf at 2020-05-01T10:38:16-04:00
PmCheck: Pick up `EvVar`s bound in `HsWrapper`s for long-distance info
`HsWrapper`s introduce evidence bindings through `WpEvLam` which the
pattern-match coverage checker should be made aware of.
Failing to do so caused #18049, where the resulting impreciseness of
imcompleteness warnings seemingly contradicted with
`-Winaccessible-code`.
The solution is simple: Collect all the evidence binders of an
`HsWrapper` and add it to the ambient `Deltas` before desugaring
the wrapped expression.
But that means we pick up many more evidence bindings, even when they
wrap around code without a single pattern match to check! That regressed
`T3064` by over 300%, so now we are adding long-distance info lazily
through judicious use of `unsafeInterleaveIO`.
Fixes #18049.
- - - - -
7bfe9ac5 by Ben Gamari at 2020-05-03T04:41:33-04:00
rts: Enable tracing of nonmoving heap census with -ln
Previously this was not easily available to the user. Fix this.
Non-moving collection lifecycle events are now reported with -lg.
- - - - -
c560dd07 by Ben Gamari at 2020-05-03T04:41:33-04:00
users guide: Move eventlog documentation users guide
- - - - -
02543d5e by Ben Gamari at 2020-05-03T04:41:33-04:00
users guide: Add documentation for non-moving GC events
- - - - -
b465dd45 by Alexis King at 2020-05-03T04:42:12-04:00
Flatten nested casts in the simple optimizer
Normally, we aren’t supposed to generated any nested casts, since mkCast
takes care to flatten them, but the simple optimizer didn’t use mkCast,
so they could show up after inlining. This isn’t really a problem, since
the simplifier will clean them up immediately anyway, but it can clutter
the -ddump-ds output, and it’s an extremely easy fix.
closes #18112
- - - - -
8bdc03d6 by Simon Peyton Jones at 2020-05-04T01:56:59-04:00
Don't return a panic in tcNestedSplice
In GHC.Tc.Gen.Splice.tcNestedSplice we were returning a
typechecked expression of "panic". That is usually OK, because
the result is discarded. But it happens that tcApp now looks at
the typechecked expression, trivially, to ask if it is tagToEnum.
So being bottom is bad.
Moreover a debug-trace might print it out.
So better to return a civilised expression, even though it is
usually discarded.
- - - - -
0bf640b1 by Baldur Blöndal at 2020-05-04T01:57:36-04:00
Don't require parentheses around via type (`-XDerivingVia'). Fixes #18130".
- - - - -
30272412 by Artem Pelenitsyn at 2020-05-04T13:19:59-04:00
Remove custom ExceptionMonad class (#18075) (updating haddock submodule accordingly)
- - - - -
b9f7c08f by jneira at 2020-05-04T13:20:37-04:00
Remove unused hs-boot file
- - - - -
1d8f80cd by Sylvain Henry at 2020-05-05T03:22:46-04:00
Remove references to -package-key
* remove references to `-package-key` which has been removed in 2016
(240ddd7c39536776e955e881d709bbb039b48513)
* remove support for `-this-package-key` which has been deprecated at the
same time
- - - - -
7bc3a65b by Sylvain Henry at 2020-05-05T03:23:31-04:00
Remove SpecConstrAnnotation (#13681)
This has been deprecated since 2013. Use GHC.Types.SPEC instead.
Make GHC.Exts "not-home" for haddock
Metric Decrease:
haddock.base
- - - - -
3c862f63 by DenisFrezzato at 2020-05-05T03:24:15-04:00
Fix Haskell98 short description in documentation
- - - - -
2420c555 by Ryan Scott at 2020-05-05T03:24:53-04:00
Add regression tests for #16244, #16245, #16758
Commit e3c374cc5bd7eb49649b9f507f9f7740697e3f70 ended up
fixing quite a few bugs:
* This commit fixes #16244 completely. A regression test has been
added.
* This commit fixes one program from #16245. (The program in
https://gitlab.haskell.org/ghc/ghc/issues/16245#note_211369 still
panics, and the program in
https://gitlab.haskell.org/ghc/ghc/issues/16245#note_211400 still
loops infinitely.) A regression test has been added for this
program.
* This commit fixes #16758. Accordingly, this patch removes the
`expect_broken` label from the `T16758` test case, moves it from
`should_compile` to `should_fail` (as it should produce an error
message), and checks in the expected stderr.
- - - - -
40c71c2c by Sylvain Henry at 2020-05-05T03:25:31-04:00
Fix colorized error messages (#18128)
In b3df9e780fb2f5658412c644849cd0f1e6f50331 I broke colorized messages
by using "dump" style instead of "user" style. This commits fixes it.
- - - - -
7ab6ab09 by Richard Eisenberg at 2020-05-06T04:39:32-04:00
Refactor hole constraints.
Previously, holes (both expression holes / out of scope variables and
partial-type-signature wildcards) were emitted as *constraints* via
the CHoleCan constructor. While this worked fine for error reporting,
there was a fair amount of faff in keeping these constraints in line.
In particular, and unlike other constraints, we could never change
a CHoleCan to become CNonCanonical. In addition:
* the "predicate" of a CHoleCan constraint was really the type
of the hole, which is not a predicate at all
* type-level holes (partial type signature wildcards) carried
evidence, which was never used
* tcNormalise (used in the pattern-match checker) had to create
a hole constraint just to extract it again; it was quite messy
The new approach is to record holes directly in WantedConstraints.
It flows much more nicely now.
Along the way, I did some cleaning up of commentary in
GHC.Tc.Errors.Hole, which I had a hard time understanding.
This was instigated by a future patch that will refactor
the way predicates are handled. The fact that CHoleCan's
"predicate" wasn't really a predicate is incompatible with
that future patch.
No test case, because this is meant to be purely internal.
It turns out that this change improves the performance of
the pattern-match checker, likely because fewer constraints
are sloshing about in tcNormalise. I have not investigated
deeply, but an improvement is not a surprise here:
-------------------------
Metric Decrease:
PmSeriesG
-------------------------
- - - - -
420b957d by Ben Gamari at 2020-05-06T04:40:08-04:00
rts: Zero block flags with -DZ
Block flags are very useful for determining the state of a block.
However, some block allocator users don't touch them, leading to
misleading values. Ensure that we zero then when zero-on-gc is set. This
is safe and makes the flags more useful during debugging.
- - - - -
740b3b8d by Ben Gamari at 2020-05-06T04:40:08-04:00
nonmoving: Fix incorrect failed_to_evac value during deadlock gc
Previously we would incorrectly set the failed_to_evac flag if we
evacuated a value due to a deadlock GC. This would cause us to mark more
things as dirty than strictly necessary. It also turned up a nasty but
which I will fix next.
- - - - -
b2d72c75 by Ben Gamari at 2020-05-06T04:40:08-04:00
nonmoving: Fix handling of dirty objects
Previously we (incorrectly) relied on failed_to_evac to be "precise".
That is, we expected it to only be true if *all* of an object's fields
lived outside of the non-moving heap. However, does not match the
behavior of failed_to_evac, which is true if *any* of the object's
fields weren't promoted (meaning that some others *may* live in the
non-moving heap).
This is problematic as we skip the non-moving write barrier for dirty
objects (which we can only safely do if *all* fields point outside of
the non-moving heap).
Clearly this arises due to a fundamental difference in the behavior
expected of failed_to_evac in the moving and non-moving collector.
e.g., in the moving collector it is always safe to conservatively say
failed_to_evac=true whereas in the non-moving collector the safe value
is false.
This issue went unnoticed as I never wrote down the dirtiness
invariant enforced by the non-moving collector. We now define this
invariant as
An object being marked as dirty implies that all of its fields are
on the mark queue (or, equivalently, update remembered set).
To maintain this invariant we teach nonmovingScavengeOne to push the
fields of objects which we fail to evacuate to the update remembered
set. This is a simple and reasonably cheap solution and avoids the
complexity and fragility that other, more strict alternative invariants
would require.
All of this is described in a new Note, Note [Dirty flags in the
non-moving collector] in NonMoving.c.
- - - - -
9f3e6884 by Zubin Duggal at 2020-05-06T04:41:08-04:00
Allow atomic update of NameCache in readHieFile
The situation arises in ghcide where multiple different threads may need to
update the name cache, therefore with the older interface it could happen
that you start reading a hie file with name cache A and produce name cache
A + B, but another thread in the meantime updated the namecache to A +
C. Therefore if you write the new namecache you will lose the A' updates
from the second thread.
Updates haddock submodule
- - - - -
edec6a6c by Ryan Scott at 2020-05-06T04:41:57-04:00
Make isTauTy detect higher-rank contexts
Previously, `isTauTy` would only detect higher-rank `forall`s, not
higher-rank contexts, which led to some minor bugs observed
in #18127. Easily fixed by adding a case for
`(FunTy InvisArg _ _)`.
Fixes #18127.
- - - - -
a95e7fe0 by Ömer Sinan Ağacan at 2020-05-06T04:42:39-04:00
ELF linker: increment curSymbol after filling in fields of current entry
The bug was introduced in a8b7cef4d45 which added a field to the
`symbols` array elements and then updated this code incorrectly:
- oc->symbols[curSymbol++] = nm;
+ oc->symbols[curSymbol++].name = nm;
+ oc->symbols[curSymbol].addr = symbol->addr;
- - - - -
cab1871a by Sylvain Henry at 2020-05-06T04:43:21-04:00
Move LeadingUnderscore into Platform (#17957)
Avoid direct use of DynFlags to know if symbols must be prefixed by an
underscore.
- - - - -
94e7c563 by Sylvain Henry at 2020-05-06T04:43:21-04:00
Don't use DynFlags in showLinkerState (#17957)
- - - - -
9afd9251 by Ryan Scott at 2020-05-06T04:43:58-04:00
Refactoring: Use bindSigTyVarsFV in rnMethodBinds
`rnMethodBinds` was explicitly using `xoptM` to determine if
`ScopedTypeVariables` is enabled before bringing type variables
bound by the class/instance header into scope. However, this `xoptM`
logic is already performed by the `bindSigTyVarsFV` function. This
patch uses `bindSigTyVarsFV` in `rnMethodBinds` to reduce the number
of places where we need to consult if `ScopedTypeVariables` is on.
This is purely refactoring, and there should be no user-visible
change in behavior.
- - - - -
6f6d72b2 by Brian Foley at 2020-05-08T15:29:25-04:00
Remove further dead code found by a simple Python script.
Avoid removing some functions that are part of an API even
though they're not used in-tree at the moment.
- - - - -
78bf8bf9 by Julien Debon at 2020-05-08T15:29:28-04:00
Add doc examples for Bifoldable
See #17929
- - - - -
66f0a847 by Julien Debon at 2020-05-08T15:29:29-04:00
doc (Bitraversable): Add examples to Bitraversable
* Add examples to Data.Bitraversable
* Fix formatting for (,) in Bitraversable and Bifoldable
* Fix mistake on bimapAccumR documentation
See #17929
- - - - -
9749fe12 by Baldur Blöndal at 2020-05-08T15:29:32-04:00
Specify kind variables for inferred kinds in base.
- - - - -
4e9aef9e by John Ericson at 2020-05-08T15:29:36-04:00
HsSigWcTypeScoping: Pull in documentation from stray location
- - - - -
f4d5c6df by John Ericson at 2020-05-08T15:29:36-04:00
Rename local `real_fvs` to `implicit_vs`
It doesn't make sense to call the "free" variables we are about to
implicitly bind the real ones.
- - - - -
20570b4b by John Ericson at 2020-05-08T15:29:36-04:00
A few tiny style nits with renaming
- Use case rather than guards that repeatedly scrutenize same thing.
- No need for view pattern when `L` is fine.
- Use type synnonym to convey the intent like elsewhere.
- - - - -
09ac8de5 by John Ericson at 2020-05-08T15:29:36-04:00
Add `forAllOrNothing` function with note
- - - - -
bb35c0e5 by Joseph C. Sible at 2020-05-08T15:29:40-04:00
Document lawlessness of Ap's Num instance
- - - - -
cdd229ff by Joseph C. Sible at 2020-05-08T15:29:40-04:00
Apply suggestion to libraries/base/Data/Monoid.hs
- - - - -
926d2aab by Joseph C. Sible at 2020-05-08T15:29:40-04:00
Apply more suggestions from Simon Jakobi
- - - - -
7a763cff by Adam Gundry at 2020-05-08T15:29:41-04:00
Reject all duplicate declarations involving DuplicateRecordFields (fixes #17965)
This fixes a bug that resulted in some programs being accepted that used the same
identifier as a field label and another declaration, depending on the order they
appeared in the source code.
- - - - -
88e3c815 by Simon Peyton Jones at 2020-05-08T15:29:41-04:00
Fix specialisation for DFuns
When specialising a DFun we must take care to saturate the
unfolding. See Note [Specialising DFuns] in Specialise.
Fixes #18120
- - - - -
86c77b36 by Greg Steuck at 2020-05-08T15:29:45-04:00
Remove unused SEGMENT_PROT_RWX
It's been unused for a year and is problematic on any OS which
requires W^X for security.
- - - - -
9d97f4b5 by nineonine at 2020-05-08T15:30:03-04:00
Add test for #16167
- - - - -
aa318338 by Ryan Scott at 2020-05-08T15:30:04-04:00
Bump exceptions submodule so that dist-boot is .gitignore'd
`exceptions` is a stage-0 boot library as of commit
30272412fa437ab8e7a8035db94a278e10513413, which means that building
`exceptions` in a GHC tree will generate a `dist-boot` directory.
However, this directory was not specified in `exceptions`'
`.gitignore` file, which causes it to dirty up the current `git`
working directory.
Accordingly, this bumps the `exceptions` submodule to commit
ghc/packages/exceptions at 23c0b8a50d7592af37ca09beeec16b93080df98f,
which adds `dist-boot` to the `.gitignore` file.
- - - - -
ea86360f by Ömer Sinan Ağacan at 2020-05-08T15:30:30-04:00
Linker.c: initialize n_symbols of ObjectCode with other fields
- - - - -
951c1fb0 by Sylvain Henry at 2020-05-09T21:46:38-04:00
Fix unboxed-sums GC ptr-slot rubbish value (#17791)
This patch allows boot libraries to use unboxed sums without implicitly
depending on `base` package because of `absentSumFieldError`.
See updated Note [aBSENT_SUM_FIELD_ERROR_ID] in GHC.Core.Make
- - - - -
b352d63c by Ben Gamari at 2020-05-09T21:47:14-04:00
rts: Make non-existent linker search path merely a warning
As noted in #18105, previously this resulted in a rather intrusive error
message. This is in contrast to the general expectation that search
paths are merely places to look, not places that must exist.
Fixes #18105.
- - - - -
cf4f1e2f by Ben Gamari at 2020-05-13T02:02:33-04:00
rts/CNF: Fix fixup comparison function
Previously we would implicitly convert the difference between two words
to an int, resulting in an integer overflow on 64-bit machines.
Fixes #16992
- - - - -
a03da9bf by Ömer Sinan Ağacan at 2020-05-13T02:03:16-04:00
Pack some of IdInfo fields into a bit field
This reduces residency of compiler quite a bit on some programs.
Example stats when building T10370:
Before:
2,871,242,832 bytes allocated in the heap
4,693,328,008 bytes copied during GC
33,941,448 bytes maximum residency (276 sample(s))
375,976 bytes maximum slop
83 MiB total memory in use (0 MB lost due to fragmentation)
After:
2,858,897,344 bytes allocated in the heap
4,629,255,440 bytes copied during GC
32,616,624 bytes maximum residency (278 sample(s))
314,400 bytes maximum slop
80 MiB total memory in use (0 MB lost due to fragmentation)
So -3.9% residency, -1.3% bytes copied and -0.4% allocations.
Fixes #17497
Metric Decrease:
T9233
T9675
- - - - -
670c3e5c by Ben Gamari at 2020-05-13T02:03:54-04:00
get-win32-tarballs: Fix base URL
Revert a change previously made for testing purposes.
- - - - -
8ad8dc41 by Ben Gamari at 2020-05-13T02:03:54-04:00
get-win32-tarballs: Improve diagnostics output
- - - - -
8c0740b7 by Simon Jakobi at 2020-05-13T02:04:33-04:00
docs: Add examples for Data.Semigroup.Arg{Min,Max}
Context: #17153
- - - - -
cb22348f by Ben Gamari at 2020-05-13T02:05:11-04:00
Add few cleanups of the CAF logic
Give the NameSet of non-CAFfy names a proper newtype to distinguish it
from all of the other NameSets floating about.
- - - - -
90e38b81 by Emeka Nkurumeh at 2020-05-13T02:05:51-04:00
fix printf warning when using with ghc with clang on mingw
- - - - -
86d8ac22 by Sebastian Graf at 2020-05-13T02:06:29-04:00
CprAnal: Don't attach CPR sigs to expandable bindings (#18154)
Instead, look through expandable unfoldings in `cprTransform`.
See the new Note [CPR for expandable unfoldings]:
```
Long static data structures (whether top-level or not) like
xs = x1 : xs1
xs1 = x2 : xs2
xs2 = x3 : xs3
should not get CPR signatures, because they
* Never get WW'd, so their CPR signature should be irrelevant after analysis
(in fact the signature might even be harmful for that reason)
* Would need to be inlined/expanded to see their constructed product
* Recording CPR on them blows up interface file sizes and is redundant with
their unfolding. In case of Nested CPR, this blow-up can be quadratic!
But we can't just stop giving DataCon application bindings the CPR property,
for example
fac 0 = 1
fac n = n * fac (n-1)
fac certainly has the CPR property and should be WW'd! But FloatOut will
transform the first clause to
lvl = 1
fac 0 = lvl
If lvl doesn't have the CPR property, fac won't either. But lvl doesn't have a
CPR signature to extrapolate into a CPR transformer ('cprTransform'). So
instead we keep on cprAnal'ing through *expandable* unfoldings for these arity
0 bindings via 'cprExpandUnfolding_maybe'.
In practice, GHC generates a lot of (nested) TyCon and KindRep bindings, one
for each data declaration. It's wasteful to attach CPR signatures to each of
them (and intractable in case of Nested CPR).
```
Fixes #18154.
- - - - -
e34bf656 by Ben Gamari at 2020-05-13T02:07:08-04:00
users-guide: Add discussion of shared object naming
Fixes #18074.
- - - - -
5d0f2445 by Ben Gamari at 2020-05-13T02:07:47-04:00
testsuite: Print sign of performance changes
Executes the minor formatting change in the tabulated performance
changes suggested in #18135.
- - - - -
9e4b981f by Ben Gamari at 2020-05-13T02:08:24-04:00
testsuite: Add testcase for #18129
- - - - -
266310c3 by Ivan-Yudin at 2020-05-13T02:09:03-04:00
doc: Reformulate the opening paragraph of Ch. 4 in User's guide
Removes mentioning of Hugs
(it is not helpful for new users anymore).
Changes the wording for the rest of the paragraph.
Fixes #18132.
- - - - -
55e35c0b by Baldur Blöndal at 2020-05-13T20:02:48-04:00
Predicate, Equivalence derive via `.. -> a -> All'
- - - - -
d7e0b57f by Alp Mestanogullari at 2020-05-13T20:03:30-04:00
hadrian: add a --freeze2 option to freeze stage 1 and 2
- - - - -
d880d6b2 by Artem Pelenitsyn at 2020-05-13T20:04:11-04:00
Don't reload environment files on every setSessionDynFlags
Makes `interpretPackageEnv` (which loads envirinment files) a part of
`parseDynamicFlags` (parsing command-line arguments, which is typically
done once) instead of `setSessionDynFlags` (which is typically called
several times). Making several (transitive) calls to `interpretPackageEnv`,
as before, caused #18125 #16318, which should be fixed now.
- - - - -
102cfd67 by Ryan Scott at 2020-05-13T20:04:46-04:00
Factor out HsPatSigType for pat sigs/RULE term sigs (#16762)
This implements chunks (2) and (3) of
https://gitlab.haskell.org/ghc/ghc/issues/16762#note_270170. Namely,
it introduces a dedicated `HsPatSigType` AST type, which represents
the types that can appear in pattern signatures and term-level `RULE`
binders. Previously, these were represented with `LHsSigWcType`.
Although `LHsSigWcType` is isomorphic to `HsPatSigType`, the intended
semantics of the two types are slightly different, as evidenced by
the fact that they have different code paths in the renamer and
typechecker.
See also the new `Note [Pattern signature binders and scoping]` in
`GHC.Hs.Types`.
- - - - -
b17574f7 by Hécate at 2020-05-13T20:05:28-04:00
fix(documentation): Fix the RST links to GHC.Prim
- - - - -
df021fb1 by Baldur Blöndal at 2020-05-13T20:06:06-04:00
Document (->) using inferred quantification for its runtime representations.
Fixes #18142.
- - - - -
1a93ea57 by Takenobu Tani at 2020-05-13T20:06:54-04:00
Tweak man page for ghc command
This commit updates the ghc command's man page as followings:
* Enable `man_show_urls` to show URL addresses in the `DESCRIPTION`
section of ghc.rst, because sphinx currently removes hyperlinks
for man pages.
* Add a `SEE ALSO` section to point to the GHC homepage
- - - - -
a951e1ba by Takenobu Tani at 2020-05-13T20:07:37-04:00
GHCi: Add link to the user's guide in help message
This commit adds a link to the user's guide in ghci's
`:help` message.
Newcomers could easily reach to details of ghci.
- - - - -
404581ea by Jeff Happily at 2020-05-13T20:08:15-04:00
Handle single unused import
- - - - -
1c999e5d by Ben Gamari at 2020-05-13T20:09:07-04:00
Ensure that printMinimalImports closes handle
Fixes #18166.
- - - - -
c9f5a8f4 by Ben Gamari at 2020-05-13T20:09:51-04:00
hadrian: Tell testsuite driver about LLVM availability
This reflects the logic present in the Make build system into Hadrian.
Fixes #18167.
- - - - -
c05c0659 by Simon Jakobi at 2020-05-14T03:31:21-04:00
Improve some folds over Uniq[D]FM
* Replace some non-deterministic lazy folds with
strict folds.
* Replace some O(n log n) folds in deterministic order
with O(n) non-deterministic folds.
* Replace some folds with set-operations on the underlying
IntMaps.
This reduces max residency when compiling
`nofib/spectral/simple/Main.hs` with -O0 by about 1%.
Maximum residency when compiling Cabal also seems reduced on the
order of 3-9%.
- - - - -
477f13bb by Simon Jakobi at 2020-05-14T03:31:58-04:00
Use Data.IntMap.disjoint
Data.IntMap gained a dedicated `disjoint` function in containers-0.6.2.1.
This patch applies this function where appropriate in hopes of modest
compiler performance improvements.
Closes #16806.
- - - - -
e9c0110c by Ben Gamari at 2020-05-14T12:25:53-04:00
IdInfo: Add reference to bitfield-packing ticket
- - - - -
9bd20e83 by Sebastian Graf at 2020-05-15T10:42:09-04:00
DmdAnal: Improve handling of precise exceptions
This patch does two things: Fix possible unsoundness in what was called
the "IO hack" and implement part 2.1 of the "fixing precise exceptions"
plan in
https://gitlab.haskell.org/ghc/ghc/wikis/fixing-precise-exceptions,
which, in combination with !2956, supersedes !3014 and !2525.
**IO hack**
The "IO hack" (which is a fallback to preserve precise exceptions
semantics and thus soundness, rather than some smart thing that
increases precision) is called `exprMayThrowPreciseException` now.
I came up with two testcases exemplifying possible unsoundness (if
twisted enough) in the old approach:
- `T13380d`: Demonstrating unsoundness of the "IO hack" when resorting
to manual state token threading and direct use of primops.
More details below.
- `T13380e`: Demonstrating unsoundness of the "IO hack" when we have
Nested CPR. Not currently relevant, as we don't have Nested
CPR yet.
- `T13380f`: Demonstrating unsoundness of the "IO hack" for safe FFI
calls.
Basically, the IO hack assumed that precise exceptions can only be
thrown from a case scrutinee of type `(# State# RealWorld, _ #)`. I
couldn't come up with a program using the `IO` abstraction that violates
this assumption. But it's easy to do so via manual state token threading
and direct use of primops, see `T13380d`. Also similar code might be
generated by Nested CPR in the (hopefully not too) distant future, see
`T13380e`. Hence, we now have a more careful test in `forcesRealWorld`
that passes `T13380{d,e}` (and will hopefully be robust to Nested CPR).
**Precise exceptions**
In #13380 and #17676 we saw that we didn't preserve precise exception
semantics in demand analysis. We fixed that with minimal changes in
!2956, but that was terribly unprincipled.
That unprincipledness resulted in a loss of precision, which is tracked
by these new test cases:
- `T13380b`: Regression in dead code elimination, because !2956 was too
syntactic about `raiseIO#`
- `T13380c`: No need to apply the "IO hack" when the IO action may not
throw a precise exception (and the existing IO hack doesn't
detect that)
Fixing both issues in !3014 turned out to be too complicated and had
the potential to regress in the future. Hence we decided to only fix
`T13380b` and augment the `Divergence` lattice with a new middle-layer
element, `ExnOrDiv`, which means either `Diverges` (, throws an
imprecise exception) or throws a *precise* exception.
See the wiki page on Step 2.1 for more implementational details:
https://gitlab.haskell.org/ghc/ghc/wikis/fixing-precise-exceptions#dead-code-elimination-for-raiseio-with-isdeadenddiv-introducing-exnordiv-step-21
- - - - -
568d7279 by Ben Gamari at 2020-05-15T10:42:46-04:00
GHC.Cmm.Opt: Handle MO_XX_Conv
This MachOp was introduced by 2c959a1894311e59cd2fd469c1967491c1e488f3
but a wildcard match in cmmMachOpFoldM hid the fact that it wasn't
handled. Ideally we would eliminate the match but this appears to be a
larger task.
Fixes #18141.
- - - - -
5bcf8606 by Ryan Scott at 2020-05-17T08:46:38-04:00
Remove duplicate Note [When to print foralls] in GHC.Core.TyCo.Ppr
There are two different Notes named `[When to print foralls]`. The
most up-to-date one is in `GHC.Iface.Type`, but there is a second
one in `GHC.Core.TyCo.Ppr`. The latter is less up-to-date, as it was
written before GHC switched over to using ifaces to pretty-print
types. I decided to just remove the latter and replace it with a
reference to the former.
[ci skip]
- - - - -
55f0e783 by Fumiaki Kinoshita at 2020-05-21T12:10:44-04:00
base: Add Generic instances to various datatypes under GHC.*
* GHC.Fingerprint.Types: Fingerprint
* GHC.RTS.Flags: GiveGCStats, GCFlags, ConcFlags, DebugFlags, CCFlags, DoHeapProfile, ProfFlags, DoTrace, TraceFlags, TickyFlags, ParFlags and RTSFlags
* GHC.Stats: RTSStats and GCStats
* GHC.ByteOrder: ByteOrder
* GHC.Unicode: GeneralCategory
* GHC.Stack.Types: SrcLoc
Metric Increase:
haddock.base
- - - - -
a9311cd5 by Gert-Jan Bottu at 2020-05-21T12:11:31-04:00
Explicit Specificity
Implementation for Ticket #16393.
Explicit specificity allows users to manually create inferred type variables,
by marking them with braces.
This way, the user determines which variables can be instantiated through
visible type application.
The additional syntax is included in the parser, allowing users to write
braces in type variable binders (type signatures, data constructors etc).
This information is passed along through the renamer and verified in the
type checker.
The AST for type variable binders, data constructors, pattern synonyms,
partial signatures and Template Haskell has been updated to include the
specificity of type variables.
Minor notes:
- Bumps haddock submodule
- Disables pattern match checking in GHC.Iface.Type with GHC 8.8
- - - - -
24e61aad by Ben Price at 2020-05-21T12:12:17-04:00
Lint should say when it is checking a rule
It is rather confusing that when lint finds an error in a rule attached
to a binder, it reports the error as in the RHS, not the rule:
...
In the RHS of foo
We add a clarifying line:
...
In the RHS of foo
In a rule attached to foo
The implication that the rule lives inside the RHS is a bit odd, but
this niggle is already present for unfoldings, whose pattern we are
following.
- - - - -
78c6523c by Ben Gamari at 2020-05-21T12:13:01-04:00
nonmoving: Optimise the write barrier
- - - - -
13f6c9d0 by Andreas Klebinger at 2020-05-21T12:13:45-04:00
Refactor linear reg alloc to remember past assignments.
When assigning registers we now first try registers we
assigned to in the past, instead of picking the "first"
one.
This is in extremely helpful when dealing with loops for
which variables are dead for part of the loop.
This is important for patterns like this:
foo = arg1
loop:
use(foo)
...
foo = getVal()
goto loop;
There we:
* assign foo to the register of arg1.
* use foo, it's dead after this use as it's overwritten after.
* do other things.
* look for a register to put foo in.
If we pick an arbitrary one it might differ from the register the
start of the loop expect's foo to be in.
To fix this we simply look for past register assignments for
the given variable. If we find one and the register is free we
use that register.
This reduces the need for fixup blocks which match the register
assignment between blocks. In the example above between the end
and the head of the loop.
This patch also moves branch weight estimation ahead of register
allocation and adds a flag to control it (cmm-static-pred).
* It means the linear allocator is more likely to assign the hotter
code paths first.
* If it assign these first we are:
+ Less likely to spill on the hot path.
+ Less likely to introduce fixup blocks on the hot path.
These two measure combined are surprisingly effective. Based on nofib
we get in the mean:
* -0.9% instructions executed
* -0.1% reads/writes
* -0.2% code size.
* -0.1% compiler allocations.
* -0.9% compile time.
* -0.8% runtime.
Most of the benefits are simply a result of removing redundant moves
and spills.
Reduced compiler allocations likely are the result of less code being
generated. (The added lookup is mostly non-allocating).
- - - - -
edc2cc58 by Andreas Klebinger at 2020-05-21T12:14:25-04:00
NCG: Codelayout: Distinguish conditional and other branches.
In #18053 we ended up with a suboptimal code layout because
the code layout algorithm didn't distinguish between conditional
and unconditional control flow.
We can completely eliminate unconditional control flow instructions
by placing blocks next to each other, not so much for conditionals.
In terms of implementation we simply give conditional branches less
weight before computing the layout.
Fixes #18053
- - - - -
b7a6b2f4 by Gleb Popov at 2020-05-21T12:15:26-04:00
gitlab-ci: Set locale to C.UTF-8.
- - - - -
a8c27cf6 by Stefan Holdermans at 2020-05-21T12:16:08-04:00
Allow spaces in GHCi :script file names
This patch updates the user interface of GHCi so that file names passed
to the ':script' command may contain spaces escaped with a backslash.
For example:
:script foo\ bar.script
The implementation uses a modified version of 'words' that does not
break on escaped spaces.
Fixes #18027.
- - - - -
82663959 by Stefan Holdermans at 2020-05-21T12:16:08-04:00
Add extra tests for GHCi :script syntax checks
The syntax for GHCi's ":script" command allows for only a single file
name to be passed as an argument. This patch adds a test for the cases
in which a file name is missing or multiple file names are passed.
Related to #T18027.
- - - - -
a0b79e1b by Stefan Holdermans at 2020-05-21T12:16:08-04:00
Allow GHCi :script file names in double quotes
This patch updates the user interface of GHCi so that file names passed
to the ':script' command can be wrapped in double quotes.
For example:
:script "foo bar.script"
The implementation uses a modified version of 'words' that treats
character sequences enclosed in double quotes as single words.
Fixes #18027.
- - - - -
cf566330 by Stefan Holdermans at 2020-05-21T12:16:08-04:00
Update documentation for GHCi :script
This patch adds the fixes that allow for file names containing spaces to
be passed to GHCi's ':script' command to the release notes for 8.12 and
expands the user-guide documentation for ':script' by mentioning how
such file names can be passed.
Related to #18027.
- - - - -
0004ccb8 by Tuan Le at 2020-05-21T12:16:46-04:00
llvmGen: Consider Relocatable read-only data as not constantReferences: #18137
- - - - -
964d3ea2 by John Ericson at 2020-05-21T12:17:30-04:00
Use `Checker` for `tc_pat`
- - - - -
b797aa42 by John Ericson at 2020-05-21T12:17:30-04:00
Use `Checker` for `tc_lpat` and `tc_lpats`
- - - - -
5108e84a by John Ericson at 2020-05-21T12:17:30-04:00
More judiciously panic in `ts_pat`
- - - - -
510e0451 by John Ericson at 2020-05-21T12:17:30-04:00
Put `PatEnv` first in `GHC.Tc.Gen.Pat.Checker`
- - - - -
cb4231db by John Ericson at 2020-05-21T12:17:30-04:00
Tiny cleaup eta-reduce away a function argument
In GHC, not in the code being compiled!
- - - - -
6890c38d by John Ericson at 2020-05-21T12:17:30-04:00
Use braces with do in `SplicePat` case for consistency
- - - - -
3451584f by buggymcbugfix at 2020-05-21T12:18:06-04:00
Fix spelling mistakes and typos
- - - - -
b552e531 by buggymcbugfix at 2020-05-21T12:18:06-04:00
Add INLINABLE pragmas to Enum list producers
The INLINABLE pragmas ensure that we export stable (unoptimised) unfoldings in
the interface file so we can do list fusion at usage sites.
Related tickets: #15185, #8763, #18178.
- - - - -
e7480063 by buggymcbugfix at 2020-05-21T12:18:06-04:00
Piggyback on Enum Word methods for Word64
If we are on a 64 bit platform, we can use the efficient Enum Word
methods for the Enum Word64 instance.
- - - - -
892b0c41 by buggymcbugfix at 2020-05-21T12:18:06-04:00
Document INLINE(ABLE) pragmas that enable fusion
- - - - -
2b363ebb by Richard Eisenberg at 2020-05-21T12:18:45-04:00
MR template should ask for key part
- - - - -
a95bbd0b by Sebastian Graf at 2020-05-21T12:19:37-04:00
Make `Int`'s `mod` and `rem` strict in their first arguments
They used to be strict until 4d2ac2d (9 years ago).
It's obviously better to be strict for performance reasons.
It also blocks #18067.
NoFib results:
```
--------------------------------------------------------------------------------
Program Allocs Instrs
--------------------------------------------------------------------------------
integer -1.1% +0.4%
wheel-sieve2 +21.2% +20.7%
--------------------------------------------------------------------------------
Min -1.1% -0.0%
Max +21.2% +20.7%
Geometric Mean +0.2% +0.2%
```
The regression in `wheel-sieve2` is due to reboxing that likely will go
away with the resolution of #18067. See !3282 for details.
Fixes #18187.
- - - - -
d3d055b8 by Galen Huntington at 2020-05-21T12:20:18-04:00
Clarify pitfalls of NegativeLiterals; see #18022.
- - - - -
1b508a9e by Alexey Kuleshevich at 2020-05-21T12:21:02-04:00
Fix wording in primops documentation to reflect the correct reasoning:
* Besides resizing functions, shrinking ones also mutate the
size of a mutable array and because of those two `sizeofMutabeByteArray`
and `sizeofSmallMutableArray` are now deprecated
* Change reference in documentation to the newer functions `getSizeof*`
instead of `sizeof*` for shrinking functions
* Fix incorrect mention of "byte" instead of "small"
- - - - -
4ca0c8a1 by Andreas Klebinger at 2020-05-21T12:21:53-04:00
Don't variable-length encode magic iface constant.
We changed to use variable length encodings for many types by default,
including Word32. This makes sense for numbers but not when Word32 is
meant to represent four bytes.
I added a FixedLengthEncoding newtype to Binary who's instances
interpret their argument as a collection of bytes instead of a number.
We then use this when writing/reading magic numbers to the iface file.
I also took the libery to remove the dummy iface field.
This fixes #18180.
- - - - -
a1275081 by Krzysztof Gogolewski at 2020-05-21T12:22:35-04:00
Add a regression test for #11506
The testcase works now.
See explanation in https://gitlab.haskell.org/ghc/ghc/issues/11506#note_273202
- - - - -
8a816e5f by Krzysztof Gogolewski at 2020-05-21T12:23:55-04:00
Sort deterministically metric output
Previously, we sorted according to the test name and way,
but the metrics (max_bytes_used/peak_megabytes_allocated etc.)
were appearing in nondeterministic order.
- - - - -
566cc73f by Sylvain Henry at 2020-05-21T12:24:45-04:00
Move isDynLinkName into GHC.Types.Name
It doesn't belong into GHC.Unit.State
- - - - -
d830bbc9 by Adam Sandberg Ericsson at 2020-05-23T13:36:20-04:00
docs: fix formatting and add some links
[skip ci]
- - - - -
49301ad6 by Andrew Martin at 2020-05-23T13:37:01-04:00
Implement cstringLength# and FinalPtr
This function and its accompanying rule resolve issue #5218.
A future PR to the bytestring library will make the internal
Data.ByteString.Internal.unsafePackAddress compute string length
with cstringLength#. This will improve the status quo because it is
eligible for constant folding.
Additionally, introduce a new data constructor to ForeignPtrContents
named FinalPtr. This additional data constructor, when used in the
IsString instance for ByteString, leads to more Core-to-Core
optimization opportunities, fewer runtime allocations, and smaller
binaries.
Also, this commit re-exports all the functions from GHC.CString
(including cstringLength#) in GHC.Exts. It also adds a new test
driver. This test driver is used to perform substring matches on Core
that is dumped after all the simplifier passes. In this commit, it is
used to check that constant folding of cstringLength# works.
- - - - -
dcd6bdcc by Ben Gamari at 2020-05-23T13:37:48-04:00
simplCore: Ignore ticks in rule templates
This fixes #17619, where a tick snuck in to the template of a rule,
resulting in a panic during rule matching. The tick in question was
introduced via post-inlining, as discussed in `Note [Simplifying
rules]`. The solution we decided upon was to simply ignore ticks in the
rule template, as discussed in `Note [Tick annotations in RULE
matching]`.
Fixes #18162.
Fixes #17619.
- - - - -
82cb8913 by John Ericson at 2020-05-23T13:38:32-04:00
Fix #18145 and also avoid needless work with implicit vars
- `forAllOrNothing` now is monadic, so we can trace whether we bind
an explicit `forall` or not.
- #18145 arose because the free vars calculation was needlessly
complex. It is now greatly simplified.
- Replaced some other implicit var code with `filterFreeVarsToBind`.
Co-authored-by: Ryan Scott <ryan.gl.scott at gmail.com>
- - - - -
a60dc835 by Ben Gamari at 2020-05-23T13:39:12-04:00
Bump process submodule
Fixes #17926.
- - - - -
856adf54 by Ben Gamari at 2020-05-23T13:40:21-04:00
users-guide: Clarify meaning of -haddock flag
Fixes #18206.
- - - - -
7ae57afd by Ben Gamari at 2020-05-23T13:41:03-04:00
git: Add ignored commits file
This can be used to tell git to ignore bulk renaming commits like the
recently-finished module hierarchy refactoring. Configured with,
git config blame.ignoreRevsFile .git-ignore-revs
- - - - -
63d30e60 by jneira at 2020-05-24T01:54:42-04:00
Add hie-bios script for windows systems
It is a direct translation of the sh script
- - - - -
59182b88 by jneira at 2020-05-24T01:54:42-04:00
Honour previous values for CABAL and CABFLAGS
The immediate goal is let the hie-bios.bat script
set CABFLAGS with `-v0` and remove all cabal output
except the compiler arguments
- - - - -
932dc54e by jneira at 2020-05-24T01:54:42-04:00
Add specific configuration for windows in hie.yaml
- - - - -
e0eda070 by jneira at 2020-05-24T01:54:42-04:00
Remove not needed hie-bios output
- - - - -
a0ea59d6 by Sylvain Henry at 2020-05-24T01:55:24-04:00
Move Config module into GHC.Settings
- - - - -
37430251 by Sylvain Henry at 2020-05-24T01:55:24-04:00
Rename GHC.Core.Arity into GHC.Core.Opt.Arity
- - - - -
a426abb9 by Sylvain Henry at 2020-05-24T01:55:24-04:00
Rename GHC.Hs.Types into GHC.Hs.Type
See discussion in https://gitlab.haskell.org/ghc/ghc/issues/13009#note_268610
- - - - -
1c91a7a0 by Sylvain Henry at 2020-05-24T01:55:24-04:00
Bump haddock submodule
- - - - -
66bd24d1 by Ryan Scott at 2020-05-24T01:56:03-04:00
Add orderingTyCon to wiredInTyCons (#18185)
`Ordering` needs to be wired in for use in the built-in `CmpNat` and
`CmpSymbol` type families, but somehow it was never added to the list
of `wiredInTyCons`, leading to the various oddities observed
in #18185. Easily fixed by moving `orderingTyCon` from
`basicKnownKeyNames` to `wiredInTyCons`.
Fixes #18185.
- - - - -
01c43634 by Matthew Pickering at 2020-05-24T01:56:42-04:00
Remove unused hs-boot file
- - - - -
7a07aa71 by Sylvain Henry at 2020-05-24T15:22:17-04:00
Hadrian: fix cross-compiler build (#16051)
- - - - -
15ccca16 by Sylvain Henry at 2020-05-24T15:22:17-04:00
Hadrian: fix distDir per stage
- - - - -
b420fb24 by Sylvain Henry at 2020-05-24T15:22:17-04:00
Hadrian: fix hp2ps error during cross-compilation
Fixed by @alp (see https://gitlab.haskell.org/ghc/ghc/issues/16051#note_274265)
- - - - -
cd339ef0 by Joshua Price at 2020-05-24T15:22:56-04:00
Make Unicode brackets opening/closing tokens (#18225)
The tokens `[|`, `|]`, `(|`, and `|)` are opening/closing tokens as
described in GHC Proposal #229. This commit makes the unicode
variants (`⟦`, `⟧`, `⦇`, and `⦈`) act the same as their ASCII
counterparts.
- - - - -
013d7120 by Ben Gamari at 2020-05-25T09:48:17-04:00
Revert "Specify kind variables for inferred kinds in base."
As noted in !3132, this has rather severe knock-on consequences in
user-code. We'll need to revisit this before merging something along
these lines.
This reverts commit 9749fe1223d182b1f8e7e4f7378df661c509f396.
- - - - -
4c4312ed by Ben Gamari at 2020-05-25T09:48:53-04:00
Coverage: Drop redundant ad-hoc boot module check
To determine whether the module is a boot module
Coverage.addTicksToBinds was checking for a `boot` suffix in the module
source filename. This is quite ad-hoc and shouldn't be necessary; the
callsite in `deSugar` already checks that the module isn't a boot
module.
- - - - -
1abf3c84 by Ben Gamari at 2020-05-25T09:48:53-04:00
Coverage: Make tickBoxCount strict
This could otherwise easily cause a leak of (+) thunks.
- - - - -
b2813750 by Ben Gamari at 2020-05-25T09:48:53-04:00
Coverage: Make ccIndices strict
This just seems like a good idea.
- - - - -
02e278eb by Ben Gamari at 2020-05-25T09:48:53-04:00
Coverage: Don't produce ModBreaks if not HscInterpreted
emptyModBreaks contains a bottom and consequently it's important that we
don't use it unless necessary.
- - - - -
b8c014ce by Ben Gamari at 2020-05-25T09:48:53-04:00
Coverage: Factor out addMixEntry
- - - - -
53814a64 by Zubin Duggal at 2020-05-26T03:03:24-04:00
Add info about typeclass evidence to .hie files
See `testsuite/tests/hiefile/should_run/HieQueries.hs` and
`testsuite/tests/hiefile/should_run/HieQueries.stdout` for an example of this
We add two new fields, `EvidenceVarBind` and `EvidenceVarUse` to the
`ContextInfo` associated with an Identifier. These are associated with the
appropriate identifiers for the evidence variables collected when we come across
`HsWrappers`, `TcEvBinds` and `IPBinds` while traversing the AST.
Instance dictionary and superclass selector dictionaries from `tcg_insts` and
classes defined in `tcg_tcs` are also recorded in the AST as originating from
their definition span
This allows us to save a complete picture of the evidence constructed by the
constraint solver, and will let us report this to the user, enabling features
like going to the instance definition from the invocation of a class method(or
any other method taking a constraint) and finding all usages of a particular
instance.
Additionally,
- Mark NodeInfo with an origin so we can differentiate between bindings
origininating in the source vs those in ghc
- Along with typeclass evidence info, also include information on Implicit
Parameters
- Add a few utility functions to HieUtils in order to query the new info
Updates haddock submodule
- - - - -
6604906c by Sebastian Graf at 2020-05-26T03:04:04-04:00
Make WorkWrap.Lib.isWorkerSmallEnough aware of the old arity
We should allow a wrapper with up to 82 parameters when the original
function had 82 parameters to begin with.
I verified that this made no difference on NoFib, but then again
it doesn't use huge records...
Fixes #18122.
- - - - -
cf772f19 by Sylvain Henry at 2020-05-26T03:04:45-04:00
Enhance Note [About units] for Backpack
- - - - -
ede24126 by Takenobu Tani at 2020-05-27T00:13:55-04:00
core-spec: Modify file paths according to new module hierarchy
This patch updates file paths according to new module hierarchy [1]:
* GHC/Core.hs <= coreSyn/CoreSyn.hs
* GHC/Core/Coercion.hs <= types/Coercion.hs
* GHC/Core/Coercion/Axiom.hs <= types/CoAxiom.hs
* GHC/Core/Coercion/Opt.hs <= types/OptCoercion.hs
* GHC/Core/DataCon.hs <= basicTypes/DataCon.hs
* GHC/Core/FamInstEnv.hs <= types/FamInstEnv.hs
* GHC/Core/Lint.hs <= coreSyn/CoreLint.hs
* GHC/Core/Subst.hs <= coreSyn/CoreSubst.hs
* GHC/Core/TyCo/Rep.hs <= types/TyCoRep.hs
* GHC/Core/TyCon.hs <= types/TyCon.hs
* GHC/Core/Type.hs <= types/Type.hs
* GHC/Core/Unify.hs <= types/Unify.hs
* GHC/Types/Literal.hs <= basicTypes/Literal.hs
* GHC/Types/Var.hs <= basicTypes/Var.hs
[1]: https://gitlab.haskell.org/ghc/ghc/-/wikis/Make-GHC-codebase-more-modular
[skip ci]
- - - - -
04750304 by Ben Gamari at 2020-05-27T00:14:33-04:00
eventlog: Fix racy flushing
Previously no attempt was made to avoid multiple threads writing their
capability-local eventlog buffers to the eventlog writer simultaneously.
This could result in multiple eventlog streams being interleaved. Fix
this by documenting that the EventLogWriter's write() and flush()
functions may be called reentrantly and fix the default writer to
protect its FILE* by a mutex.
Fixes #18210.
- - - - -
d6203f24 by Joshua Price at 2020-05-27T00:15:17-04:00
Make `identifier` parse unparenthesized `->` (#18060)
- - - - -
28deee28 by Ben Gamari at 2020-05-28T16:23:21-04:00
GHC.Core.Unfold: Refactor traceInline
This reduces duplication as well as fixes a bug wherein -dinlining-check
would override -ddump-inlinings. Moreover, the new variant
- - - - -
1f393e1e by Ben Gamari at 2020-05-28T16:23:21-04:00
Avoid unnecessary allocations due to tracing utilities
While ticky-profiling the typechecker I noticed that hundreds of
millions of SDocs are being allocated just in case -ddump-*-trace is
enabled. This is awful.
We avoid this by ensuring that the dump flag check is inlined into the
call site, ensuring that the tracing document needn't be allocated
unless it's actually needed.
See Note [INLINE conditional tracing utilities] for details.
Fixes #18168.
Metric Decrease:
T9961
haddock.Cabal
haddock.base
haddock.compiler
- - - - -
5f621a78 by Vladislav Zavialov at 2020-05-28T16:23:58-04:00
Add Semigroup/Monoid for Q (#18123)
- - - - -
dc5f004c by Xavier Denis at 2020-05-28T16:24:37-04:00
Fix #18071
Run the core linter on candidate instances to ensure they are
well-kinded.
Better handle quantified constraints by using a CtWanted to avoid
having unsolved constraints thrown away at the end by the solver.
- - - - -
10e6982c by Sebastian Graf at 2020-05-28T16:25:14-04:00
FloatOut: Only eta-expand dead-end RHS if arity will increase (#18231)
Otherwise we risk turning trivial RHS into non-trivial RHS, introducing
unnecessary bindings in the next Simplifier run, resulting in more
churn.
Fixes #18231.
- - - - -
08dab5f7 by Sebastian Graf at 2020-05-28T16:25:14-04:00
DmdAnal: Recognise precise exceptions from case alternatives (#18086)
Consider
```hs
m :: IO ()
m = do
putStrLn "foo"
error "bar"
```
`m` (from #18086) always throws a (precise or imprecise) exception or
diverges. Yet demand analysis infers `<L,A>` as demand signature instead
of `<L,A>x` for it.
That's because the demand analyser sees `putStrLn` occuring in a case
scrutinee and decides that it has to `deferAfterPreciseException`,
because `putStrLn` throws a precise exception on some control flow
paths. This will mask the `botDiv` `Divergence`of the single case alt
containing `error` to `topDiv`. Since `putStrLn` has `topDiv` itself,
the final `Divergence` is `topDiv`.
This is easily fixed: `deferAfterPreciseException` works by `lub`ing
with the demand type of a virtual case branch denoting the precise
exceptional control flow. We used `nopDmdType` before, but we can be
more precise and use `exnDmdType`, which is `nopDmdType` with `exnDiv`.
Now the `Divergence` from the case alt will degrade `botDiv` to `exnDiv`
instead of `topDiv`, which combines with the result from the scrutinee
to `exnDiv`, and all is well.
Fixes #18086.
- - - - -
aef95f11 by Ben Gamari at 2020-05-28T16:25:53-04:00
Ticky-ticky: Record DataCon name in ticker name
This makes it significantly easier to spot the nature of
allocations regressions and comes at a reasonably low cost.
- - - - -
8f021b8c by Ben Gamari at 2020-05-28T16:26:34-04:00
hadrian: Don't track GHC's verbosity argument
Teach hadrian to ignore GHC's -v argument in its recompilation check,
thus fixing #18131.
- - - - -
13d9380b by Ben Gamari at 2020-05-28T16:27:20-04:00
Rip out CmmStackInfo(updfr_space)
As noted in #18232, this field is currently completely unused and
moreover doesn't have a clear meaning.
- - - - -
f10d11fa by Andreas Klebinger at 2020-05-29T01:38:42-04:00
Fix "build/elem" RULE.
An redundant constraint prevented the rule from matching.
Fixing this allows a call to elem on a known list to be translated
into a series of equality checks, and eventually a simple case
expression.
Surprisingly this seems to regress elem for strings. To avoid
this we now also allow foldrCString to inline and add an UTF8
variant. This results in elem being compiled to a tight
non-allocating loop over the primitive string literal which
performs a linear search.
In the process this commit adds UTF8 variants for some of the
functions in GHC.CString. This is required to make this work for
both ASCII and UTF8 strings.
There are also small tweaks to the CString related rules.
We now allow ourselfes the luxury to compare the folding function
via eqExpr, which helps to ensure the rule fires before we inline
foldrCString*. Together with a few changes to allow matching on both
the UTF8 and ASCII variants of the CString functions.
- - - - -
bbeb2389 by Ben Gamari at 2020-05-29T01:39:19-04:00
CoreToStg: Add Outputable ArgInfo instance
- - - - -
0e3361ca by Simon Peyton Jones at 2020-05-29T01:39:19-04:00
Make Lint check return type of a join point
Consider
join x = rhs in body
It's important that the type of 'rhs' is the same as the type of
'body', but Lint wasn't checking that invariant.
Now it does! This was exposed by investigation into !3113.
- - - - -
c49f7df0 by Simon Peyton Jones at 2020-05-29T01:39:19-04:00
Do not float join points in exprIsConApp_maybe
We hvae been making exprIsConApp_maybe cleverer in recent times:
commit b78cc64e923716ac0512c299f42d4d0012306c05
Date: Thu Nov 15 17:14:31 2018 +0100
Make constructor wrappers inline only during the final phase
commit 7833cf407d1f608bebb1d38bb99d3035d8d735e6
Date: Thu Jan 24 17:58:50 2019 +0100
Look through newtype wrappers (Trac #16254)
commit c25b135ff5b9c69a90df0ccf51b04952c2dc6ee1
Date: Thu Feb 21 12:03:22 2019 +0000
Fix exprIsConApp_maybe
But alas there was still a bug, now immortalised in
Note [Don't float join points]
in SimpleOpt.
It's quite hard to trigger because it requires a dead
join point, but it came up when compiling Cabal
Cabal.Distribution.Fields.Lexer.hs, when working on
!3113.
Happily, the fix is extremly easy. Finding the
bug was not so easy.
- - - - -
46720997 by Ben Gamari at 2020-05-29T01:39:19-04:00
Allow simplification through runRW#
Because runRW# inlines so late, we were previously able to do very
little simplification across it. For instance, given even a simple
program like
case runRW# (\s -> let n = I# 42# in n) of
I# n# -> f n#
we previously had no way to avoid the allocation of the I#.
This patch allows the simplifier to push strict contexts into the
continuation of a runRW# application, as explained in
in Note [Simplification of runRW#] in GHC.CoreToStg.Prep.
Fixes #15127.
Metric Increase:
T9961
Metric Decrease:
ManyConstructors
Co-Authored-By: Simon Peyton-Jone <simonpj at microsoft.com>
- - - - -
277c2f26 by Ben Gamari at 2020-05-29T01:39:55-04:00
Eta expand un-saturated primops
Now since we no longer try to predict CAFfyness we have no need for the
solution to #16846. Eta expanding unsaturated primop applications is
conceptually simpler, especially in the presence of levity polymorphism.
This essentially reverts cac8dc9f51e31e4c0a6cd9bc302f7e1bc7c03beb,
as suggested in #18079.
Closes #18079.
- - - - -
f44d7ae0 by Simon Jakobi at 2020-05-29T01:40:34-04:00
base: Scrap deprecation plan for Data.Monoid.{First,Last}
See the discussion on the libraries mailing list for context:
https://mail.haskell.org/pipermail/libraries/2020-April/030357.html
- - - - -
8b494895 by Jeremy Schlatter at 2020-05-29T01:41:12-04:00
Fix typo in documentation
- - - - -
998450f4 by Gleb Popov at 2020-05-29T01:41:53-04:00
Always define USE_PTHREAD_FOR_ITIMER for FreeBSD.
- - - - -
f9a513e0 by Alp Mestanogullari at 2020-05-29T01:42:36-04:00
hadrian: introduce 'install' target
Its logic is very simple. It `need`s the `binary-dist-dir` target
and runs suitable `configure` and `make install` commands for the
user. A new `--prefix` command line argument is introduced to
specify where GHC should be installed.
- - - - -
67738db1 by Travis Whitaker at 2020-05-29T13:34:48-04:00
Build a threaded stage 1 if the bootstrapping GHC supports it.
- - - - -
aac19e6c by Peter Trommler at 2020-05-29T13:35:24-04:00
PPC NCG: No per-symbol .section ".toc" directives
All position independent symbols are collected during code generation
and emitted in one go. Prepending each symbol with a .section ".toc"
directive is redundant. This patch drops the per-symbol directives
leading to smaller assembler files.
Fixes #18250
- - - - -
4413828b by Ben Gamari at 2020-05-30T06:07:31-04:00
rts: Teach getNumProcessors to return available processors
Previously we would report the number of physical processors, which
can be quite wrong in a containerized setting. Now we rather return how
many processors are in our affinity mask when possible.
I also refactored the code to prefer platform-specific since this will
report logical CPUs instead of physical (using
`machdep.cpu.thread_count` on Darwin and `cpuset_getaffinity` on FreeBSD).
Fixes #14781.
- - - - -
1449435c by Ben Gamari at 2020-05-30T06:07:31-04:00
users-guide: Note change in getNumProcessors in users guide
- - - - -
3d960169 by Ben Gamari at 2020-05-30T06:07:31-04:00
rts: Drop compatibility shims for Windows Vista
We can now assume that the thread and processor group interfaces are
available.
- - - - -
7f8f948c by Peter Trommler at 2020-05-30T06:08:07-04:00
PPC NCG: Fix .size directive on powerpc64 ELF v1
Thanks to Sergei Trofimovich for pointing out the issue.
Fixes #18237
- - - - -
7c555b05 by Andreas Klebinger at 2020-05-30T06:08:43-04:00
Optimize GHC.Utils.Monad.
Many functions in this module are recursive and as such are marked
loop breakers. Which means they are unlikely to get an unfolding.
This is *bad*. We always want to specialize them to specific Monads.
Which requires a visible unfolding at the use site.
I rewrote the recursive ones from:
foo f x = ... foo x' ...
to
foo f x = go x
where
go x = ...
As well as giving some pragmas to make all of them available
for specialization.
The end result is a reduction of allocations of about -1.4% for
nofib/spectral/simple/Main.hs when compiled with `-O`.
-------------------------
Metric Decrease:
T12425
T14683
T5631
T9233
T9675
T9961
WWRec
-------------------------
- - - - -
8b1cb5df by Ben Gamari at 2020-05-30T06:09:20-04:00
Windows: Bump Windows toolchain to 0.2
- - - - -
6947231a by Zubin Duggal at 2020-05-30T06:10:02-04:00
Simplify contexts in GHC.Iface.Ext.Ast
- - - - -
2ee4f36c by Daniel Gröber at 2020-06-01T06:32:56-04:00
Cleanup OVERWRITING_CLOSURE logic
The code is just more confusing than it needs to be. We don't need to mix
the threaded check with the ldv profiling check since ldv's init already
checks for this. Hence they can be two separate checks. Taking the sanity
checking into account is also cleaner via DebugFlags.sanity. No need for
checking the DEBUG define.
The ZERO_SLOP_FOR_LDV_PROF and ZERO_SLOP_FOR_SANITY_CHECK definitions the
old code had also make things a lot more opaque IMO so I removed those.
- - - - -
6159559b by Daniel Gröber at 2020-06-01T06:32:56-04:00
Fix OVERWRITING_CLOSURE assuming closures are not inherently used
The new ASSERT in LDV_recordDead() was being tripped up by MVars when
removeFromMVarBlockedQueue() calls OVERWRITING_CLOSURE() via
OVERWRITE_INFO().
- - - - -
38992085 by Daniel Gröber at 2020-06-01T06:32:56-04:00
Always zero shrunk mutable array slop when profiling
When shrinking arrays in the profiling way we currently don't always zero
the leftover slop. This means we can't traverse such closures in the heap
profiler. The old Note [zeroing slop] and #8402 have some rationale for why
this is so but I belive the reasoning doesn't apply to mutable
closures. There users already have to ensure multiple threads don't step on
each other's toes so zeroing should be safe.
- - - - -
b0c1f2a6 by Ben Gamari at 2020-06-01T06:33:37-04:00
testsuite: Add test for #18151
- - - - -
9a99a178 by Ben Gamari at 2020-06-01T06:33:37-04:00
testsuite: Add test for desugaring of PostfixOperators
- - - - -
2b89ca5b by Ben Gamari at 2020-06-01T06:33:37-04:00
HsToCore: Eta expand left sections
Strangely, the comment next to this code already alluded to the fact
that even simply eta-expanding will sacrifice laziness. It's quite
unclear how we regressed so far.
See #18151.
- - - - -
d412d7a3 by Kirill Elagin at 2020-06-01T06:34:21-04:00
Winferred-safe-imports: Do not exit with error
Currently, when -Winferred-safe-imports is enabled, even when it is not
turned into an error, the compiler will still exit with exit code 1 if
this warning was emitted.
Make sure it is really treated as a warning.
- - - - -
f945eea5 by Ben Gamari at 2020-06-01T06:34:58-04:00
nonmoving: Optimise log2_ceil
- - - - -
aab606e4 by Bodigrim at 2020-06-01T06:35:36-04:00
Clarify description of fromListN
- - - - -
7e5220e2 by Bodigrim at 2020-06-01T06:35:36-04:00
Apply suggestion to libraries/base/GHC/Exts.hs
- - - - -
f3fb1ce9 by fendor at 2020-06-01T06:36:18-04:00
Add `isInScope` check to `lintCoercion`
Mirrors the behaviour of `lintType`.
- - - - -
5ac4d946 by fendor at 2020-06-01T06:36:18-04:00
Lint rhs of IfaceRule
- - - - -
1cef6126 by Jeremy Schlatter at 2020-06-01T06:37:00-04:00
Fix wording in documentation
The duplicate "orphan instance" phrase here doesn't make sense, and was
probably an accident.
- - - - -
5aaf08f2 by Takenobu Tani at 2020-06-01T06:37:43-04:00
configure: Modify aclocal.m4 according to new module hierarchy
This patch updates file paths according to new module hierarchy [1]:
* Rename:
* compiler/GHC/Parser.hs <= compiler/parser/Parser.hs
* compiler/GHC/Parser/Lexer.hs <= compiler/Parser/Lexer.hs
* Add:
* compiler/GHC/Cmm/Lexer.hs
[1]: https://gitlab.haskell.org/ghc/ghc/-/wikis/Make-GHC-codebase-more-modular
- - - - -
15857ad8 by Ben Gamari at 2020-06-01T06:38:26-04:00
testsuite: Don't fail if we can't unlink __symlink_test
Afterall, it's possible we were unable to create it due to lack of
symlink permission.
- - - - -
4a7229ef by Ben Gamari at 2020-06-01T06:38:26-04:00
testsuite: Refactor ghostscript detection
Tamar reported that he saw crashes due to unhandled exceptions.
- - - - -
2ab37eaf by Ben Gamari at 2020-06-01T06:38:26-04:00
testsuite/perf_notes: Fix ill-typed assignments
- - - - -
e45d5b66 by Ben Gamari at 2020-06-01T06:38:26-04:00
testsuite/testutil: Fix bytes/str mismatch
- - - - -
7002d0cb by Ben Gamari at 2020-06-01T06:38:26-04:00
testsuite: Work around spurious mypy failure
- - - - -
11390e3a by Takenobu Tani at 2020-06-01T06:39:05-04:00
Clean up file paths for new module hierarchy
This updates comments only.
This patch replaces file references according to new module hierarchy.
See also:
* https://gitlab.haskell.org/ghc/ghc/-/wikis/Make-GHC-codebase-more-modular
* https://gitlab.haskell.org/ghc/ghc/issues/13009
- - - - -
8f2e5732 by Takenobu Tani at 2020-06-01T06:39:05-04:00
Modify file paths to module paths for new module hierarchy
This updates comments only.
This patch replaces module references according to new module
hierarchy [1][2].
For files under the `compiler/` directory, I replace them as
module paths instead of file paths. For instance,
`GHC.Unit.State` instead of `compiler/GHC/Unit/State.hs` [3].
For current and future haddock's markup, this patch encloses
the module name with "" [4].
[1]: https://gitlab.haskell.org/ghc/ghc/-/wikis/Make-GHC-codebase-more-modular
[2]: https://gitlab.haskell.org/ghc/ghc/issues/13009
[3]: https://gitlab.haskell.org/ghc/ghc/-/merge_requests/3375#note_276613
[4]: https://haskell-haddock.readthedocs.io/en/latest/markup.html#linking-to-modules
- - - - -
68b71c4a by Tom Ellis at 2020-06-01T06:39:55-04:00
Rename the singleton tuple GHC.Tuple.Unit to GHC.Tuple.Solo
- - - - -
95da76c2 by Sylvain Henry at 2020-06-01T06:40:41-04:00
Hadrian: fix binary-dist target for cross-compilation
- - - - -
730fcd54 by Vladislav Zavialov at 2020-06-01T06:41:18-04:00
Improve parser error messages for the @-operator
Since GHC diverges from the Haskell Report by allowing the user
to define (@) as an infix operator, we better give a good
error message when the user does so unintentionally.
In general, this is rather hard to do, as some failures will be
discovered only in the renamer or the type checker:
x :: (Integer, Integer)
x @ (a, b) = (1, 2)
This patch does *not* address this general case.
However, it gives much better error messages when the binding
is not syntactically valid:
pairs xs @ (_:xs') = zip xs xs'
Before this patch, the error message was rather puzzling:
<interactive>:1:1: error: Parse error in pattern: pairs
After this patch, the error message includes a hint:
<interactive>:1:1: error:
Parse error in pattern: pairs
In a function binding for the ‘@’ operator.
Perhaps you meant an as-pattern, which must not be surrounded by whitespace
- - - - -
0fde5377 by Vladislav Zavialov at 2020-06-01T06:41:18-04:00
Improve parser error messages for TypeApplications
With this patch, we always parse f @t as a type application,
thereby producing better error messages.
This steals two syntactic forms:
* Prefix form of the @-operator in expressions. Since the @-operator is
a divergence from the Haskell Report anyway, this is not a major loss.
* Prefix form of @-patterns. Since we are stealing loose infix form
anyway, might as well sacrifice the prefix form for the sake of much
better error messages.
- - - - -
c68e7e1e by Vladislav Zavialov at 2020-06-01T06:41:18-04:00
Improve parser error messages for TemplateHaskellQuotes
While [e| |], [t| |], [d| |], and so on, steal syntax from list
comprehensions, [| |] and [|| ||] do not steal any syntax.
Thus we can improve error messages by always accepting them in the
lexer. Turns out the renamer already performs necessary validation.
- - - - -
120aedbd by Ben Gamari at 2020-06-01T16:07:02-04:00
gitlab-ci: Disable use of ld.lld on ARMv7
It turns out that lld non-deterministically fails on ARMv7. I suspect
this may be due to the a kernel regression as this only started
happening when we upgraded to 5.4. Nevertheless, easily avoided by
simply sticking with gold.
Works around #18280.
- - - - -
d6279ff0 by Ben Gamari at 2020-06-02T13:03:30-04:00
gitlab-ci: Ensure that workaround for #18280 applies to bindisttest
We need to ensure that the `configure` flags working around #18280 are
propagated to the bindisttest `configure` as well.
- - - - -
cb5c31b5 by Ben Gamari at 2020-06-03T17:55:04-04:00
gitlab-ci: Allow ARMv7 job to fail
Due to #18298.
- - - - -
32a4ae90 by John Ericson at 2020-06-04T04:34:42-04:00
Clean up boot vs non-boot disambiguating types
We often have (ModuleName, Bool) or (Module, Bool) pairs for "extended"
module names (without or with a unit id) disambiguating boot and normal
modules. We think this is important enough across the compiler that it
deserves a new nominal product type. We do this with synnoyms and a
functor named with a `Gen` prefix, matching other newly created
definitions.
It was also requested that we keep custom `IsBoot` / `NotBoot` sum type.
So we have it too. This means changing many the many bools to use that
instead.
Updates `haddock` submodule.
- - - - -
c05756cd by Niklas Hambüchen at 2020-06-04T04:35:24-04:00
docs: Add more details on InterruptibleFFI.
Details from https://gitlab.haskell.org/ghc/ghc/issues/8684
and https://github.com/takano-akio/filelock/pull/7#discussion_r280332430
- - - - -
1b975aed by Andrew Martin at 2020-06-04T04:36:03-04:00
Allow finalizeForeignPtr to be called on FinalPtr/PlainPtr.
MR 2165 (commit 49301ad6226d9a83d110bee8c419615dd94f5ded) regressed
finalizeForeignPtr by throwing exceptions when PlainPtr was encounterd.
This regression did not make it into a release of GHC. Here, the
original behavior is restored, and FinalPtr is given the same treatment
as PlainPtr.
- - - - -
2bd3929a by Luke Lau at 2020-06-04T04:36:41-04:00
Fix documentation on type families not being extracted
It looks like the location of the Names used for CoAxioms on type
families are now located at their type constructors. Previously, Docs.hs
thought the Names were located in the RHS, so the RealSrcSpan in the
instanceMap and getInstLoc didn't match up. Fixes #18241
- - - - -
6735b9d9 by Ben Gamari at 2020-06-04T04:37:21-04:00
GHC.Hs.Instances: Compile with -O0
This module contains exclusively Data instances, which are going to be
slow no matter what we do. Furthermore, they are incredibly slow to
compile with optimisation (see #9557). Consequently we compile this with
-O0. See #18254.
- - - - -
c330331a by nineonine at 2020-06-04T04:37:59-04:00
Add test for #17669
- - - - -
cab684f0 by Ben Gamari at 2020-06-04T04:38:36-04:00
rts: Add Windows-specific implementation of rtsSleep
Previously we would use the POSIX path, which uses `nanosleep`. However,
it turns out that `nanosleep` is provided by `libpthread` on Windows. In
general we don't want to incur such a dependency. Avoid this by simply
using `Sleep` on Windows.
Fixes #18272.
- - - - -
ad44b504 by Ben Gamari at 2020-06-04T04:38:36-04:00
compiler: Disable use of process jobs with process < 1.6.9
Due to #17926.
- - - - -
6a4098a4 by Moritz Angermann at 2020-06-04T04:55:51-04:00
[linker] Adds void printLoadedObjects(void);
This allows us to dump in-memory object code locations for debugging.
Fixup printLoadedObjects prototype
- - - - -
af5e3a88 by Artem Pelenitsyn at 2020-06-05T03:18:49-04:00
base: fix sign confusion in log1mexp implementation (fix #17125)
author: claude (https://gitlab.haskell.org/trac-claude)
The correct threshold for log1mexp is -(log 2) with the current specification
of log1mexp. This change improves accuracy for large negative inputs.
To avoid code duplication, a small helper function is added;
it isn't the default implementation in Floating because it needs Ord.
This patch does nothing to address that the Haskell specification is
different from that in common use in other languages.
- - - - -
2b792fac by Simon Peyton Jones at 2020-06-05T09:27:50-04:00
Simple subsumption
This patch simplifies GHC to use simple subsumption.
Ticket #17775
Implements GHC proposal #287
https://github.com/ghc-proposals/ghc-proposals/blob/master/
proposals/0287-simplify-subsumption.rst
All the motivation is described there; I will not repeat it here.
The implementation payload:
* tcSubType and friends become noticably simpler, because it no
longer uses eta-expansion when checking subsumption.
* No deeplyInstantiate or deeplySkolemise
That in turn means that some tests fail, by design; they can all
be fixed by eta expansion. There is a list of such changes below.
Implementing the patch led me into a variety of sticky corners, so
the patch includes several othe changes, some quite significant:
* I made String wired-in, so that
"foo" :: String rather than
"foo" :: [Char]
This improves error messages, and fixes #15679
* The pattern match checker relies on knowing about in-scope equality
constraints, andd adds them to the desugarer's environment using
addTyCsDs. But the co_fn in a FunBind was missed, and for some reason
simple-subsumption ends up with dictionaries there. So I added a
call to addTyCsDs. This is really part of #18049.
* I moved the ic_telescope field out of Implication and into
ForAllSkol instead. This is a nice win; just expresses the code
much better.
* There was a bug in GHC.Tc.TyCl.Instance.tcDataFamInstHeader.
We called checkDataKindSig inside tc_kind_sig, /before/
solveEqualities and zonking. Obviously wrong, easily fixed.
* solveLocalEqualitiesX: there was a whole mess in here, around
failing fast enough. I discovered a bad latent bug where we
could successfully kind-check a type signature, and use it,
but have unsolved constraints that could fill in coercion
holes in that signature -- aargh.
It's all explained in Note [Failure in local type signatures]
in GHC.Tc.Solver. Much better now.
* I fixed a serious bug in anonymous type holes. IN
f :: Int -> (forall a. a -> _) -> Int
that "_" should be a unification variable at the /outer/
level; it cannot be instantiated to 'a'. This was plain
wrong. New fields mode_lvl and mode_holes in TcTyMode,
and auxiliary data type GHC.Tc.Gen.HsType.HoleMode.
This fixes #16292, but makes no progress towards the more
ambitious #16082
* I got sucked into an enormous refactoring of the reporting of
equality errors in GHC.Tc.Errors, especially in
mkEqErr1
mkTyVarEqErr
misMatchMsg
misMatchMsgOrCND
In particular, the very tricky mkExpectedActualMsg function
is gone.
It took me a full day. But the result is far easier to understand.
(Still not easy!) This led to various minor improvements in error
output, and an enormous number of test-case error wibbles.
One particular point: for occurs-check errors I now just say
Can't match 'a' against '[a]'
rather than using the intimidating language of "occurs check".
* Pretty-printing AbsBinds
Tests review
* Eta expansions
T11305: one eta expansion
T12082: one eta expansion (undefined)
T13585a: one eta expansion
T3102: one eta expansion
T3692: two eta expansions (tricky)
T2239: two eta expansions
T16473: one eta
determ004: two eta expansions (undefined)
annfail06: two eta (undefined)
T17923: four eta expansions (a strange program indeed!)
tcrun035: one eta expansion
* Ambiguity check at higher rank. Now that we have simple
subsumption, a type like
f :: (forall a. Eq a => Int) -> Int
is no longer ambiguous, because we could write
g :: (forall a. Eq a => Int) -> Int
g = f
and it'd typecheck just fine. But f's type is a bit
suspicious, and we might want to consider making the
ambiguity check do a check on each sub-term. Meanwhile,
these tests are accepted, whereas they were previously
rejected as ambiguous:
T7220a
T15438
T10503
T9222
* Some more interesting error message wibbles
T13381: Fine: one error (Int ~ Exp Int)
rather than two (Int ~ Exp Int, Exp Int ~ Int)
T9834: Small change in error (improvement)
T10619: Improved
T2414: Small change, due to order of unification, fine
T2534: A very simple case in which a change of unification order
means we get tow unsolved constraints instead of one
tc211: bizarre impredicative tests; just accept this for now
Updates Cabal and haddock submodules.
Metric Increase:
T12150
T12234
T5837
haddock.base
Metric Decrease:
haddock.compiler
haddock.Cabal
haddock.base
Merge note: This appears to break the
`UnliftedNewtypesDifficultUnification` test. It has been marked as
broken in the interest of merging.
(cherry picked from commit 66b7b195cb3dce93ed5078b80bf568efae904cc5)
- - - - -
2dff8141 by Ryan Scott at 2020-06-05T14:21:24-04:00
Simplify bindLHsTyVarBndrs and bindHsQTyVars
Both `bindLHsTyVarBndrs` and `bindHsQTyVars` take two separate
`Maybe` arguments, which I find terribly confusing. Thankfully, it's
possible to remove one `Maybe` argument from each of these functions,
which this patch accomplishes:
* `bindHsQTyVars` takes a `Maybe SDoc` argument, which is `Just` if
GHC should warn about any of the quantified type variables going
unused. However, every call site uses `Nothing` in practice. This
makes sense, since it doesn't really make sense to warn about
unused type variables bound by an `LHsQTyVars`. For instance, you
wouldn't warn about the `a` in `data Proxy a = Proxy` going unused.
As a result, I simply remove this `Maybe SDoc` argument altogether.
* `bindLHsTyVarBndrs` also takes a `Maybe SDoc` argument for the same
reasons that `bindHsQTyVars` took one. To make things more
confusing, however, `bindLHsTyVarBndrs` also takes a separate
`HsDocContext` argument, which is pretty-printed (to an `SDoc`) in
warnings and error messages.
In practice, the `Maybe SDoc` and the `HsDocContext` often contain
the same text. See the call sites for `bindLHsTyVarBndrs` in
`rnFamInstEqn` and `rnConDecl`, for instance. There are only a
handful of call sites where the text differs between the
`Maybe SDoc` and `HsDocContext` arguments:
* In `rnHsRuleDecl`, where the `Maybe SDoc` says "`In the rule`"
and the `HsDocContext` says "`In the transformation rule`".
* In `rnHsTyKi`/`rn_ty`, where the `Maybe SDoc` says
"`In the type`" but the `HsDocContext` is inhereted from the
surrounding context (e.g., if `rnHsTyKi` were called on a
top-level type signature, the `HsDocContext` would be
"`In the type signature`" instead)
In both cases, warnings/error messages arguably _improve_ by
unifying making the `Maybe SDoc`'s text match that of the
`HsDocContext`. As a result, I decided to remove the `Maybe SDoc`
argument to `bindLHsTyVarBndrs` entirely and simply reuse the text
from the `HsDocContext`. (I decided to change the phrase
"transformation rule" to "rewrite rule" while I was in the area.)
The `Maybe SDoc` argument has one other purpose: signaling when to
emit "`Unused quantified type variable`" warnings. To recover this
functionality, I replaced the `Maybe SDoc` argument with a
boolean-like `WarnUnusedForalls` argument. The only
`bindLHsTyVarBndrs` call site that chooses _not_ to emit these
warnings in `bindHsQTyVars`.
- - - - -
e372331b by Ben Gamari at 2020-06-07T08:46:41-04:00
hadrian: Add missing deriveConstants dependency on ghcplatform.h
deriveConstants wants to compile C sources which #include PosixSource.h,
which itself #includes ghcplatform.h. Make sure that Hadrian knows
about this dependency.
Fixes #18290.
- - - - -
b022051a by Moritz Angermann at 2020-06-07T08:46:42-04:00
ghc-prim needs to depend on libc and libm
libm is just an empty shell on musl, and all the math functions are contained in
libc.
- - - - -
6dae6548 by Moritz Angermann at 2020-06-07T08:46:42-04:00
Disable DLL loading if without system linker
Some platforms (musl, aarch64) do not have a working dynamic linker
implemented in the libc, even though we might see dlopen. It will
ultimately just return that this is not supported. Hence we'll add
a flag to the compiler to flat our disable loading dlls. This is
needed as we will otherwise try to load the shared library even
if this will subsequently fail. At that point we have given up
looking for static options though.
- - - - -
4a158ffc by Moritz Angermann at 2020-06-07T08:46:43-04:00
Range is actually +/-2^32, not +/-2^31
See also: https://static.docs.arm.com/ihi0056/g/aaelf64.pdf
- - - - -
f1bfb806 by Ben Gamari at 2020-06-07T10:49:30-04:00
OccurAnal: Avoid exponential behavior due to where clauses
Previously the `Var` case of `occAnalApp` could in some cases (namely
in the case of `runRW#` applications) call `occAnalRhs` two. In the case
of nested `runRW#`s this results in exponential complexity. In some
cases the compilation time that resulted would be very long indeed
(see #18296).
Fixes #18296.
Metric Decrease:
T9961
T12150
T12234
- - - - -
9b607671 by Takenobu Tani at 2020-06-09T08:05:46-04:00
Add link to GHC's wiki in the GHC API header
This adds a URL to point to GHC's wiki in the GHC API header.
Newcomers could easily find more information from the GHC API's
web like [1].
[1]: Current version, https://ghc.gitlab.haskell.org/ghc/doc/libraries/ghc-8.11.0.20200604/index.html
[skip ci]
- - - - -
72c7fe9a by Ryan Scott at 2020-06-09T08:06:24-04:00
Make GADT constructors adhere to the forall-or-nothing rule properly
Issue #18191 revealed that the types of GADT constructors don't quite
adhere to the `forall`-or-nothing rule. This patch serves to clean up
this sad state of affairs somewhat. The main change is not in the
code itself, but in the documentation, as this patch introduces two
sections to the GHC User's Guide:
* A "Formal syntax for GADTs" section that presents a BNF-style
grammar for what is and isn't allowed in GADT constructor types.
This mostly exists to codify GHC's existing behavior, but it also
imposes a new restriction that addresses #18191: the outermost
`forall` and/or context in a GADT constructor is not allowed to be
surrounded by parentheses. Doing so would make these
`forall`s/contexts nested, and GADTs do not support nested
`forall`s/contexts at present.
* A "`forall`-or-nothing rule" section that describes exactly what
the `forall`-or-nothing rule is all about. Surprisingly, there was
no mention of this anywhere in the User's Guide up until now!
To adhere the new specification in the "Formal syntax for GADTs"
section of the User's Guide, the following code changes were made:
* A new function, `GHC.Hs.Type.splitLHsGADTPrefixTy`, was introduced.
This is very much like `splitLHsSigmaTy`, except that it avoids
splitting apart any parentheses, which can be syntactically
significant for GADT types. See
`Note [No nested foralls or contexts in GADT constructors]` in
`GHC.Hs.Type`.
* `ConDeclGADTPrefixPs`, an extension constructor for `XConDecl`, was
introduced so that `GHC.Parser.PostProcess.mkGadtDecl` can return
it when given a prefix GADT constructor. Unlike `ConDeclGADT`,
`ConDeclGADTPrefixPs` does not split the GADT type into its argument
and result types, as this cannot be done until after the type is
renamed (see `Note [GADT abstract syntax]` in `GHC.Hs.Decls` for why
this is the case).
* `GHC.Renamer.Module.rnConDecl` now has an additional case for
`ConDeclGADTPrefixPs` that (1) splits apart the full `LHsType` into
its `forall`s, context, argument types, and result type, and
(2) checks for nested `forall`s/contexts. Step (2) used to be
performed the typechecker (in `GHC.Tc.TyCl.badDataConTyCon`) rather
than the renamer, but now the relevant code from the typechecker
can simply be deleted.
One nice side effect of this change is that we are able to give a
more accurate error message for GADT constructors that use visible
dependent quantification (e.g., `MkFoo :: forall a -> a -> Foo a`),
which improves the stderr in the `T16326_Fail6` test case.
Fixes #18191. Bumps the Haddock submodule.
- - - - -
a47e6442 by Ryan Scott at 2020-06-10T03:39:12-04:00
Always use rnImplicitBndrs to bring implicit tyvars into scope
This implements a first step towards #16762 by changing the renamer
to always use `rnImplicitBndrs` to bring implicitly bound type
variables into scope. The main change is in `rnFamInstEqn` and
`bindHsQTyVars`, which previously used _ad hoc_ methods of binding
their implicit tyvars.
There are a number of knock-on consequences:
* One of the reasons that `rnFamInstEqn` used an _ad hoc_ binding
mechanism was to give more precise source locations in
`-Wunused-type-patterns` warnings. (See
https://gitlab.haskell.org/ghc/ghc/issues/16762#note_273343 for an
example of this.) However, these warnings are actually a little
_too_ precise, since implicitly bound type variables don't have
exact binding sites like explicitly bound type variables do.
A similar problem existed for
"`Different names for the same type variable`" errors involving
implicit tyvars bound by `bindHsQTyVars`.
Therefore, we simply accept the less precise (but more accurate)
source locations from `rnImplicitBndrs` in `rnFamInstEqn` and
`bindHsQTyVars`. See
`Note [Source locations for implicitly bound type variables]` in
`GHC.Rename.HsType` for the full story.
* In order for `rnImplicitBndrs` to work in `rnFamInstEqn`, it needs
to be able to look up names from the parent class (in the event
that we are renaming an associated type family instance). As a
result, `rnImplicitBndrs` now takes an argument of type
`Maybe assoc`, which is `Just` in the event that a type family
instance is associated with a class.
* Previously, GHC kept track of three type synonyms for free type
variables in the renamer: `FreeKiTyVars`, `FreeKiTyVarsDups`
(which are allowed to contain duplicates), and
`FreeKiTyVarsNoDups` (which contain no duplicates). However, making
is a distinction between `-Dups` and `-NoDups` is now pointless, as
all code that returns `FreeKiTyVars{,Dups,NoDups}` will eventually
end up being passed to `rnImplicitBndrs`, which removes duplicates.
As a result, I decided to just get rid of `FreeKiTyVarsDups` and
`FreeKiTyVarsNoDups`, leaving only `FreeKiTyVars`.
* The `bindLRdrNames` and `deleteBys` functions are now dead code, so
I took the liberty of removing them.
- - - - -
24879129 by Takenobu Tani at 2020-06-10T03:39:59-04:00
Clarify leaf module names for new module hierarchy
This updates comments only.
This patch replaces leaf module names according to new module
hierarchy [1][2] as followings:
* Expand leaf names to easily find the module path:
for instance, `Id.hs` to `GHC.Types.Id`.
* Modify leaf names according to new module hierarchy:
for instance, `Convert.hs` to `GHC.ThToHs`.
* Fix typo:
for instance, `GHC.Core.TyCo.Rep.hs` to `GHC.Core.TyCo.Rep`
See also !3375
[1]: https://gitlab.haskell.org/ghc/ghc/-/wikis/Make-GHC-codebase-more-modular
[2]: https://gitlab.haskell.org/ghc/ghc/issues/13009
- - - - -
92de9e25 by Ömer Sinan Ağacan at 2020-06-10T03:41:07-04:00
rts: Remove unused GET_ENTRY closure macro
This macro is not used and got broken in the meantime, as ENTRY_CODE was
deleted.
- - - - -
87102928 by Ömer Sinan Ağacan at 2020-06-10T03:41:50-04:00
Fix -fkeep-cafs flag name in users guide
- - - - -
ccd6843d by Shayne Fletcher at 2020-06-10T04:14:57-04:00
Expose impliedGFlags, impledOffGFlags, impliedXFlags
- - - - -
7a737e89 by Ömer Sinan Ağacan at 2020-06-10T04:14:58-04:00
Cross-module LambdaFormInfo passing
- Store LambdaFormInfos of exported Ids in interface files
- Use them in importing modules
This is for optimization purposes: if we know LambdaFormInfo of imported
Ids we can generate more efficient calling code, see `getCallMethod`.
Exporting (putting them in interface files or in ModDetails) and
importing (reading them from interface files) are both optional. We
don't assume known LambdaFormInfos anywhere and do not change how we
call Ids with unknown LambdaFormInfos.
Runtime, allocation, and residency numbers when building
Cabal-the-library (commit 0d4ee7ba3):
(Log and .hp files are in the MR: !2842)
| | GHC HEAD | This patch | Diff |
|-----|----------|------------|----------------|
| -O0 | 0:35.89 | 0:34.10 | -1.78s, -4.98% |
| -O1 | 2:24.01 | 2:23.62 | -0.39s, -0.27% |
| -O2 | 2:52.23 | 2:51.35 | -0.88s, -0.51% |
| | GHC HEAD | This patch | Diff |
|-----|-----------------|-----------------|----------------------------|
| -O0 | 54,843,608,416 | 54,878,769,544 | +35,161,128 bytes, +0.06% |
| -O1 | 227,136,076,400 | 227,569,045,168 | +432,968,768 bytes, +0.19% |
| -O2 | 266,147,063,296 | 266,749,643,440 | +602,580,144 bytes, +0.22% |
NOTE: Residency is measured with extra runtime args: `-i0 -h` which effectively
turn all GCs into major GCs, and do GC more often.
| | GHC HEAD | This patch | Diff |
|-----|----------------------------|------------------------------|----------------------------|
| -O0 | 410,284,000 (910 samples) | 411,745,008 (906 samples) | +1,461,008 bytes, +0.35% |
| -O1 | 928,580,856 (2109 samples) | 943,506,552 (2103 samples) | +14,925,696 bytes, +1.60% |
| -O2 | 993,951,352 (2549 samples) | 1,010,156,328 (2545 samples) | +16,204,9760 bytes, +1.63% |
NoFib results:
--------------------------------------------------------------------------------
Program Size Allocs Instrs Reads Writes
--------------------------------------------------------------------------------
CS 0.0% 0.0% +0.0% +0.0% +0.0%
CSD 0.0% 0.0% 0.0% +0.0% +0.0%
FS 0.0% 0.0% +0.0% +0.0% +0.0%
S 0.0% 0.0% +0.0% +0.0% +0.0%
VS 0.0% 0.0% +0.0% +0.0% +0.0%
VSD 0.0% 0.0% +0.0% +0.0% +0.1%
VSM 0.0% 0.0% +0.0% +0.0% +0.0%
anna 0.0% 0.0% -0.3% -0.8% -0.0%
ansi 0.0% 0.0% -0.0% -0.0% 0.0%
atom 0.0% 0.0% -0.0% -0.0% 0.0%
awards 0.0% 0.0% -0.1% -0.3% 0.0%
banner 0.0% 0.0% -0.0% -0.0% -0.0%
bernouilli 0.0% 0.0% -0.0% -0.0% -0.0%
binary-trees 0.0% 0.0% -0.0% -0.0% +0.0%
boyer 0.0% 0.0% -0.0% -0.0% 0.0%
boyer2 0.0% 0.0% -0.0% -0.0% 0.0%
bspt 0.0% 0.0% -0.0% -0.2% 0.0%
cacheprof 0.0% 0.0% -0.1% -0.4% +0.0%
calendar 0.0% 0.0% -0.0% -0.0% 0.0%
cichelli 0.0% 0.0% -0.9% -2.4% 0.0%
circsim 0.0% 0.0% -0.0% -0.0% 0.0%
clausify 0.0% 0.0% -0.1% -0.3% 0.0%
comp_lab_zift 0.0% 0.0% -0.0% -0.0% +0.0%
compress 0.0% 0.0% -0.0% -0.0% -0.0%
compress2 0.0% 0.0% -0.0% -0.0% 0.0%
constraints 0.0% 0.0% -0.1% -0.2% -0.0%
cryptarithm1 0.0% 0.0% -0.0% -0.0% 0.0%
cryptarithm2 0.0% 0.0% -1.4% -4.1% -0.0%
cse 0.0% 0.0% -0.0% -0.0% -0.0%
digits-of-e1 0.0% 0.0% -0.0% -0.0% -0.0%
digits-of-e2 0.0% 0.0% -0.0% -0.0% -0.0%
dom-lt 0.0% 0.0% -0.1% -0.2% 0.0%
eliza 0.0% 0.0% -0.5% -1.5% 0.0%
event 0.0% 0.0% -0.0% -0.0% -0.0%
exact-reals 0.0% 0.0% -0.1% -0.3% +0.0%
exp3_8 0.0% 0.0% -0.0% -0.0% -0.0%
expert 0.0% 0.0% -0.3% -1.0% -0.0%
fannkuch-redux 0.0% 0.0% +0.0% +0.0% +0.0%
fasta 0.0% 0.0% -0.0% -0.0% +0.0%
fem 0.0% 0.0% -0.0% -0.0% 0.0%
fft 0.0% 0.0% -0.0% -0.0% 0.0%
fft2 0.0% 0.0% -0.0% -0.0% 0.0%
fibheaps 0.0% 0.0% -0.0% -0.0% +0.0%
fish 0.0% 0.0% 0.0% -0.0% +0.0%
fluid 0.0% 0.0% -0.4% -1.2% +0.0%
fulsom 0.0% 0.0% -0.0% -0.0% 0.0%
gamteb 0.0% 0.0% -0.1% -0.3% 0.0%
gcd 0.0% 0.0% -0.0% -0.0% 0.0%
gen_regexps 0.0% 0.0% -0.0% -0.0% -0.0%
genfft 0.0% 0.0% -0.0% -0.0% 0.0%
gg 0.0% 0.0% -0.0% -0.0% +0.0%
grep 0.0% 0.0% -0.0% -0.0% -0.0%
hidden 0.0% 0.0% -0.1% -0.4% -0.0%
hpg 0.0% 0.0% -0.2% -0.5% +0.0%
ida 0.0% 0.0% -0.0% -0.0% +0.0%
infer 0.0% 0.0% -0.3% -0.8% -0.0%
integer 0.0% 0.0% -0.0% -0.0% +0.0%
integrate 0.0% 0.0% -0.0% -0.0% 0.0%
k-nucleotide 0.0% 0.0% -0.0% -0.0% +0.0%
kahan 0.0% 0.0% -0.0% -0.0% +0.0%
knights 0.0% 0.0% -2.2% -5.4% 0.0%
lambda 0.0% 0.0% -0.6% -1.8% 0.0%
last-piece 0.0% 0.0% -0.0% -0.0% 0.0%
lcss 0.0% 0.0% -0.0% -0.1% 0.0%
life 0.0% 0.0% -0.0% -0.1% 0.0%
lift 0.0% 0.0% -0.2% -0.6% +0.0%
linear 0.0% 0.0% -0.0% -0.0% -0.0%
listcompr 0.0% 0.0% -0.0% -0.0% 0.0%
listcopy 0.0% 0.0% -0.0% -0.0% 0.0%
maillist 0.0% 0.0% -0.1% -0.3% +0.0%
mandel 0.0% 0.0% -0.0% -0.0% 0.0%
mandel2 0.0% 0.0% -0.0% -0.0% -0.0%
mate +0.0% 0.0% -0.0% -0.0% -0.0%
minimax 0.0% 0.0% -0.2% -1.0% 0.0%
mkhprog 0.0% 0.0% -0.1% -0.2% -0.0%
multiplier 0.0% 0.0% -0.0% -0.0% -0.0%
n-body 0.0% 0.0% -0.0% -0.0% +0.0%
nucleic2 0.0% 0.0% -0.1% -0.2% 0.0%
para 0.0% 0.0% -0.0% -0.0% -0.0%
paraffins 0.0% 0.0% -0.0% -0.0% 0.0%
parser 0.0% 0.0% -0.2% -0.7% 0.0%
parstof 0.0% 0.0% -0.0% -0.0% +0.0%
pic 0.0% 0.0% -0.0% -0.0% 0.0%
pidigits 0.0% 0.0% +0.0% +0.0% +0.0%
power 0.0% 0.0% -0.2% -0.6% +0.0%
pretty 0.0% 0.0% -0.0% -0.0% -0.0%
primes 0.0% 0.0% -0.0% -0.0% 0.0%
primetest 0.0% 0.0% -0.0% -0.0% -0.0%
prolog 0.0% 0.0% -0.3% -1.1% 0.0%
puzzle 0.0% 0.0% -0.0% -0.0% 0.0%
queens 0.0% 0.0% -0.0% -0.0% +0.0%
reptile 0.0% 0.0% -0.0% -0.0% 0.0%
reverse-complem 0.0% 0.0% -0.0% -0.0% +0.0%
rewrite 0.0% 0.0% -0.7% -2.5% -0.0%
rfib 0.0% 0.0% -0.0% -0.0% 0.0%
rsa 0.0% 0.0% -0.0% -0.0% 0.0%
scc 0.0% 0.0% -0.1% -0.2% -0.0%
sched 0.0% 0.0% -0.0% -0.0% -0.0%
scs 0.0% 0.0% -1.0% -2.6% +0.0%
simple 0.0% 0.0% +0.0% -0.0% +0.0%
solid 0.0% 0.0% -0.0% -0.0% 0.0%
sorting 0.0% 0.0% -0.6% -1.6% 0.0%
spectral-norm 0.0% 0.0% +0.0% 0.0% +0.0%
sphere 0.0% 0.0% -0.0% -0.0% -0.0%
symalg 0.0% 0.0% -0.0% -0.0% +0.0%
tak 0.0% 0.0% -0.0% -0.0% 0.0%
transform 0.0% 0.0% -0.0% -0.0% 0.0%
treejoin 0.0% 0.0% -0.0% -0.0% 0.0%
typecheck 0.0% 0.0% -0.0% -0.0% +0.0%
veritas +0.0% 0.0% -0.2% -0.4% +0.0%
wang 0.0% 0.0% -0.0% -0.0% 0.0%
wave4main 0.0% 0.0% -0.0% -0.0% -0.0%
wheel-sieve1 0.0% 0.0% -0.0% -0.0% -0.0%
wheel-sieve2 0.0% 0.0% -0.0% -0.0% +0.0%
x2n1 0.0% 0.0% -0.0% -0.0% -0.0%
--------------------------------------------------------------------------------
Min 0.0% 0.0% -2.2% -5.4% -0.0%
Max +0.0% 0.0% +0.0% +0.0% +0.1%
Geometric Mean -0.0% -0.0% -0.1% -0.3% +0.0%
Metric increases micro benchmarks tracked in #17686:
Metric Increase:
T12150
T12234
T12425
T13035
T5837
T6048
T9233
Co-authored-by: Andreas Klebinger <klebinger.andreas at gmx.at>
- - - - -
3b22b14a by Shayne Fletcher at 2020-06-10T04:15:01-04:00
Give Language a Bounded instance
- - - - -
9454511b by Simon Peyton Jones at 2020-06-10T04:17:06-04:00
Optimisation in Unique.Supply
This patch switches on -fno-state-hack in GHC.Types.Unique.Supply.
It turned out that my fixes for #18078 (coercion floating) changed the
optimisation pathway for mkSplitUniqSupply in such a way that we had
an extra allocation inside the inner loop. Adding -fno-state-hack
fixed that -- and indeed the loop in mkSplitUniqSupply is a classic
example of the way in which -fno-state-hack can be bad; see #18238.
Moreover, the new code is better than the old. They allocate
the same, but the old code ends up with a partial application.
The net effect is that the test
perf/should_run/UniqLoop
runs 20% faster! From 2.5s down to 2.0s. The allocation numbers
are the same -- but elapsed time falls. Good!
The bad thing about this is that it's terribly delicate. But
at least it's a good example of such delicacy in action.
There is a long Note [Optimising the unique supply] which now
explains all this.
- - - - -
6d49d5be by Simon Peyton Jones at 2020-06-10T04:17:06-04:00
Implement cast worker/wrapper properly
The cast worker/wrapper transformation transforms
x = e |> co
into
y = e
x = y |> co
This is done by the simplifier, but we were being
careless about transferring IdInfo from x to y,
and about what to do if x is a NOINLNE function.
This resulted in a series of bugs:
#17673, #18093, #18078.
This patch fixes all that:
* Main change is in GHC.Core.Opt.Simplify, and
the new prepareBinding function, which does this
cast worker/wrapper transform.
See Note [Cast worker/wrappers].
* There is quite a bit of refactoring around
prepareRhs, makeTrivial etc. It's nicer now.
* Some wrappers from strictness and cast w/w, notably those for
a function with a NOINLINE, should inline very late. There
wasn't really a mechanism for that, which was an existing bug
really; so I invented a new finalPhase = Phase (-1). It's used
for all simplifier runs after the user-visible phase 2,1,0 have
run. (No new runs of the simplifier are introduced thereby.)
See new Note [Compiler phases] in GHC.Types.Basic;
the main changes are in GHC.Core.Opt.Driver
* Doing this made me trip over two places where the AnonArgFlag on a
FunTy was being lost so we could end up with (Num a -> ty)
rather than (Num a => ty)
- In coercionLKind/coercionRKind
- In contHoleType in the Simplifier
I fixed the former by defining mkFunctionType and using it in
coercionLKind/RKind.
I could have done the same for the latter, but the information
is almost to hand. So I fixed the latter by
- adding sc_hole_ty to ApplyToVal (like ApplyToTy),
- adding as_hole_ty to ValArg (like TyArg)
- adding sc_fun_ty to StrictArg
Turned out I could then remove ai_type from ArgInfo. This is
just moving the deck chairs around, but it worked out nicely.
See the new Note [AnonArgFlag] in GHC.Types.Var
* When looking at the 'arity decrease' thing (#18093) I discovered
that stable unfoldings had a much lower arity than the actual
optimised function. That's what led to the arity-decrease
message. Simple solution: eta-expand.
It's described in Note [Eta-expand stable unfoldings]
in GHC.Core.Opt.Simplify
* I also discovered that unsafeCoerce wasn't being inlined if
the context was boring. So (\x. f (unsafeCoerce x)) would
create a thunk -- yikes! I fixed that by making inlineBoringOK
a bit cleverer: see Note [Inline unsafeCoerce] in GHC.Core.Unfold.
I also found that unsafeCoerceName was unused, so I removed it.
I made a test case for #18078, and a very similar one for #17673.
The net effect of all this on nofib is very modest, but positive:
--------------------------------------------------------------------------------
Program Size Allocs Runtime Elapsed TotalMem
--------------------------------------------------------------------------------
anna -0.4% -0.1% -3.1% -3.1% 0.0%
fannkuch-redux -0.4% -0.3% -0.1% -0.1% 0.0%
maillist -0.4% -0.1% -7.8% -1.0% -14.3%
primetest -0.4% -15.6% -7.1% -6.6% 0.0%
--------------------------------------------------------------------------------
Min -0.9% -15.6% -13.3% -14.2% -14.3%
Max -0.3% 0.0% +12.1% +12.4% 0.0%
Geometric Mean -0.4% -0.2% -2.3% -2.2% -0.1%
All following metric decreases are compile-time allocation decreases
between -1% and -3%:
Metric Decrease:
T5631
T13701
T14697
T15164
- - - - -
32fd37f5 by Luke Lau at 2020-06-10T04:17:22-04:00
Fix lookupGlobalOccRn_maybe sometimes reporting an error
In some cases it was possible for lookupGlobalOccRn_maybe to return an
error, when it should be returning a Nothing. If it called
lookupExactOcc_either when there were no matching GlobalRdrElts in the
otherwise case, it would return an error message. This could be caused
when lookupThName_maybe in Template Haskell was looking in different
namespaces (thRdrNameGuesses), guessing different namespaces that the
name wasn't guaranteed to be found in.
However, by addressing this some more accurate errors were being lost in
the conversion to Maybes. So some of the lookup* functions have been
shuffled about so that errors should always be ignored in
lookup*_maybes, and propagated otherwise.
This fixes #18263
- - - - -
9b283e1b by Roland Senn at 2020-06-10T04:17:34-04:00
Initialize the allocation counter in GHCi to 0 (Fixes #16012)
According to the documentation for the function `getAllocationCounter` in
[System.Mem](http://hackage.haskell.org/package/base-4.14.0.0/docs/System-Mem.html)
initialize the allocationCounter also in GHCi to 0.
- - - - -
8d07c48c by Sylvain Henry at 2020-06-10T04:17:36-04:00
test: fix conc038
We had spurious failures of conc038 test on CI with stdout:
```
newThread started
-mainThread
-Haskell: 2
newThread back again
+mainThread
1 sec later
shutting down
+Haskell: 2
```
- - - - -
4c7e9689 by Sebastian Graf at 2020-06-11T10:37:38+02:00
Release Notes: Add news from the pattern-match checker [skip ci]
- - - - -
3445b965 by Sylvain Henry at 2020-06-13T02:13:01-04:00
Only test T16190 with the NCG
T16190 is meant to test a NCG feature. It has already caused spurious
failures in other MRs (e.g. !2165) when LLVM is used.
- - - - -
2517a51c by Sylvain Henry at 2020-06-13T02:13:01-04:00
DynFlags refactoring VIII (#17957)
* Remove several uses of `sdocWithDynFlags`, especially in GHC.Llvm.*
* Add LlvmOpts datatype to store Llvm backend options
* Remove Outputable instances (for LlvmVar, LlvmLit, LlvmStatic and
Llvm.MetaExpr) which require LlvmOpts.
* Rename ppMetaExpr into ppMetaAnnotExpr (pprMetaExpr is now used in place of `ppr :: MetaExpr -> SDoc`)
- - - - -
7a02599a by Sylvain Henry at 2020-06-13T02:13:02-04:00
Remove unused code
- - - - -
72d08610 by Sylvain Henry at 2020-06-13T02:13:02-04:00
Refactor homeUnit
* rename thisPackage into homeUnit
* document and refactor several Backpack things
- - - - -
8dc71f55 by Sylvain Henry at 2020-06-13T02:13:02-04:00
Rename unsafeGetUnitInfo into unsafeLookupUnit
- - - - -
f6be6e43 by Sylvain Henry at 2020-06-13T02:13:02-04:00
Add allowVirtualUnits field in PackageState
Instead of always querying DynFlags to know whether we are allowed to
use virtual units (i.e. instantiated on-the-fly, cf Note [About units]
in GHC.Unit), we store it once for all in
`PackageState.allowVirtualUnits`.
This avoids using DynFlags too much (cf #17957) and is preliminary work
for #14335.
- - - - -
e7272d53 by Sylvain Henry at 2020-06-13T02:13:02-04:00
Enhance UnitId use
* use UnitId instead of String to identify wired-in units
* use UnitId instead of Unit in the backend (Unit are only use by
Backpack to produce type-checked interfaces, not real code)
* rename lookup functions for consistency
* documentation
- - - - -
9c5572cd by Sylvain Henry at 2020-06-13T02:13:02-04:00
Remove LinkerUnitId type alias
- - - - -
d345edfe by Sylvain Henry at 2020-06-13T02:13:02-04:00
Refactor WiredMap
* Remove WiredInUnitId and WiredUnitId type aliases
- - - - -
3d171cd6 by Sylvain Henry at 2020-06-13T02:13:03-04:00
Document and refactor `mkUnit` and `mkUnitInfoMap`
- - - - -
d2109b4f by Sylvain Henry at 2020-06-13T02:13:03-04:00
Remove PreloadUnitId type alias
- - - - -
f50c19b8 by Sylvain Henry at 2020-06-13T02:13:03-04:00
Rename listUnitInfoMap into listUnitInfo
There is no Map involved
- - - - -
ed533ec2 by Sylvain Henry at 2020-06-13T02:13:03-04:00
Rename Package into Unit
The terminology changed over time and now package databases contain
"units" (there can be several units compiled from a single Cabal
package: one per-component, one for each option set, one per
instantiation, etc.). We should try to be consistent internally and use
"units": that's what this renaming does. Maybe one day we'll fix the UI
too (e.g. replace -package-id with -unit-id, we already have
-this-unit-id and ghc-pkg has -unit-id...) but it's not done in this
patch.
* rename getPkgFrameworkOpts into getUnitFrameworkOpts
* rename UnitInfoMap into ClosureUnitInfoMap
* rename InstalledPackageIndex into UnitInfoMap
* rename UnusablePackages into UnusableUnits
* rename PackagePrecedenceIndex into UnitPrecedenceMap
* rename PackageDatabase into UnitDatabase
* rename pkgDatabase into unitDatabases
* rename pkgState into unitState
* rename initPackages into initUnits
* rename renamePackage into renameUnitInfo
* rename UnusablePackageReason into UnusableUnitReason
* rename getPackage* into getUnit*
* etc.
- - - - -
202728e5 by Sylvain Henry at 2020-06-13T02:13:03-04:00
Make ClosureUnitInfoMap uses UnitInfoMap
- - - - -
55b4263e by Sylvain Henry at 2020-06-13T02:13:03-04:00
Remove ClosureUnitInfoMap
- - - - -
653d17bd by Sylvain Henry at 2020-06-13T02:13:03-04:00
Rename Package into Unit (2)
* rename PackageState into UnitState
* rename findWiredInPackages into findWiredInUnits
* rename lookupModuleInAll[Packages,Units]
* etc.
- - - - -
ae900605 by Sylvain Henry at 2020-06-13T02:13:03-04:00
Move dump_mod_map into initUnits
- - - - -
598cc1dd by Sylvain Henry at 2020-06-13T02:13:03-04:00
Move wiring of homeUnitInstantiations outside of mkUnitState
- - - - -
437265eb by Sylvain Henry at 2020-06-13T02:13:03-04:00
Avoid timing module map dump in initUnits
- - - - -
9400aa93 by Sylvain Henry at 2020-06-13T02:13:03-04:00
Remove preload parameter of mkUnitState
* Remove preload parameter (unused)
* Don't explicitly return preloaded units: redundant because already
returned as "preloadUnits" field of UnitState
- - - - -
266bc3d9 by Sylvain Henry at 2020-06-13T02:13:03-04:00
DynFlags: refactor unwireUnit
- - - - -
9e715c1b by Sylvain Henry at 2020-06-13T02:13:03-04:00
Document getPreloadUnitsAnd
- - - - -
bd5810dc by Sylvain Henry at 2020-06-13T02:13:03-04:00
DynFlags: remove useless add_package parameter
- - - - -
36e1daf0 by Sylvain Henry at 2020-06-13T02:13:03-04:00
DynFlags: make listVisibleModuleNames take a UnitState
- - - - -
5226da37 by Sylvain Henry at 2020-06-13T02:13:03-04:00
Refactor and document add_package
- - - - -
4b53aac1 by Sylvain Henry at 2020-06-13T02:13:03-04:00
Refactor and document closeUnitDeps
- - - - -
42c054f6 by Sylvain Henry at 2020-06-13T02:13:03-04:00
DynFlags: findWiredInUnits
- - - - -
a444d01b by Sylvain Henry at 2020-06-13T02:13:03-04:00
DynFlags: reportCycles, reportUnusable
- - - - -
8408d521 by Sylvain Henry at 2020-06-13T02:13:03-04:00
DynFlags: merge_databases
- - - - -
fca2d25f by Sylvain Henry at 2020-06-13T02:13:03-04:00
DynFlags: add UnitConfig datatype
Avoid directly querying flags from DynFlags to build the UnitState.
Instead go via UnitConfig so that we could reuse this to make another
UnitState for plugins.
- - - - -
4274688a by Sylvain Henry at 2020-06-13T02:13:03-04:00
Move distrustAll into mkUnitState
- - - - -
28d804e1 by Sylvain Henry at 2020-06-13T02:13:03-04:00
Create helper upd_wired_in_home_instantiations
- - - - -
ac964c83 by Sylvain Henry at 2020-06-13T02:13:03-04:00
Put database cache in UnitConfig
- - - - -
bfd0a78c by Sylvain Henry at 2020-06-13T02:13:03-04:00
Don't return preload units when we set DyNFlags
Preload units can be retrieved in UnitState when needed (i.e. in GHCi)
- - - - -
1fbb4bf5 by Sylvain Henry at 2020-06-13T02:13:03-04:00
NCGConfig: remove useless ncgUnitId field
- - - - -
c10ff7e7 by Sylvain Henry at 2020-06-13T02:13:03-04:00
Doc: fix some comments
- - - - -
456e17f0 by Sylvain Henry at 2020-06-13T02:13:03-04:00
Bump haddock submodule and allow metric decrease
Metric Decrease:
T12150
T12234
T5837
Metric Increase:
T16190
- - - - -
42953902 by Simon Peyton Jones at 2020-06-13T02:13:03-04:00
Trim the demand for recursive product types
Ticket #18304 showed that we need to be very careful
when exploring the demand (esp usage demand) on recursive
product types.
This patch solves the problem by trimming the demand on such types --
in effect, a form of "widening".
See the Note [Trimming a demand to a type] in DmdAnal, which explains
how I did this by piggy-backing on an existing mechansim for trimming
demands becuase of GADTs. The significant payload of this patch is
very small indeed:
* Make GHC.Core.Opt.WorkWrap.Utils.typeShape use RecTcChecker to
avoid looking through recursive types.
But on the way
* I found that ae_rec_tc was entirely inoperative and did nothing.
So I removed it altogether from DmdAnal.
* I moved some code around in DmdAnal and Demand.
(There are no actual changes in dmdFix.)
* I changed the API of DmsAnal.dmdAnalRhsLetDown to return
a StrictSig rather than a decorated Id
* I removed the dead function peelTsFuns from Demand
Performance effects:
Nofib: 0.0% changes. Not surprising, because they don't
use recursive products
Perf tests
T12227:
1% increase in compiler allocation, becuase $cto gets w/w'd.
It did not w/w before because it takes a deeply nested
argument, so the worker gets too many args, so we abandon w/w
altogether (see GHC.Core.Opt.WorkWrap.Utils.isWorkerSmallEnough)
With this patch we trim the demands. That is not strictly
necessary (since these Generic type constructors are like
tuples -- they can't cause a loop) but the net result is that
we now w/w $cto which is fine.
UniqLoop:
16% decrease in /runtime/ allocation. The UniqSupply is a
recursive product, so currently we abandon all strictness on
'churn'. With this patch 'churn' gets useful strictness, and
we w/w it. Hooray
Metric Decrease:
UniqLoop
Metric Increase:
T12227
- - - - -
87d504f4 by Viktor Dukhovni at 2020-06-13T02:13:05-04:00
Add introductory prose for Data.Traversable
- - - - -
9f09b608 by Oleg Grenrus at 2020-06-13T02:13:07-04:00
Fix #12073: Add MonadFix Q instance
- - - - -
220c2d34 by Ben Gamari at 2020-06-13T02:13:07-04:00
testsuite: Increase size of T12150
As noted in #18319, this test was previously very fragile. Increase its
size to make it more likely that its fails with its newly-increased
acceptance threshold.
Metric Increase:
T12150
- - - - -
8bba1c26 by Ben Gamari at 2020-06-13T04:59:06-04:00
gitlab-ci: Always push perf notes
Previously we ci.sh would run with `set -e` implying that we wouldn't
push perf notes if the testsuite were to fail, even if it *only* failed
due to perf notes. This rendered the whole performance testing story
quite fragile as a single regressing commit would cause every successive
commit to fail since a new baseline would not be uploaded.
Fix this by ensuring that we always push performance notes.
- - - - -
7a773f16 by Ben Gamari at 2020-06-13T15:10:55-04:00
gitlab-ci: Eliminate redundant push of CI metrics
- - - - -
a31218f7 by Ryan Scott at 2020-06-13T15:58:37-04:00
Use HsForAllTelescope to avoid inferred, visible foralls
Currently, `HsForAllTy` permits the combination of `ForallVis` and
`Inferred`, but you can't actually typecheck code that uses it
(e.g., `forall {a} ->`). This patch refactors `HsForAllTy` to use a
new `HsForAllTelescope` data type that makes a type-level distinction
between visible and invisible `forall`s such that visible `forall`s
do not track `Specificity`. That part of the patch is actually quite
small; the rest is simply changing consumers of `HsType` to
accommodate this new type.
Fixes #18235. Bumps the `haddock` submodule.
- - - - -
c0e6dee9 by Tamar Christina at 2020-06-14T09:07:44-04:00
winio: Add Atomic Exchange PrimOp and implement Atomic Ptr exchanges.
The initial version was rewritten by Tamar Christina.
It was rewritten in large parts by Andreas Klebinger.
Co-authored-by: Andreas Klebinger <klebinger.andreas at gmx.at>
- - - - -
9a7462fb by Ben Gamari at 2020-06-14T15:35:23-04:00
codeGen: Don't discard live case binders in unsafeEqualityProof logic
Previously CoreToStg would unconditionally discard cases of the form:
case unsafeEqualityProof of wild { _ -> rhs }
and rather replace the whole thing with `rhs`. However, in some cases
(see #18227) the case binder is still live, resulting in unbound
occurrences in `rhs`. Fix this by only discarding the case if the case
binder is dead.
Fixes #18227.
- - - - -
e4137c48 by Ben Gamari at 2020-06-14T15:35:23-04:00
testsuite: Add tests for #18227
T18227A is the original issue which gave rise to the ticket and depends
upon bytestring. T18227B is a minimized reproducer.
- - - - -
8bab9ff1 by Ben Gamari at 2020-06-14T15:35:59-04:00
hadrian: Fix rts include and library paths
Fixes two bugs:
* (?) and (<>) associated in a surprising way
* We neglected to include libdw paths in the rts configure flags
- - - - -
bd761185 by Ben Gamari at 2020-06-14T15:35:59-04:00
hadrian: Drop redundant GHC arguments
Cabal should already be passing this arguments to GHC.
- - - - -
01f7052c by Peter Trommler at 2020-06-14T15:36:38-04:00
FFI: Fix pass small ints in foreign call wrappers
The Haskell calling convention requires integer parameters smaller
than wordsize to be promoted to wordsize (where the upper bits are
don't care). To access such small integer parameter read a word from
the parameter array and then cast that word to the small integer
target type.
Fixes #15933
- - - - -
502647f7 by Krzysztof Gogolewski at 2020-06-14T15:37:14-04:00
Fix "ndecreasingIndentation" in manual (#18116)
- - - - -
9a9cc089 by Simon Jakobi at 2020-06-15T13:10:00-04:00
Use foldl' in unionManyUniqDSets
- - - - -
761dcb84 by Moritz Angermann at 2020-06-15T13:10:36-04:00
Load .lo as well.
Some archives contain so called linker objects, with the affectionate
.lo suffic. For example the musl libc.a will come in that form. We
still want to load those objects, hence we should not discard them and
look for .lo as well. Ultimately we might want to fix this proerly by
looking at the file magic.
- - - - -
cf01477f by Vladislav Zavialov at 2020-06-15T13:11:20-04:00
User's Guide: KnownNat evidence is Natural
This bit of documentation got outdated after commit
1fcede43d2b30f33b7505e25eb6b1f321be0407f
- - - - -
d0dcbfe6 by Jan Hrček at 2020-06-16T20:36:38+02:00
Fix typos and formatting in user guide
- - - - -
56a9e95f by Jan Hrček at 2020-06-16T20:36:38+02:00
Resolve TODO
- - - - -
3e884d14 by Jan Hrček at 2020-06-16T20:36:38+02:00
Rename TcHoleErrors to GHC.Tc.Errors.Hole
- - - - -
d23fc678 by Stefan Schulze Frielinghaus at 2020-06-17T15:31:09-04:00
hadrian: Build with threaded runtime if available
See #16873.
- - - - -
0639dc10 by Sylvain Henry at 2020-06-17T15:31:53-04:00
T16190: only measure bytes_allocated
Just adding `{-# LANGUAGE BangPatterns #-}` makes the two other metrics
fluctuate by 13%.
- - - - -
4cab6897 by Adam Sandberg Ericsson at 2020-06-17T15:32:44-04:00
docs: fix formatting in users guide
- - - - -
eb8115a8 by Sylvain Henry at 2020-06-17T15:33:23-04:00
Move CLabel assertions into smart constructors (#17957)
It avoids using DynFlags in the Outputable instance of Clabel to check
assertions at pretty-printing time.
- - - - -
7faa4509 by Ben Gamari at 2020-06-17T15:43:31-04:00
base: Bump to 4.15.0.0
- - - - -
20616959 by Ben Gamari at 2020-06-17T15:43:31-04:00
configure: Use grep -q instead of --quiet
The latter is apparently not supported by busybox.
- - - - -
40fa237e by Krzysztof Gogolewski at 2020-06-17T16:21:58-04:00
Linear types (#15981)
This is the first step towards implementation of the linear types proposal
(https://github.com/ghc-proposals/ghc-proposals/pull/111).
It features
* A language extension -XLinearTypes
* Syntax for linear functions in the surface language
* Linearity checking in Core Lint, enabled with -dlinear-core-lint
* Core-to-core passes are mostly compatible with linearity
* Fields in a data type can be linear or unrestricted; linear fields
have multiplicity-polymorphic constructors.
If -XLinearTypes is disabled, the GADT syntax defaults to linear fields
The following items are not yet supported:
* a # m -> b syntax (only prefix FUN is supported for now)
* Full multiplicity inference (multiplicities are really only checked)
* Decent linearity error messages
* Linear let, where, and case expressions in the surface language
(each of these currently introduce the unrestricted variant)
* Multiplicity-parametric fields
* Syntax for annotating lambda-bound or let-bound with a multiplicity
* Syntax for non-linear/multiple-field-multiplicity records
* Linear projections for records with a single linear field
* Linear pattern synonyms
* Multiplicity coercions (test LinearPolyType)
A high-level description can be found at
https://ghc.haskell.org/trac/ghc/wiki/LinearTypes/Implementation
Following the link above you will find a description of the changes made to Core.
This commit has been authored by
* Richard Eisenberg
* Krzysztof Gogolewski
* Matthew Pickering
* Arnaud Spiwack
With contributions from:
* Mark Barbone
* Alexander Vershilov
Updates haddock submodule.
- - - - -
6cb84c46 by Krzysztof Gogolewski at 2020-06-17T16:22:03-04:00
Various performance improvements
This implements several general performance improvements to GHC,
to offset the effect of the linear types change.
General optimisations:
- Add a `coreFullView` function which iterates `coreView` on the
head. This avoids making function recursive solely because the
iterate `coreView` themselves. As a consequence, this functions can
be inlined, and trigger case-of-known constructor (_e.g._
`kindRep_maybe`, `isLiftedRuntimeRep`, `isMultiplicityTy`,
`getTyVar_maybe`, `splitAppTy_maybe`, `splitFunType_maybe`,
`tyConAppTyCon_maybe`). The common pattern about all these functions
is that they are almost always used as views, and immediately
consumed by a case expression. This commit also mark them asx `INLINE`.
- In `subst_ty` add a special case for nullary `TyConApp`, which avoid
allocations altogether.
- Use `mkTyConApp` in `subst_ty` for the general `TyConApp`. This
required quite a bit of module shuffling.
case. `myTyConApp` enforces crucial sharing, which was lost during
substitution. See also !2952 .
- Make `subst_ty` stricter.
- In `eqType` (specifically, in `nonDetCmpType`), add a special case,
tested first, for the very common case of nullary `TyConApp`.
`nonDetCmpType` has been made `INLINE` otherwise it is actually a
regression. This is similar to the optimisations in !2952.
Linear-type specific optimisations:
- Use `tyConAppTyCon_maybe` instead of the more complex `eqType` in
the definition of the pattern synonyms `One` and `Many`.
- Break the `hs-boot` cycles between `Multiplicity.hs` and `Type.hs`:
`Multiplicity` now import `Type` normally, rather than from the
`hs-boot`. This way `tyConAppTyCon_maybe` can inline properly in the
`One` and `Many` pattern synonyms.
- Make `updateIdTypeAndMult` strict in its type and multiplicity
- The `scaleIdBy` gets a specialised definition rather than being an
alias to `scaleVarBy`
- `splitFunTy_maybe` is given the type `Type -> Maybe (Mult, Type,
Type)` instead of `Type -> Maybe (Scaled Type, Type)`
- Remove the `MultMul` pattern synonym in favour of a view `isMultMul`
because pattern synonyms appear not to inline well.
- in `eqType`, in a `FunTy`, compare multiplicities last: they are
almost always both `Many`, so it helps failing faster.
- Cache `manyDataConTy` in `mkTyConApp`, to make sure that all the
instances of `TyConApp ManyDataConTy []` are physically the same.
This commit has been authored by
* Richard Eisenberg
* Krzysztof Gogolewski
* Arnaud Spiwack
Metric Decrease:
haddock.base
T12227
T12545
T12990
T1969
T3064
T5030
T9872b
Metric Increase:
haddock.base
haddock.Cabal
haddock.compiler
T12150
T12234
T12425
T12707
T13035
T13056
T15164
T16190
T18304
T1969
T3064
T3294
T5631
T5642
T5837
T6048
T9020
T9233
T9675
T9872a
T9961
WWRec
- - - - -
57db91d8 by Sylvain Henry at 2020-06-17T16:22:03-04:00
Remove integer-simple
integer-simple uses lists of words (`[Word]`) to represent big numbers
instead of ByteArray#:
* it is less efficient than the newer ghc-bignum native backend
* it isn't compatible with the big number representation that is now
shared by all the ghc-bignum backends (based on the one that was
used only in integer-gmp before).
As a consequence, we simply drop integer-simple
- - - - -
9f96bc12 by Sylvain Henry at 2020-06-17T16:22:03-04:00
ghc-bignum library
ghc-bignum is a newer package that aims to replace the legacy
integer-simple and integer-gmp packages.
* it supports several backends. In particular GMP is still supported and
most of the code from integer-gmp has been merged in the "gmp"
backend.
* the pure Haskell "native" backend is new and is much faster than the
previous pure Haskell implementation provided by integer-simple
* new backends are easier to write because they only have to provide a
few well defined functions. All the other code is common to all
backends. In particular they all share the efficient small/big number
distinction previously used only in integer-gmp.
* backends can all be tested against the "native" backend with a simple
Cabal flag. Backends are only allowed to differ in performance, their
results should be the same.
* Add `integer-gmp` compat package: provide some pattern synonyms and
function aliases for those in `ghc-bignum`. It is intended to avoid
breaking packages that depend on `integer-gmp` internals.
Update submodules: text, bytestring
Metric Decrease:
Conversions
ManyAlternatives
ManyConstructors
Naperian
T10359
T10547
T10678
T12150
T12227
T12234
T12425
T13035
T13719
T14936
T1969
T4801
T4830
T5237
T5549
T5837
T8766
T9020
parsing001
space_leak_001
T16190
haddock.base
On ARM and i386, T17499 regresses (+6% > 5%).
On x86_64 unregistered, T13701 sometimes regresses (+2.2% > 2%).
Metric Increase:
T17499
T13701
- - - - -
96aa5787 by Sylvain Henry at 2020-06-17T16:22:03-04:00
Update compiler
Thanks to ghc-bignum, the compiler can be simplified:
* Types and constructors of Integer and Natural can be wired-in. It
means that we don't have to query them from interfaces. It also means
that numeric literals don't have to carry their type with them.
* The same code is used whatever ghc-bignum backend is enabled. In
particular, conversion of bignum literals into final Core expressions
is now much more straightforward. Bignum closure inspection too.
* GHC itself doesn't depend on any integer-* package anymore
* The `integerLibrary` setting is gone.
- - - - -
0f67e344 by Sylvain Henry at 2020-06-17T16:22:03-04:00
Update `base` package
* GHC.Natural isn't implemented in `base` anymore. It is provided by
ghc-bignum in GHC.Num.Natural. It means that we can safely use Natural
primitives in `base` without fearing issues with built-in rewrite
rules (cf #15286)
* `base` doesn't conditionally depend on an integer-* package anymore,
it depends on ghc-bignum
* Some duplicated code in integer-* can now be factored in GHC.Float
* ghc-bignum tries to use a uniform naming convention so most of the
other changes are renaming
- - - - -
aa9e7b71 by Sylvain Henry at 2020-06-17T16:22:03-04:00
Update `make` based build system
* replace integer-* package selection with ghc-bignum backend selection
- - - - -
f817d816 by Sylvain Henry at 2020-06-17T16:22:04-04:00
Update testsuite
* support detection of slow ghc-bignum backend (to replace the detection
of integer-simple use). There are still some test cases that the
native backend doesn't handle efficiently enough.
* remove tests for GMP only functions that have been removed from
ghc-bignum
* fix test results showing dependent packages (e.g. integer-gmp) or
showing suggested instances
* fix test using Integer/Natural API or showing internal names
- - - - -
dceecb09 by Sylvain Henry at 2020-06-17T16:22:04-04:00
Update Hadrian
* support ghc-bignum backend selection in flavours and command-line
* support ghc-bignum "--check" flag (compare results of selected backend
against results of the native one) in flavours and command-line (e.g.
pass --bignum=check-gmp" to check the "gmp" backend)
* remove the hack to workaround #15286
* build GMP only when the gmp backend is used
* remove hacks to workaround `text` package flags about integer-*. We
fix `text` to use ghc-bignum unconditionally in another patch
- - - - -
fa4281d6 by Sylvain Henry at 2020-06-17T16:22:04-04:00
Bump bytestring and text submodules
- - - - -
1a3f6f34 by Adam Sandberg Ericsson at 2020-06-18T23:03:36-04:00
docs: mention -hiedir in docs for -outputdir
[skip ci]
- - - - -
729bcb02 by Sylvain Henry at 2020-06-18T23:04:17-04:00
Hadrian: fix build on Mac OS Catalina (#17798)
- - - - -
95e18292 by Andreas Klebinger at 2020-06-18T23:04:58-04:00
Relax allocation threshold for T12150.
This test performs little work, so the most minor allocation
changes often cause the test to fail.
Increasing the threshold to 2% should help with this.
- - - - -
8ce6c393 by Sebastian Graf at 2020-06-18T23:05:36-04:00
hadrian: Bump pinned cabal.project to an existent index-state
- - - - -
08c1cb0f by Ömer Sinan Ağacan at 2020-06-18T23:06:21-04:00
Fix uninitialized field read in Linker.c
Valgrind report of the bug when running the test `linker_unload`:
==29666== Conditional jump or move depends on uninitialised value(s)
==29666== at 0x369C5B4: setOcInitialStatus (Linker.c:1305)
==29666== by 0x369C6C5: mkOc (Linker.c:1347)
==29666== by 0x36C027A: loadArchive_ (LoadArchive.c:522)
==29666== by 0x36C0600: loadArchive (LoadArchive.c:626)
==29666== by 0x2C144CD: ??? (in /home/omer/haskell/ghc_2/testsuite/tests/rts/linker/linker_unload.run/linker_unload)
==29666==
==29666== Conditional jump or move depends on uninitialised value(s)
==29666== at 0x369C5B4: setOcInitialStatus (Linker.c:1305)
==29666== by 0x369C6C5: mkOc (Linker.c:1347)
==29666== by 0x369C9F6: preloadObjectFile (Linker.c:1507)
==29666== by 0x369CA8D: loadObj_ (Linker.c:1536)
==29666== by 0x369CB17: loadObj (Linker.c:1557)
==29666== by 0x3866BC: main (linker_unload.c:33)
The problem is `mkOc` allocates a new `ObjectCode` and calls
`setOcInitialStatus` without initializing the `status` field.
`setOcInitialStatus` reads the field as first thing:
static void setOcInitialStatus(ObjectCode* oc) {
if (oc->status == OBJECT_DONT_RESOLVE)
return;
if (oc->archiveMemberName == NULL) {
oc->status = OBJECT_NEEDED;
} else {
oc->status = OBJECT_LOADED;
}
}
`setOcInitialStatus` is unsed in two places for two different purposes:
in `mkOc` where we don't have the `status` field initialized yet (`mkOc`
is supposed to initialize it), and `loadOc` where we do have `status`
field initialized and we want to update it. Instead of splitting the
function into two functions which are both called just once I inline the
functions in the use sites and remove it.
Fixes #18342
- - - - -
da18ff99 by Tamar Christina at 2020-06-18T23:07:03-04:00
fix windows bootstrap due to linker changes
- - - - -
2af0ec90 by Sylvain Henry at 2020-06-18T23:07:47-04:00
DynFlags: store default depth in SDocContext (#17957)
It avoids having to use DynFlags to reach for pprUserLength.
- - - - -
d4a0be75 by Sylvain Henry at 2020-06-18T23:08:35-04:00
Move tablesNextToCode field into Platform
tablesNextToCode is a platform setting and doesn't belong into DynFlags
(#17957). Doing this is also a prerequisite to fix #14335 where we deal
with two platforms (target and host) that may have different platform
settings.
- - - - -
809caedf by John Ericson at 2020-06-23T22:47:37-04:00
Switch from HscSource to IsBootInterface for module lookup in GhcMake
We look up modules by their name, and not their contents. There is no
way to separately reference a signature vs regular module; you get what
you get. Only boot files can be referenced indepenently with `import {-#
SOURCE #-}`.
- - - - -
446523c2 by John Ericson at 2020-06-26T03:57:58-04:00
Clean up boot vs non-boot disambiguating types
We often have (ModuleName, Bool) or (Module, Bool) pairs for "extended"
module names (without or with a unit id) disambiguating boot and normal
modules. We think this is important enough across the compiler that it
deserves a new nominal product type. We do this with synnoyms and a
functor named with a `Gen` prefix, matching other newly created
definitions.
It was also requested that we keep custom `IsBoot` / `NotBoot` sum type.
So we have it too. This means changing many the many bools to use that
instead.
- - - - -
f07e3197 by John Ericson at 2020-06-26T03:59:04-04:00
For -fkeep-failed do not duplicate dependency edge code
We now compute the deps for -fkeep-failed the same way that the original
graph calculates them, so the edges are correct. Upsweep really ought to
take the graph rather than a topological sort so we are never
recalculating anything, but at least things are done consistently now.
- - - - -
30 changed files:
- + .git-ignore-revs
- .gitlab-ci.yml
- .gitlab/ci.sh
- .gitlab/merge_request_templates/merge-request.md
- .gitmodules
- aclocal.m4
- compiler/GHC.hs
- compiler/GHC/Builtin/Names.hs
- − compiler/GHC/Builtin/Names.hs-boot
- compiler/GHC/Builtin/Names/TH.hs
- compiler/GHC/Builtin/PrimOps.hs
- compiler/GHC/Builtin/Types.hs
- compiler/GHC/Builtin/Types.hs-boot
- compiler/GHC/Builtin/Types/Prim.hs
- compiler/GHC/Builtin/Utils.hs
- compiler/GHC/Builtin/primops.txt.pp
- compiler/GHC/ByteCode/Asm.hs
- compiler/GHC/ByteCode/InfoTable.hs
- compiler/GHC/ByteCode/Linker.hs
- compiler/GHC/Cmm.hs
- compiler/GHC/Cmm/CLabel.hs
- compiler/GHC/Cmm/DebugBlock.hs
- compiler/GHC/Cmm/Info.hs
- compiler/GHC/Cmm/Info/Build.hs
- compiler/GHC/Cmm/LayoutStack.hs
- compiler/GHC/Cmm/MachOp.hs
- compiler/GHC/Cmm/Node.hs
- compiler/GHC/Cmm/Opt.hs
- compiler/GHC/Cmm/Parser.y
- compiler/GHC/Cmm/Pipeline.hs
The diff was not included because it is too large.
View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/06e42de162b5679c1737dc2c8962526d401c627f...f07e319793b4b3a6ee4693b68d7a667d26810c10
--
View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/06e42de162b5679c1737dc2c8962526d401c627f...f07e319793b4b3a6ee4693b68d7a667d26810c10
You're receiving this email because of your account on gitlab.haskell.org.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.haskell.org/pipermail/ghc-commits/attachments/20200626/00217ea5/attachment-0001.html>
More information about the ghc-commits
mailing list