[Git][ghc/ghc][wip/T19030] 14 commits: CodeGen: Make folds User/DefinerOfRegs INLINEABLE.
Ben Gamari
gitlab at gitlab.haskell.org
Mon Dec 14 15:37:27 UTC 2020
Ben Gamari pushed to branch wip/T19030 at Glasgow Haskell Compiler / GHC
Commits:
51e3bb6d by Andreas Klebinger at 2020-12-08T22:43:21-05:00
CodeGen: Make folds User/DefinerOfRegs INLINEABLE.
Reduces allocation for the test case I was looking at by about 1.2%.
Mostly from avoiding allocation of some folding functions which turn
into let-no-escape bindings which just reuse their environment instead.
We also force inlining in a few key places in CmmSink which helps a bit
more.
- - - - -
69ae10c3 by Andreas Klebinger at 2020-12-08T22:43:21-05:00
CmmSink: Force inlining of foldRegsDefd
Helps avoid allocating the folding function. Improves
perf for T3294 by about 1%.
- - - - -
6e3da800 by Andreas Klebinger at 2020-12-08T22:43:21-05:00
Cmm: Make a few types and utility function slightly stricter.
About 0.6% reduction in allocations for the code I was looking at.
Not a huge difference but no need to throw away performance.
- - - - -
aef44d7f by Andreas Klebinger at 2020-12-08T22:43:21-05:00
Cmm.Sink: Optimize retaining of assignments, live sets.
Sinking requires us to track live local regs after each
cmm statement. We used to do this via "Set LocalReg".
However we can replace this with a solution based on IntSet
which is overall more efficient without losing much. The thing
we lose is width of the variables, which isn't used by the sinking
pass anyway.
I also reworked how we keep assignments to regs mentioned in
skipped assignments. I put the details into
Note [Keeping assignemnts mentioned in skipped RHSs].
The gist of it is instead of keeping track of it via the use count
which is a `IntMap Int` we now use the live regs set (IntSet) which
is quite a bit faster.
I think it also matches the semantics a lot better. The skipped
(not discarded) assignment does in fact keep the regs on it's rhs
alive so keeping track of this in the live set seems like the clearer
solution as well.
Improves allocations for T3294 by yet another 1%.
- - - - -
59f2249b by Andreas Klebinger at 2020-12-08T22:43:21-05:00
GHC.Cmm.Opt: Be stricter in results.
Optimization either returns Nothing if nothing is to be done or
`Just <cmmExpr>` otherwise. There is no point in being lazy in
`cmmExpr`. We usually inspect this element so the thunk gets forced
not long after.
We might eliminate it as dead code once in a blue moon but that's
not a case worth optimizing for.
Overall the impact of this is rather low. As Cmm.Opt doesn't allocate
much (compared to the rest of GHC) to begin with.
- - - - -
54b88eac by Andreas Klebinger at 2020-12-08T22:43:57-05:00
Bump time submodule.
This should fix #19002.
- - - - -
35e7b0c6 by Kirill Elagin at 2020-12-10T01:45:54-05:00
doc: Clarify the default for -fomit-yields
“Yield points enabled” is confusing (and probably wrong?
I am not 100% sure what it means). Change it to a simple “on”.
Undo this change from 2c23fff2e03e77187dc4d01f325f5f43a0e7cad2.
- - - - -
3551c554 by Kirill Elagin at 2020-12-10T01:45:54-05:00
doc: Extra-clarify -fomit-yields
Be more clear on what this optimisation being on by default means
in terms of yields.
- - - - -
6484f0d7 by Sergei Trofimovich at 2020-12-10T01:46:33-05:00
rts/linker/Elf.c: add missing <dlfcn.h> include (musl support)
The change fixes build failure on musl:
```
rts/linker/Elf.c:2031:3: error:
warning: implicit declaration of function 'dlclose'; did you mean 'close'? [-Wimplicit-function-declaration]
2031 | dlclose(nc->dlopen_handle);
| ^~~~~~~
| close
```
Signed-off-by: Sergei Trofimovich <slyfox at gentoo.org>
- - - - -
ab24ed9b by Ben Gamari at 2020-12-11T03:55:51-05:00
users guide: Fix syntax errors
Fixes errors introduced by 3a55b3a2574f913d046f3a6f82db48d7f6df32e3.
- - - - -
d3a24d31 by Ben Gamari at 2020-12-11T03:55:51-05:00
users guide: Describe GC lifecycle events
Every time I am asked about how to interpret these events I need to
figure it out from scratch. It's well past time that the users guide
properly documents these.
- - - - -
741309b9 by Ben Gamari at 2020-12-11T03:56:27-05:00
gitlab-ci: Fix incorrect Docker image for nightly cross job
Also refactor the job definition to eliminate the bug by construction.
- - - - -
19703bc8 by Ben Gamari at 2020-12-11T03:56:27-05:00
gitlab-ci: Fix name of flavour in ThreadSanitizer job
It looks like I neglected to update this after introduce flavour
transformers.
- - - - -
e02c5308 by Ben Gamari at 2020-12-14T10:36:35-05:00
ghci: Take editor from VISUAL environment variable
Following the example of `git`, as noted in #19030.
Fixes #19030.
- - - - -
19 changed files:
- .gitlab-ci.yml
- compiler/GHC/Cmm/Expr.hs
- + compiler/GHC/Cmm/LRegSet.hs
- compiler/GHC/Cmm/Liveness.hs
- compiler/GHC/Cmm/Node.hs
- compiler/GHC/Cmm/Opt.hs
- compiler/GHC/Cmm/Sink.hs
- compiler/GHC/Cmm/Utils.hs
- compiler/GHC/Utils/Outputable.hs
- compiler/ghc.cabal.in
- docs/users_guide/9.2.1-notes.rst
- docs/users_guide/eventlog-formats.rst
- docs/users_guide/ghci.rst
- docs/users_guide/runtime_control.rst
- docs/users_guide/using-optimisation.rst
- ghc/GHCi/UI.hs
- libraries/time
- rts/Stats.c
- rts/linker/Elf.c
Changes:
=====================================
.gitlab-ci.yml
=====================================
@@ -257,27 +257,24 @@ validate-x86_64-linux-deb9-unreg-hadrian:
CONFIGURE_ARGS: --enable-unregisterised
TEST_ENV: "x86_64-linux-deb9-unreg-hadrian"
-validate-x86_64-linux-deb10-hadrian-cross-aarch64:
- <<: *nightly
+.build-x86_64-linux-deb10-hadrian-cross-aarch64:
extends: .validate-linux-hadrian
- stage: full-build
image: "registry.gitlab.haskell.org/ghc/ci-images/x86_64-linux-deb10:$DOCKER_REV"
variables:
BIN_DIST_NAME: "ghc-x86_64-deb9-linux"
- rules:
- - if: '$CI_MERGE_REQUEST_LABELS =~ /.*cross-compilation.*/'
- variables:
CONFIGURE_ARGS: --with-intree-gmp
CROSS_TARGET: "aarch64-linux-gnu"
+validate-x86_64-linux-deb10-hadrian-cross-aarch64:
+ extends: .build-x86_64-linux-deb10-hadrian-cross-aarch64
+ stage: full-build
+ rules:
+ - if: '$CI_MERGE_REQUEST_LABELS =~ /.*cross-compilation.*/'
+
nightly-x86_64-linux-deb10-hadrian-cross-aarch64:
<<: *nightly
- extends: .validate-linux-hadrian
+ extends: .build-x86_64-linux-deb10-hadrian-cross-aarch64
stage: full-build
- variables:
- CONFIGURE_ARGS: --with-intree-gmp
- CROSS_TARGET: "aarch64-linux-gnu"
-
############################################################
@@ -712,7 +709,7 @@ nightly-x86_64-linux-deb9-integer-simple:
stage: full-build
variables:
TEST_ENV: "x86_64-linux-deb9-tsan"
- BUILD_FLAVOUR: "thread-sanitizer"
+ BUILD_FLAVOUR: "default+thread_sanitizer"
TSAN_OPTIONS: "suppressions=$CI_PROJECT_DIR/rts/.tsan-suppressions"
# Haddock is large enough to make TSAN choke without massive quantities of
# memory.
=====================================
compiler/GHC/Cmm/Expr.hs
=====================================
@@ -53,14 +53,14 @@ import GHC.Types.Basic (Alignment, mkAlignment, alignmentOf)
-----------------------------------------------------------------------------
data CmmExpr
- = CmmLit CmmLit -- Literal
+ = CmmLit !CmmLit -- Literal
| CmmLoad !CmmExpr !CmmType -- Read memory location
| CmmReg !CmmReg -- Contents of register
| CmmMachOp MachOp [CmmExpr] -- Machine operation (+, -, *, etc.)
| CmmStackSlot Area {-# UNPACK #-} !Int
-- addressing expression of a stack slot
-- See Note [CmmStackSlot aliasing]
- | CmmRegOff !CmmReg Int
+ | CmmRegOff !CmmReg !Int
-- CmmRegOff reg i
-- ** is shorthand only, meaning **
-- CmmMachOp (MO_Add rep) [x, CmmLit (CmmInt (fromIntegral i) rep)]
@@ -173,16 +173,16 @@ Now, the assignments of y go away,
-}
data CmmLit
- = CmmInt !Integer Width
+ = CmmInt !Integer !Width
-- Interpretation: the 2's complement representation of the value
-- is truncated to the specified size. This is easier than trying
-- to keep the value within range, because we don't know whether
-- it will be used as a signed or unsigned value (the CmmType doesn't
-- distinguish between signed & unsigned).
- | CmmFloat Rational Width
+ | CmmFloat Rational !Width
| CmmVec [CmmLit] -- Vector literal
| CmmLabel CLabel -- Address of label
- | CmmLabelOff CLabel Int -- Address of label + byte offset
+ | CmmLabelOff CLabel !Int -- Address of label + byte offset
-- Due to limitations in the C backend, the following
-- MUST ONLY be used inside the info table indicated by label2
@@ -191,7 +191,7 @@ data CmmLit
-- Don't use it at all unless tablesNextToCode.
-- It is also used inside the NCG during when generating
-- position-independent code.
- | CmmLabelDiffOff CLabel CLabel Int Width -- label1 - label2 + offset
+ | CmmLabelDiffOff CLabel CLabel !Int !Width -- label1 - label2 + offset
-- In an expression, the width just has the effect of MO_SS_Conv
-- from wordWidth to the desired width.
--
@@ -363,6 +363,7 @@ instance DefinerOfRegs LocalReg CmmReg where
foldRegsDefd _ _ z (CmmGlobal _) = z
instance UserOfRegs GlobalReg CmmReg where
+ {-# INLINEABLE foldRegsUsed #-}
foldRegsUsed _ _ z (CmmLocal _) = z
foldRegsUsed _ f z (CmmGlobal reg) = f z reg
@@ -379,6 +380,7 @@ instance Ord r => DefinerOfRegs r r where
instance (Ord r, UserOfRegs r CmmReg) => UserOfRegs r CmmExpr where
-- The (Ord r) in the context is necessary here
-- See Note [Recursive superclasses] in GHC.Tc.TyCl.Instance
+ {-# INLINEABLE foldRegsUsed #-}
foldRegsUsed platform f !z e = expr z e
where expr z (CmmLit _) = z
expr z (CmmLoad addr _) = foldRegsUsed platform f z addr
=====================================
compiler/GHC/Cmm/LRegSet.hs
=====================================
@@ -0,0 +1,53 @@
+{-# LANGUAGE GADTs #-}
+{-# LANGUAGE ScopedTypeVariables #-}
+
+module GHC.Cmm.LRegSet (
+ LRegSet,
+ LRegKey,
+
+ emptyLRegSet,
+ nullLRegSet,
+ insertLRegSet,
+ elemLRegSet,
+
+ deleteFromLRegSet,
+ sizeLRegSet,
+
+ plusLRegSet,
+ elemsLRegSet
+ ) where
+
+import GHC.Prelude
+import GHC.Types.Unique
+import GHC.Cmm.Expr
+
+import Data.IntSet as IntSet
+
+-- Compact sets for membership tests of local variables.
+
+type LRegSet = IntSet.IntSet
+type LRegKey = Int
+
+emptyLRegSet :: LRegSet
+emptyLRegSet = IntSet.empty
+
+nullLRegSet :: LRegSet -> Bool
+nullLRegSet = IntSet.null
+
+insertLRegSet :: LocalReg -> LRegSet -> LRegSet
+insertLRegSet l = IntSet.insert (getKey (getUnique l))
+
+elemLRegSet :: LocalReg -> LRegSet -> Bool
+elemLRegSet l = IntSet.member (getKey (getUnique l))
+
+deleteFromLRegSet :: LRegSet -> LocalReg -> LRegSet
+deleteFromLRegSet set reg = IntSet.delete (getKey . getUnique $ reg) set
+
+sizeLRegSet :: IntSet -> Int
+sizeLRegSet = IntSet.size
+
+plusLRegSet :: IntSet -> IntSet -> IntSet
+plusLRegSet = IntSet.union
+
+elemsLRegSet :: IntSet -> [Int]
+elemsLRegSet = IntSet.toList
=====================================
compiler/GHC/Cmm/Liveness.hs
=====================================
@@ -6,9 +6,12 @@
module GHC.Cmm.Liveness
( CmmLocalLive
, cmmLocalLiveness
+ , cmmLocalLivenessL
, cmmGlobalLiveness
, liveLattice
+ , liveLatticeL
, gen_kill
+ , gen_killL
)
where
@@ -22,11 +25,14 @@ import GHC.Cmm.Dataflow.Block
import GHC.Cmm.Dataflow.Collections
import GHC.Cmm.Dataflow
import GHC.Cmm.Dataflow.Label
+import GHC.Cmm.LRegSet
import GHC.Data.Maybe
import GHC.Utils.Outputable
import GHC.Utils.Panic
+import GHC.Types.Unique
+
-----------------------------------------------------------------------------
-- Calculating what variables are live on entry to a basic block
-----------------------------------------------------------------------------
@@ -92,3 +98,66 @@ xferLive platform (BlockCC eNode middle xNode) fBase =
in mapSingleton (entryLabel eNode) result
{-# SPECIALIZE xferLive :: Platform -> TransferFun (CmmLive LocalReg) #-}
{-# SPECIALIZE xferLive :: Platform -> TransferFun (CmmLive GlobalReg) #-}
+
+-----------------------------------------------------------------------------
+-- | Specialization that only retains the keys for local variables.
+--
+-- Local variablas are mostly glorified Ints, and some parts of the compiler
+-- really don't care about anything but the Int part. So we can avoid some
+-- overhead by computing a IntSet instead of a Set LocalReg which (unsurprisingly)
+-- is quite a bit faster.
+-----------------------------------------------------------------------------
+
+type BlockEntryLivenessL = LabelMap LRegSet
+
+-- | The dataflow lattice
+liveLatticeL :: DataflowLattice LRegSet
+liveLatticeL = DataflowLattice emptyLRegSet add
+ where
+ add (OldFact old) (NewFact new) =
+ let !join = plusLRegSet old new
+ in changedIf (sizeLRegSet join > sizeLRegSet old) join
+
+
+cmmLocalLivenessL :: Platform -> CmmGraph -> BlockEntryLivenessL
+cmmLocalLivenessL platform graph =
+ check $ analyzeCmmBwd liveLatticeL (xferLiveL platform) graph mapEmpty
+ where
+ entry = g_entry graph
+ check facts =
+ noLiveOnEntryL entry (expectJust "check" $ mapLookup entry facts) facts
+
+-- | On entry to the procedure, there had better not be any LocalReg's live-in.
+noLiveOnEntryL :: BlockId -> LRegSet -> a -> a
+noLiveOnEntryL bid in_fact x =
+ if nullLRegSet in_fact then x
+ else pprPanic "LocalReg's live-in to graph" (ppr bid <+> ppr reg_uniques)
+ where
+ -- We convert the int's to uniques so that the printing matches that
+ -- of registers.
+ reg_uniques = map mkUniqueGrimily $ elemsLRegSet in_fact
+
+
+
+
+gen_killL
+ :: (DefinerOfRegs LocalReg n, UserOfRegs LocalReg n)
+ => Platform -> n -> LRegSet -> LRegSet
+gen_killL platform node set =
+ let !afterKill = foldRegsDefd platform deleteFromLRegSet set node
+ in foldRegsUsed platform (flip insertLRegSet) afterKill node
+{-# INLINE gen_killL #-}
+
+xferLiveL
+ :: ( UserOfRegs LocalReg (CmmNode O O)
+ , DefinerOfRegs LocalReg (CmmNode O O)
+ , UserOfRegs LocalReg (CmmNode O C)
+ , DefinerOfRegs LocalReg (CmmNode O C)
+ )
+ => Platform -> TransferFun LRegSet
+xferLiveL platform (BlockCC eNode middle xNode) fBase =
+ let joined = gen_killL platform xNode $! joinOutFacts liveLatticeL xNode fBase
+ !result = foldNodesBwdOO (gen_killL platform) middle joined
+ in mapSingleton (entryLabel eNode) result
+
+
=====================================
compiler/GHC/Cmm/Node.hs
=====================================
@@ -318,6 +318,7 @@ foreignTargetHints target
-- Instances of register and slot users / definers
instance UserOfRegs LocalReg (CmmNode e x) where
+ {-# INLINEABLE foldRegsUsed #-}
foldRegsUsed platform f !z n = case n of
CmmAssign _ expr -> fold f z expr
CmmStore addr rval -> fold f (fold f z addr) rval
@@ -332,6 +333,7 @@ instance UserOfRegs LocalReg (CmmNode e x) where
fold f z n = foldRegsUsed platform f z n
instance UserOfRegs GlobalReg (CmmNode e x) where
+ {-# INLINEABLE foldRegsUsed #-}
foldRegsUsed platform f !z n = case n of
CmmAssign _ expr -> fold f z expr
CmmStore addr rval -> fold f (fold f z addr) rval
@@ -348,10 +350,12 @@ instance UserOfRegs GlobalReg (CmmNode e x) where
instance (Ord r, UserOfRegs r CmmReg) => UserOfRegs r ForeignTarget where
-- The (Ord r) in the context is necessary here
-- See Note [Recursive superclasses] in GHC.Tc.TyCl.Instance
+ {-# INLINEABLE foldRegsUsed #-}
foldRegsUsed _ _ !z (PrimTarget _) = z
foldRegsUsed platform f !z (ForeignTarget e _) = foldRegsUsed platform f z e
instance DefinerOfRegs LocalReg (CmmNode e x) where
+ {-# INLINEABLE foldRegsDefd #-}
foldRegsDefd platform f !z n = case n of
CmmAssign lhs _ -> fold f z lhs
CmmUnsafeForeignCall _ fs _ -> fold f z fs
@@ -362,6 +366,7 @@ instance DefinerOfRegs LocalReg (CmmNode e x) where
fold f z n = foldRegsDefd platform f z n
instance DefinerOfRegs GlobalReg (CmmNode e x) where
+ {-# INLINEABLE foldRegsDefd #-}
foldRegsDefd platform f !z n = case n of
CmmAssign lhs _ -> fold f z lhs
CmmUnsafeForeignCall tgt _ _ -> fold f z (foreignTargetRegs tgt)
=====================================
compiler/GHC/Cmm/Opt.hs
=====================================
@@ -58,7 +58,7 @@ cmmMachOpFoldM
-> Maybe CmmExpr
cmmMachOpFoldM _ op [CmmLit (CmmInt x rep)]
- = Just $ case op of
+ = Just $! case op of
MO_S_Neg _ -> CmmLit (CmmInt (-x) rep)
MO_Not _ -> CmmLit (CmmInt (complement x) rep)
@@ -90,13 +90,13 @@ cmmMachOpFoldM platform conv_outer [CmmMachOp conv_inner [x]]
-- but remember to use the signedness from the widening, just in case
-- the final conversion is a widen.
| rep1 < rep2 && rep2 > rep3 ->
- Just $ cmmMachOpFold platform (intconv signed1 rep1 rep3) [x]
+ Just $! cmmMachOpFold platform (intconv signed1 rep1 rep3) [x]
-- Nested widenings: collapse if the signedness is the same
| rep1 < rep2 && rep2 < rep3 && signed1 == signed2 ->
- Just $ cmmMachOpFold platform (intconv signed1 rep1 rep3) [x]
+ Just $! cmmMachOpFold platform (intconv signed1 rep1 rep3) [x]
-- Nested narrowings: collapse
| rep1 > rep2 && rep2 > rep3 ->
- Just $ cmmMachOpFold platform (MO_UU_Conv rep1 rep3) [x]
+ Just $! cmmMachOpFold platform (MO_UU_Conv rep1 rep3) [x]
| otherwise ->
Nothing
where
@@ -117,34 +117,34 @@ cmmMachOpFoldM platform mop [CmmLit (CmmInt x xrep), CmmLit (CmmInt y _)]
= case mop of
-- for comparisons: don't forget to narrow the arguments before
-- comparing, since they might be out of range.
- MO_Eq _ -> Just $ CmmLit (CmmInt (if x_u == y_u then 1 else 0) (wordWidth platform))
- MO_Ne _ -> Just $ CmmLit (CmmInt (if x_u /= y_u then 1 else 0) (wordWidth platform))
-
- MO_U_Gt _ -> Just $ CmmLit (CmmInt (if x_u > y_u then 1 else 0) (wordWidth platform))
- MO_U_Ge _ -> Just $ CmmLit (CmmInt (if x_u >= y_u then 1 else 0) (wordWidth platform))
- MO_U_Lt _ -> Just $ CmmLit (CmmInt (if x_u < y_u then 1 else 0) (wordWidth platform))
- MO_U_Le _ -> Just $ CmmLit (CmmInt (if x_u <= y_u then 1 else 0) (wordWidth platform))
-
- MO_S_Gt _ -> Just $ CmmLit (CmmInt (if x_s > y_s then 1 else 0) (wordWidth platform))
- MO_S_Ge _ -> Just $ CmmLit (CmmInt (if x_s >= y_s then 1 else 0) (wordWidth platform))
- MO_S_Lt _ -> Just $ CmmLit (CmmInt (if x_s < y_s then 1 else 0) (wordWidth platform))
- MO_S_Le _ -> Just $ CmmLit (CmmInt (if x_s <= y_s then 1 else 0) (wordWidth platform))
-
- MO_Add r -> Just $ CmmLit (CmmInt (x + y) r)
- MO_Sub r -> Just $ CmmLit (CmmInt (x - y) r)
- MO_Mul r -> Just $ CmmLit (CmmInt (x * y) r)
- MO_U_Quot r | y /= 0 -> Just $ CmmLit (CmmInt (x_u `quot` y_u) r)
- MO_U_Rem r | y /= 0 -> Just $ CmmLit (CmmInt (x_u `rem` y_u) r)
- MO_S_Quot r | y /= 0 -> Just $ CmmLit (CmmInt (x `quot` y) r)
- MO_S_Rem r | y /= 0 -> Just $ CmmLit (CmmInt (x `rem` y) r)
-
- MO_And r -> Just $ CmmLit (CmmInt (x .&. y) r)
- MO_Or r -> Just $ CmmLit (CmmInt (x .|. y) r)
- MO_Xor r -> Just $ CmmLit (CmmInt (x `xor` y) r)
-
- MO_Shl r -> Just $ CmmLit (CmmInt (x `shiftL` fromIntegral y) r)
- MO_U_Shr r -> Just $ CmmLit (CmmInt (x_u `shiftR` fromIntegral y) r)
- MO_S_Shr r -> Just $ CmmLit (CmmInt (x `shiftR` fromIntegral y) r)
+ MO_Eq _ -> Just $! CmmLit (CmmInt (if x_u == y_u then 1 else 0) (wordWidth platform))
+ MO_Ne _ -> Just $! CmmLit (CmmInt (if x_u /= y_u then 1 else 0) (wordWidth platform))
+
+ MO_U_Gt _ -> Just $! CmmLit (CmmInt (if x_u > y_u then 1 else 0) (wordWidth platform))
+ MO_U_Ge _ -> Just $! CmmLit (CmmInt (if x_u >= y_u then 1 else 0) (wordWidth platform))
+ MO_U_Lt _ -> Just $! CmmLit (CmmInt (if x_u < y_u then 1 else 0) (wordWidth platform))
+ MO_U_Le _ -> Just $! CmmLit (CmmInt (if x_u <= y_u then 1 else 0) (wordWidth platform))
+
+ MO_S_Gt _ -> Just $! CmmLit (CmmInt (if x_s > y_s then 1 else 0) (wordWidth platform))
+ MO_S_Ge _ -> Just $! CmmLit (CmmInt (if x_s >= y_s then 1 else 0) (wordWidth platform))
+ MO_S_Lt _ -> Just $! CmmLit (CmmInt (if x_s < y_s then 1 else 0) (wordWidth platform))
+ MO_S_Le _ -> Just $! CmmLit (CmmInt (if x_s <= y_s then 1 else 0) (wordWidth platform))
+
+ MO_Add r -> Just $! CmmLit (CmmInt (x + y) r)
+ MO_Sub r -> Just $! CmmLit (CmmInt (x - y) r)
+ MO_Mul r -> Just $! CmmLit (CmmInt (x * y) r)
+ MO_U_Quot r | y /= 0 -> Just $! CmmLit (CmmInt (x_u `quot` y_u) r)
+ MO_U_Rem r | y /= 0 -> Just $! CmmLit (CmmInt (x_u `rem` y_u) r)
+ MO_S_Quot r | y /= 0 -> Just $! CmmLit (CmmInt (x `quot` y) r)
+ MO_S_Rem r | y /= 0 -> Just $! CmmLit (CmmInt (x `rem` y) r)
+
+ MO_And r -> Just $! CmmLit (CmmInt (x .&. y) r)
+ MO_Or r -> Just $! CmmLit (CmmInt (x .|. y) r)
+ MO_Xor r -> Just $! CmmLit (CmmInt (x `xor` y) r)
+
+ MO_Shl r -> Just $! CmmLit (CmmInt (x `shiftL` fromIntegral y) r)
+ MO_U_Shr r -> Just $! CmmLit (CmmInt (x_u `shiftR` fromIntegral y) r)
+ MO_S_Shr r -> Just $! CmmLit (CmmInt (x `shiftR` fromIntegral y) r)
_ -> Nothing
@@ -162,7 +162,7 @@ cmmMachOpFoldM platform mop [CmmLit (CmmInt x xrep), CmmLit (CmmInt y _)]
cmmMachOpFoldM platform op [x@(CmmLit _), y]
| not (isLit y) && isCommutableMachOp op
- = Just (cmmMachOpFold platform op [y, x])
+ = Just $! (cmmMachOpFold platform op [y, x])
-- Turn (a+b)+c into a+(b+c) where possible. Because literals are
-- moved to the right, it is more likely that we will find
@@ -183,7 +183,7 @@ cmmMachOpFoldM platform op [x@(CmmLit _), y]
cmmMachOpFoldM platform mop1 [CmmMachOp mop2 [arg1,arg2], arg3]
| mop2 `associates_with` mop1
&& not (isLit arg1) && not (isPicReg arg1)
- = Just (cmmMachOpFold platform mop2 [arg1, cmmMachOpFold platform mop1 [arg2,arg3]])
+ = Just $! (cmmMachOpFold platform mop2 [arg1, cmmMachOpFold platform mop1 [arg2,arg3]])
where
MO_Add{} `associates_with` MO_Sub{} = True
mop1 `associates_with` mop2 =
@@ -192,7 +192,7 @@ cmmMachOpFoldM platform mop1 [CmmMachOp mop2 [arg1,arg2], arg3]
-- special case: (a - b) + c ==> a + (c - b)
cmmMachOpFoldM platform mop1@(MO_Add{}) [CmmMachOp mop2@(MO_Sub{}) [arg1,arg2], arg3]
| not (isLit arg1) && not (isPicReg arg1)
- = Just (cmmMachOpFold platform mop1 [arg1, cmmMachOpFold platform mop2 [arg3,arg2]])
+ = Just $! (cmmMachOpFold platform mop1 [arg1, cmmMachOpFold platform mop2 [arg3,arg2]])
-- special case: (PicBaseReg + lit) + N ==> PicBaseReg + (lit+N)
--
@@ -205,27 +205,27 @@ cmmMachOpFoldM platform mop1@(MO_Add{}) [CmmMachOp mop2@(MO_Sub{}) [arg1,arg2],
cmmMachOpFoldM _ MO_Add{} [ CmmMachOp op at MO_Add{} [pic, CmmLit lit]
, CmmLit (CmmInt n rep) ]
| isPicReg pic
- = Just $ CmmMachOp op [pic, CmmLit $ cmmOffsetLit lit off ]
+ = Just $! CmmMachOp op [pic, CmmLit $ cmmOffsetLit lit off ]
where off = fromIntegral (narrowS rep n)
-- Make a RegOff if we can
cmmMachOpFoldM _ (MO_Add _) [CmmReg reg, CmmLit (CmmInt n rep)]
- = Just $ cmmRegOff reg (fromIntegral (narrowS rep n))
+ = Just $! cmmRegOff reg (fromIntegral (narrowS rep n))
cmmMachOpFoldM _ (MO_Add _) [CmmRegOff reg off, CmmLit (CmmInt n rep)]
- = Just $ cmmRegOff reg (off + fromIntegral (narrowS rep n))
+ = Just $! cmmRegOff reg (off + fromIntegral (narrowS rep n))
cmmMachOpFoldM _ (MO_Sub _) [CmmReg reg, CmmLit (CmmInt n rep)]
- = Just $ cmmRegOff reg (- fromIntegral (narrowS rep n))
+ = Just $! cmmRegOff reg (- fromIntegral (narrowS rep n))
cmmMachOpFoldM _ (MO_Sub _) [CmmRegOff reg off, CmmLit (CmmInt n rep)]
- = Just $ cmmRegOff reg (off - fromIntegral (narrowS rep n))
+ = Just $! cmmRegOff reg (off - fromIntegral (narrowS rep n))
-- Fold label(+/-)offset into a CmmLit where possible
cmmMachOpFoldM _ (MO_Add _) [CmmLit lit, CmmLit (CmmInt i rep)]
- = Just $ CmmLit (cmmOffsetLit lit (fromIntegral (narrowU rep i)))
+ = Just $! CmmLit (cmmOffsetLit lit (fromIntegral (narrowU rep i)))
cmmMachOpFoldM _ (MO_Add _) [CmmLit (CmmInt i rep), CmmLit lit]
- = Just $ CmmLit (cmmOffsetLit lit (fromIntegral (narrowU rep i)))
+ = Just $! CmmLit (cmmOffsetLit lit (fromIntegral (narrowU rep i)))
cmmMachOpFoldM _ (MO_Sub _) [CmmLit lit, CmmLit (CmmInt i rep)]
- = Just $ CmmLit (cmmOffsetLit lit (fromIntegral (negate (narrowU rep i))))
+ = Just $! CmmLit (cmmOffsetLit lit (fromIntegral (negate (narrowU rep i))))
-- Comparison of literal with widened operand: perform the comparison
@@ -245,7 +245,7 @@ cmmMachOpFoldM platform cmp [CmmMachOp conv [x], CmmLit (CmmInt i _)]
-- and the literal fits in the smaller size:
i == narrow_fn rep i
-- then we can do the comparison at the smaller size
- = Just (cmmMachOpFold platform narrow_cmp [x, CmmLit (CmmInt i rep)])
+ = Just $! (cmmMachOpFold platform narrow_cmp [x, CmmLit (CmmInt i rep)])
where
maybe_conversion (MO_UU_Conv from to)
| to > from
@@ -320,8 +320,8 @@ cmmMachOpFoldM platform mop [x, (CmmLit (CmmInt 1 rep))]
MO_Mul _ -> Just x
MO_S_Quot _ -> Just x
MO_U_Quot _ -> Just x
- MO_S_Rem _ -> Just $ CmmLit (CmmInt 0 rep)
- MO_U_Rem _ -> Just $ CmmLit (CmmInt 0 rep)
+ MO_S_Rem _ -> Just $! CmmLit (CmmInt 0 rep)
+ MO_U_Rem _ -> Just $! CmmLit (CmmInt 0 rep)
-- Comparisons; trickier
-- See Note [Comparison operators]
@@ -346,18 +346,18 @@ cmmMachOpFoldM platform mop [x, (CmmLit (CmmInt n _))]
= case mop of
MO_Mul rep
| Just p <- exactLog2 n ->
- Just (cmmMachOpFold platform (MO_Shl rep) [x, CmmLit (CmmInt p rep)])
+ Just $! (cmmMachOpFold platform (MO_Shl rep) [x, CmmLit (CmmInt p rep)])
MO_U_Quot rep
| Just p <- exactLog2 n ->
- Just (cmmMachOpFold platform (MO_U_Shr rep) [x, CmmLit (CmmInt p rep)])
+ Just $! (cmmMachOpFold platform (MO_U_Shr rep) [x, CmmLit (CmmInt p rep)])
MO_U_Rem rep
| Just _ <- exactLog2 n ->
- Just (cmmMachOpFold platform (MO_And rep) [x, CmmLit (CmmInt (n - 1) rep)])
+ Just $! (cmmMachOpFold platform (MO_And rep) [x, CmmLit (CmmInt (n - 1) rep)])
MO_S_Quot rep
| Just p <- exactLog2 n,
CmmReg _ <- x -> -- We duplicate x in signedQuotRemHelper, hence require
-- it is a reg. FIXME: remove this restriction.
- Just (cmmMachOpFold platform (MO_S_Shr rep)
+ Just $! (cmmMachOpFold platform (MO_S_Shr rep)
[signedQuotRemHelper rep p, CmmLit (CmmInt p rep)])
MO_S_Rem rep
| Just p <- exactLog2 n,
@@ -366,7 +366,7 @@ cmmMachOpFoldM platform mop [x, (CmmLit (CmmInt n _))]
-- We replace (x `rem` 2^p) by (x - (x `quot` 2^p) * 2^p).
-- Moreover, we fuse MO_S_Shr (last operation of MO_S_Quot)
-- and MO_S_Shl (multiplication by 2^p) into a single MO_And operation.
- Just (cmmMachOpFold platform (MO_Sub rep)
+ Just $! (cmmMachOpFold platform (MO_Sub rep)
[x, cmmMachOpFold platform (MO_And rep)
[signedQuotRemHelper rep p, CmmLit (CmmInt (- n) rep)]])
_ -> Nothing
=====================================
compiler/GHC/Cmm/Sink.hs
=====================================
@@ -1,4 +1,6 @@
{-# LANGUAGE GADTs #-}
+{-# LANGUAGE ScopedTypeVariables #-}
+
module GHC.Cmm.Sink (
cmmSink
) where
@@ -8,6 +10,7 @@ import GHC.Prelude
import GHC.Cmm
import GHC.Cmm.Opt
import GHC.Cmm.Liveness
+import GHC.Cmm.LRegSet
import GHC.Cmm.Utils
import GHC.Cmm.Dataflow.Block
import GHC.Cmm.Dataflow.Label
@@ -16,29 +19,13 @@ import GHC.Cmm.Dataflow.Graph
import GHC.Platform.Regs
import GHC.Platform
-import GHC.Types.Unique
import GHC.Types.Unique.FM
import qualified Data.IntSet as IntSet
import Data.List (partition)
-import qualified Data.Set as Set
import Data.Maybe
--- Compact sets for membership tests of local variables.
-
-type LRegSet = IntSet.IntSet
-
-emptyLRegSet :: LRegSet
-emptyLRegSet = IntSet.empty
-
-nullLRegSet :: LRegSet -> Bool
-nullLRegSet = IntSet.null
-
-insertLRegSet :: LocalReg -> LRegSet -> LRegSet
-insertLRegSet l = IntSet.insert (getKey (getUnique l))
-
-elemLRegSet :: LocalReg -> LRegSet -> Bool
-elemLRegSet l = IntSet.member (getKey (getUnique l))
+import GHC.Exts (inline)
-- -----------------------------------------------------------------------------
-- Sinking and inlining
@@ -167,8 +154,8 @@ type Assignments = [Assignment]
cmmSink :: Platform -> CmmGraph -> CmmGraph
cmmSink platform graph = ofBlockList (g_entry graph) $ sink mapEmpty $ blocks
where
- liveness = cmmLocalLiveness platform graph
- getLive l = mapFindWithDefault Set.empty l liveness
+ liveness = cmmLocalLivenessL platform graph
+ getLive l = mapFindWithDefault emptyLRegSet l liveness
blocks = revPostorder graph
@@ -188,8 +175,8 @@ cmmSink platform graph = ofBlockList (g_entry graph) $ sink mapEmpty $ blocks
-- Annotate the middle nodes with the registers live *after*
-- the node. This will help us decide whether we can inline
-- an assignment in the current node or not.
- live = Set.unions (map getLive succs)
- live_middle = gen_kill platform last live
+ live = IntSet.unions (map getLive succs)
+ live_middle = gen_killL platform last live
ann_middles = annotate platform live_middle (blockToList middle)
-- Now sink and inline in this block
@@ -201,7 +188,7 @@ cmmSink platform graph = ofBlockList (g_entry graph) $ sink mapEmpty $ blocks
-- one predecessor), so identify the join points and the set
-- of registers live in them.
(joins, nonjoins) = partition (`mapMember` join_pts) succs
- live_in_joins = Set.unions (map getLive joins)
+ live_in_joins = IntSet.unions (map getLive joins)
-- We do not want to sink an assignment into multiple branches,
-- so identify the set of registers live in multiple successors.
@@ -210,26 +197,28 @@ cmmSink platform graph = ofBlockList (g_entry graph) $ sink mapEmpty $ blocks
-- now live in multiple branches.
init_live_sets = map getLive nonjoins
live_in_multi live_sets r =
- case filter (Set.member r) live_sets of
+ case filter (elemLRegSet r) live_sets of
(_one:_two:_) -> True
_ -> False
-- Now, drop any assignments that we will not sink any further.
(dropped_last, assigs'') = dropAssignments platform drop_if init_live_sets assigs'
+ drop_if :: (LocalReg, CmmExpr, AbsMem)
+ -> [LRegSet] -> (Bool, [LRegSet])
drop_if a@(r,rhs,_) live_sets = (should_drop, live_sets')
where
should_drop = conflicts platform a final_last
|| not (isTrivial platform rhs) && live_in_multi live_sets r
- || r `Set.member` live_in_joins
+ || r `elemLRegSet` live_in_joins
live_sets' | should_drop = live_sets
| otherwise = map upd live_sets
- upd set | r `Set.member` set = set `Set.union` live_rhs
+ upd set | r `elemLRegSet` set = set `IntSet.union` live_rhs
| otherwise = set
- live_rhs = foldRegsUsed platform extendRegSet emptyRegSet rhs
+ live_rhs = foldRegsUsed platform (flip insertLRegSet) emptyLRegSet rhs
final_middle = foldl' blockSnoc middle' dropped_last
@@ -266,9 +255,9 @@ isTrivial _ _ = False
--
-- annotate each node with the set of registers live *after* the node
--
-annotate :: Platform -> LocalRegSet -> [CmmNode O O] -> [(LocalRegSet, CmmNode O O)]
+annotate :: Platform -> LRegSet -> [CmmNode O O] -> [(LRegSet, CmmNode O O)]
annotate platform live nodes = snd $ foldr ann (live,[]) nodes
- where ann n (live,nodes) = (gen_kill platform n live, (live,n) : nodes)
+ where ann n (live,nodes) = (gen_killL platform n live, (live,n) : nodes)
--
-- Find the blocks that have multiple successors (join points)
@@ -285,13 +274,13 @@ findJoinPoints blocks = mapFilter (>1) succ_counts
-- filter the list of assignments to remove any assignments that
-- are not live in a continuation.
--
-filterAssignments :: Platform -> LocalRegSet -> Assignments -> Assignments
+filterAssignments :: Platform -> LRegSet -> Assignments -> Assignments
filterAssignments platform live assigs = reverse (go assigs [])
where go [] kept = kept
go (a@(r,_,_):as) kept | needed = go as (a:kept)
| otherwise = go as kept
where
- needed = r `Set.member` live
+ needed = r `elemLRegSet` live
|| any (conflicts platform a) (map toNode kept)
-- Note that we must keep assignments that are
-- referred to by other assignments we have
@@ -312,7 +301,7 @@ filterAssignments platform live assigs = reverse (go assigs [])
--
walk :: Platform
- -> [(LocalRegSet, CmmNode O O)] -- nodes of the block, annotated with
+ -> [(LRegSet, CmmNode O O)] -- nodes of the block, annotated with
-- the set of registers live *after*
-- this node.
@@ -366,11 +355,11 @@ shouldSink _ _other = Nothing
-- out of inlining, but the inliner will see that r is live
-- after the instruction and choose not to inline r in the rhs.
--
-shouldDiscard :: CmmNode e x -> LocalRegSet -> Bool
+shouldDiscard :: CmmNode e x -> LRegSet -> Bool
shouldDiscard node live
= case node of
CmmAssign r (CmmReg r') | r == r' -> True
- CmmAssign (CmmLocal r) _ -> not (r `Set.member` live)
+ CmmAssign (CmmLocal r) _ -> not (r `elemLRegSet` live)
_otherwise -> False
@@ -403,8 +392,9 @@ dropAssignments platform should_drop state assigs
-- inlining opens up opportunities for doing so.
tryToInline
- :: Platform
- -> LocalRegSet -- set of registers live after this
+ :: forall x. Platform
+ -> LRegSet -- set of registers live after this
+ -- -> LocalRegSet -- set of registers live after this
-- node. We cannot inline anything
-- that is live after the node, unless
-- it is small enough to duplicate.
@@ -415,35 +405,42 @@ tryToInline
, Assignments -- Remaining assignments
)
-tryToInline platform live node assigs = go usages node emptyLRegSet assigs
+tryToInline platform liveAfter node assigs =
+ -- pprTrace "tryToInline assig length:" (ppr $ length assigs) $
+ go usages liveAfter node emptyLRegSet assigs
where
usages :: UniqFM LocalReg Int -- Maps each LocalReg to a count of how often it is used
usages = foldLocalRegsUsed platform addUsage emptyUFM node
- go _usages node _skipped [] = (node, [])
+ go :: UniqFM LocalReg Int -> LRegSet -> CmmNode O x -> LRegSet -> Assignments
+ -> (CmmNode O x, Assignments)
+ go _usages _live node _skipped [] = (node, [])
- go usages node skipped (a@(l,rhs,_) : rest)
- | cannot_inline = dont_inline
- | occurs_none = discard -- Note [discard during inlining]
- | occurs_once = inline_and_discard
- | isTrivial platform rhs = inline_and_keep
- | otherwise = dont_inline
+ go usages live node skipped (a@(l,rhs,_) : rest)
+ | cannot_inline = dont_inline
+ | occurs_none = discard -- Note [discard during inlining]
+ | occurs_once = inline_and_discard
+ | isTrivial platform rhs = inline_and_keep
+ | otherwise = dont_inline
where
- inline_and_discard = go usages' inl_node skipped rest
+ inline_and_discard = go usages' live inl_node skipped rest
where usages' = foldLocalRegsUsed platform addUsage usages rhs
- discard = go usages node skipped rest
+ discard = go usages live node skipped rest
dont_inline = keep node -- don't inline the assignment, keep it
inline_and_keep = keep inl_node -- inline the assignment, keep it
+ keep :: CmmNode O x -> (CmmNode O x, Assignments)
keep node' = (final_node, a : rest')
- where (final_node, rest') = go usages' node' (insertLRegSet l skipped) rest
- usages' = foldLocalRegsUsed platform (\m r -> addToUFM m r 2)
- usages rhs
- -- we must not inline anything that is mentioned in the RHS
- -- of a binding that we have already skipped, so we set the
- -- usages of the regs on the RHS to 2.
+ where (final_node, rest') = go usages live' node' (insertLRegSet l skipped) rest
+
+ -- Avoid discarding of assignments to vars on the rhs.
+ -- See Note [Keeping assignemnts mentioned in skipped RHSs]
+ -- usages' = foldLocalRegsUsed platform (\m r -> addToUFM m r 2)
+ -- usages rhs
+ live' = inline foldLocalRegsUsed platform (\m r -> insertLRegSet r m)
+ live rhs
cannot_inline = skipped `regsUsedIn` rhs -- Note [dependent assignments]
|| l `elemLRegSet` skipped
@@ -451,7 +448,7 @@ tryToInline platform live node assigs = go usages node emptyLRegSet assigs
-- How often is l used in the current node.
l_usages = lookupUFM usages l
- l_live = l `elemRegSet` live
+ l_live = l `elemLRegSet` live
occurs_once = not l_live && l_usages == Just 1
occurs_none = not l_live && l_usages == Nothing
@@ -467,6 +464,27 @@ tryToInline platform live node assigs = go usages node emptyLRegSet assigs
inl_exp (CmmMachOp op args) = cmmMachOpFold platform op args
inl_exp other = other
+{- Note [Keeping assignemnts mentioned in skipped RHSs]
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+ If we have to assignments: [z = y, y = e1] and we skip
+ z we *must* retain the assignment y = e1. This is because
+ we might inline "z = y" into another node later on so we
+ must ensure y is still defined at this point.
+
+ If we dropped the assignment of "y = e1" then we would end up
+ referencing a variable which hasn't been mentioned after
+ inlining.
+
+ We use a hack to do this.
+
+ We pretend the regs from the rhs are live after the current
+ node. Since we only discard assignments to variables
+ which are dead after the current block this prevents discarding of the
+ assignment. It still allows inlining should e1 be a trivial rhs
+ however.
+
+-}
{- Note [improveConditional]
@@ -610,18 +628,34 @@ conflicts platform (r, rhs, addr) node
-- (7) otherwise, no conflict
| otherwise = False
+{- Note [Inlining foldRegsDefd]
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+ foldRegsDefd is, after optimization, *not* a small function so
+ it's only marked INLINEABLE, but not INLINE.
+
+ However in some specific cases we call it *very* often making it
+ important to avoid the overhead of allocating the folding function.
+
+ So we simply force inlining via the magic inline function.
+ For T3294 this improves allocation with -O by ~1%.
+
+-}
+
-- Returns True if node defines any global registers that are used in the
-- Cmm expression
globalRegistersConflict :: Platform -> CmmExpr -> CmmNode e x -> Bool
globalRegistersConflict platform expr node =
- foldRegsDefd platform (\b r -> b || regUsedIn platform (CmmGlobal r) expr)
+ -- See Note [Inlining foldRegsDefd]
+ inline foldRegsDefd platform (\b r -> b || regUsedIn platform (CmmGlobal r) expr)
False node
-- Returns True if node defines any local registers that are used in the
-- Cmm expression
localRegistersConflict :: Platform -> CmmExpr -> CmmNode e x -> Bool
localRegistersConflict platform expr node =
- foldRegsDefd platform (\b r -> b || regUsedIn platform (CmmLocal r) expr)
+ -- See Note [Inlining foldRegsDefd]
+ inline foldRegsDefd platform (\b r -> b || regUsedIn platform (CmmLocal r) expr)
False node
-- Note [Sinking and calls]
=====================================
compiler/GHC/Cmm/Utils.hs
=====================================
@@ -264,9 +264,11 @@ cmmOffset platform e byte_off = case e of
CmmStackSlot area off -> CmmStackSlot area (off - byte_off)
-- note stack area offsets increase towards lower addresses
CmmMachOp (MO_Add rep) [expr, CmmLit (CmmInt byte_off1 _rep)]
- -> CmmMachOp (MO_Add rep) [expr, CmmLit (CmmInt (byte_off1 + toInteger byte_off) rep)]
- _ -> CmmMachOp (MO_Add width) [e, CmmLit (CmmInt (toInteger byte_off) width)]
- where width = cmmExprWidth platform e
+ -> let !lit_off = (byte_off1 + toInteger byte_off)
+ in CmmMachOp (MO_Add rep) [expr, CmmLit (CmmInt lit_off rep)]
+ _ -> let !width = cmmExprWidth platform e
+ in
+ CmmMachOp (MO_Add width) [e, CmmLit (CmmInt (toInteger byte_off) width)]
-- Smart constructor for CmmRegOff. Same caveats as cmmOffset above.
cmmRegOff :: CmmReg -> Int -> CmmExpr
=====================================
compiler/GHC/Utils/Outputable.hs
=====================================
@@ -115,6 +115,7 @@ import Data.Int
import qualified Data.IntMap as IM
import Data.Set (Set)
import qualified Data.Set as Set
+import qualified Data.IntSet as IntSet
import Data.String
import Data.Word
import System.IO ( Handle )
@@ -863,6 +864,9 @@ instance (Outputable a) => Outputable (NonEmpty a) where
instance (Outputable a) => Outputable (Set a) where
ppr s = braces (fsep (punctuate comma (map ppr (Set.toList s))))
+instance Outputable IntSet.IntSet where
+ ppr s = braces (fsep (punctuate comma (map ppr (IntSet.toList s))))
+
instance (Outputable a, Outputable b) => Outputable (a, b) where
ppr (x,y) = parens (sep [ppr x <> comma, ppr y])
=====================================
compiler/ghc.cabal.in
=====================================
@@ -205,6 +205,7 @@ Library
GHC.Cmm.Switch
GHC.Cmm.Switch.Implement
GHC.CmmToAsm
+ GHC.Cmm.LRegSet
GHC.CmmToAsm.BlockLayout
GHC.CmmToAsm.CFG
GHC.CmmToAsm.CFG.Dominators
=====================================
docs/users_guide/9.2.1-notes.rst
=====================================
@@ -53,6 +53,14 @@ Compiler
will have to be updated, as GHC no longer uses flattening skolems or
flattening metavariables.
+GHCi
+~~~~
+
+- GHCi's :ghci-cmd:`:edit` command now looks for an editor in
+ the :envvar:`VISUAL` environment variable before
+ :envvar:`EDITOR`, following UNIX convention.
+ (:ghc-ticket:`19030`)
+
``ghc-prim`` library
~~~~~~~~~~~~~~~~~~~~
=====================================
docs/users_guide/eventlog-formats.rst
=====================================
@@ -207,9 +207,61 @@ Thread and scheduling events
:base-ref:`Control.Concurrent.setThreadLabel`).
+.. _gc-events:
+
Garbage collector events
~~~~~~~~~~~~~~~~~~~~~~~~
+The following events mark various points of the lifecycle of a moving garbage
+collection.
+
+A typical garbage collection will look something like the following:
+
+1. A capability realizes that it needs a garbage collection (e.g. as a result
+ of running out of nursery) and requests a garbage collection. This is
+ marked by :event-type:`REQUEST_SEQ_GC` or :event-type:`REQUEST_PAR_GC`.
+
+2. As other capabilities reach yield points and suspend execution they emit
+ :event-type:`STOP_THREAD` events.
+
+3. When all capabilities have suspended execution, collection will begin,
+ marked by a :event-type:`GC_START` event.
+
+4. As individual parallel GC threads commence with scavenging they will emit
+ :event-type:`GC_WORK` events.
+
+5. If a parallel GC thread runs out of work it will emit a
+ :event-type:`GC_IDLE` event. If it is later handed more work it will emit
+ another :event-type:`GC_WORK` event.
+
+6. Eventually when scavenging has finished a :event-type:`GC_DONE` event
+ will be emitted by each GC thread.
+
+7. A bit of book-keeping is performed.
+
+8. A :event-type:`GC_END` event will be emitted marking the end of the GC cycle.
+
+9. A :event-type:`HEAP_SIZE` event will be emitted giving the
+ cumulative heap allocations of the program until now.
+
+10. A :event-type:`GC_STATS_GHC` event will be emitted
+ containing various details of the collection and heap state.
+
+11. In the case of a major collection, a
+ :event-type:`HEAP_LIVE` event will be emitted describing
+ the current size of the live on-heap data.
+
+12. In the case of the :ghc-flag:`-threaded` RTS, a
+ :event-type:`SPARK_COUNTERS` event will be emitted giving
+ details on how many sparks have been created, evaluated, and GC'd.
+
+13. As mutator threads resume execution they will emit :event-type:`RUN_THREAD`
+ events.
+
+Note that in the case of the concurrent non-moving collector additional events
+will be emitted during the concurrent phase of collection. These are described
+in :ref:`nonmoving-gc-events`.
+
.. event-type:: GC_START
:tag: 9
@@ -685,6 +737,46 @@ These events mark various stages of the
:rts-flag:`non-moving collection <--nonmoving-gc>` lifecycle. These are enabled
with the ``+RTS -lg`` event-set.
+A typical non-moving collection cycle will look something like the following:
+
+1. The preparatory phase of collection will emit the usual events associated
+ with a moving collection. See :ref:`gc-events` for details.
+
+2. The concurrent write barrier is enabled and the concurrent mark thread is
+ started. From this point forward mutator threads may emit
+ :event-type:`CONC_UPD_REM_SET_FLUSH` events, indicating that they have
+ flushed their capability-local update remembered sets.
+
+3. Concurrent marking begins, denoted by a :event-type:`CONC_MARK_BEGIN` event.
+
+4. When the mark queue is depleted a :event-type:`CONC_MARK_END` is emitted.
+
+5. If necessary (e.g. due to weak pointer marking), the marking process will
+ continue, returning to step (3) above.
+
+6. When the collector has done as much concurrent marking as it can it will
+ enter the post-mark synchronization phase of collection, denoted by a
+ :event-type:`CONC_SYNC_BEGIN` event.
+
+7. Mutator threads will suspend execution and, if necessary, flush their update
+ remembered sets (indicated by :event-type:`CONC_UPD_REM_SET_FLUSH` events).
+
+8. The collector will do any final marking necessary (indicated by
+ :event-type:`CONC_MARK_BEGIN` and :event-type:`CONC_MARK_END` events).
+
+9. The collector will do a small amount of sweeping, disable the write barrier,
+ emit a :event-type:`CONC_SYNC_END` event, and allow mutators to resume
+
+10. The collector will begin the concurrent sweep phase, indicated by a
+ :event-type:`CONC_SWEEP_BEGIN` event.
+
+11. Once sweeping has concluded a :event-type:`CONC_SWEEP_END` event will be
+ emitted and the concurrent collector thread will terminate.
+
+12. A :event-type:`NONMOVING_HEAP_CENSUS` event will be emitted describing the
+ fragmentation state of the non-moving heap.
+
+
.. event-type:: CONC_MARK_BEGIN
:tag: 200
@@ -742,8 +834,9 @@ with the ``+RTS -lg`` event-set.
Non-moving heap census
~~~~~~~~~~~~~~~~~~~~~~
-The non-moving heap census events (enabled with the ``+RTS -ln`` event-set) are
-intended to provide insight into fragmentation of the non-moving heap.
+The non-moving heap census events (enabled with the :rts-flag:`+RTS -ln <-l ⟨flags⟩>`
+event-set) are intended to provide insight into fragmentation of the non-moving
+heap.
.. event-type:: NONMOVING_HEAP_CENSUS
@@ -760,8 +853,8 @@ Ticky counters
~~~~~~~~~~~~~~
Programs compiled with :ghc-flag:`-ticky` and :ghc-flag:`-eventlog` and invoked
-with ``+RTS -lT`` will emit periodic samples of the ticky entry counters to the
-eventlog.
+with :rts-flag:`+RTS -lT <-l ⟨flags⟩>` will emit periodic samples of the ticky
+entry counters to the eventlog.
.. event-type:: TICKY_COUNTER_DEF
=====================================
docs/users_guide/ghci.rst
=====================================
@@ -2443,9 +2443,10 @@ commonly used commands.
Opens an editor to edit the file ⟨file⟩, or the most recently loaded
module if ⟨file⟩ is omitted. If there were errors during the last
loading, the cursor will be positioned at the line of the first
- error. The editor to invoke is taken from the :envvar:`EDITOR` environment
- variable, or a default editor on your system if :envvar:`EDITOR` is not
- set. You can change the editor using :ghci-cmd:`:set editor`.
+ error. The editor to invoke is taken from the :envvar:`VISUAL` or
+ :envvar:`EDITOR` environment variables, or a default editor on your system
+ if neither is not set. You can change the editor using :ghci-cmd:`:set
+ editor`.
.. ghci-cmd:: :enable; * | ⟨num⟩ ...
=====================================
docs/users_guide/runtime_control.rst
=====================================
@@ -1194,6 +1194,9 @@ When the program is linked with the :ghc-flag:`-eventlog` option
- ``f`` — parallel sparks (fully accurate). Disabled by default.
+ - ``T`` — :ghc-flag:`ticky-ticky profiler <-ticky>` events. Disabled by
+ default.
+
- ``u`` — user events. These are events emitted from Haskell code using
functions such as ``Debug.Trace.traceEvent``. Enabled by default.
=====================================
docs/users_guide/using-optimisation.rst
=====================================
@@ -720,7 +720,7 @@ by saying ``-fno-wombat``.
:reverse: -fno-omit-yields
:category:
- :default: yield points enabled
+ :default: on (yields are *not* inserted)
Tells GHC to omit heap checks when no allocation is
being performed. While this improves binary sizes by about 5%, it
@@ -1197,16 +1197,16 @@ by saying ``-fno-wombat``.
This is the full syntax for cardinalities, demands and sub-demands in BNF:
- .. code-block::
+ .. code-block:: none
- card ::= B | A | 1 | U | S | M semantics as in the table above
+ card ::= B | A | 1 | U | S | M semantics as in the table above
- d ::= card sd card = how often, sd = how deep
- | card abbreviation: Same as "card card"
+ d ::= card sd card = how often, sd = how deep
+ | card abbreviation: Same as "card card"
- sd ::= card polymorphic sub-demand, card at every level
- | P(d,d,..) product sub-demand
- | Ccard(sd) call sub-demand
+ sd ::= card polymorphic sub-demand, card at every level
+ | P(d,d,..) product sub-demand
+ | Ccard(sd) call sub-demand
For example, ``fst`` is strict in its argument, and also in the first
component of the argument. It will not evaluate the argument's second
@@ -1234,17 +1234,17 @@ by saying ``-fno-wombat``.
We summarise a function's demand properties in its *demand signature*.
This is the general syntax:
- .. code-block::
+ .. code-block:: none
- {x->dx,y->dy,z->dz...}<d1><d2><d3>...<dn>div
- ^ ^ ^ ^ ^ ^
- | | | | | |
- | \---+---+------/ |
- | | |
- demand on free demand on divergence
- variables arguments information
- (omitted if empty) (omitted if
- no information)
+ {x->dx,y->dy,z->dz...}<d1><d2><d3>...<dn>div
+ ^ ^ ^ ^ ^ ^
+ | | | | | |
+ | \---+---+------/ |
+ | | |
+ demand on free demand on divergence
+ variables arguments information
+ (omitted if empty) (omitted if
+ no information)
We summarise ``fst``'s demand properties in its *demand signature*
``<SP(SU,A)>``, which just says "If ``fst`` is applied to one argument,
@@ -1260,13 +1260,11 @@ by saying ``-fno-wombat``.
**Call sub-demands**
- Consider ``maybe``:
+ Consider ``maybe``: ::
- .. code-block::
-
- maybe :: b -> (a -> b) -> Maybe a -> b
- maybe n _ Nothing = n
- maybe _ s (Just a) = s a
+ maybe :: b -> (a -> b) -> Maybe a -> b
+ maybe n _ Nothing = n
+ maybe _ s (Just a) = s a
We give it demand signature ``<U><1C1(U)><SU>``. The ``C1(U)`` is a *call
sub-demand* that says "Called at most once, where the result is used
=====================================
ghc/GHCi/UI.hs
=====================================
@@ -421,13 +421,14 @@ defFullHelpText =
findEditor :: IO String
findEditor = do
- getEnv "EDITOR"
- `catchIO` \_ -> do
+ getEnv "VISUAL" <|> getEnv "EDITOR" <|> defaultEditor
+ where
+ defaultEditor = do
#if defined(mingw32_HOST_OS)
- win <- System.Win32.getWindowsDirectory
- return (win </> "notepad.exe")
+ win <- System.Win32.getWindowsDirectory
+ return (win </> "notepad.exe")
#else
- return ""
+ return ""
#endif
default_progname, default_stop :: String
=====================================
libraries/time
=====================================
@@ -1 +1 @@
-Subproject commit c25d6a76702b454426e149fb590da5cb69f3bd0a
+Subproject commit df292e1a74c6a87c2c1c889679074dd46ad39461
=====================================
rts/Stats.c
=====================================
@@ -570,7 +570,7 @@ stat_endGC (Capability *cap, gc_thread *initiating_gct, W_ live, W_ copied, W_ s
// Emit events to the event log
// Has to be emitted while all caps stopped for GC, but before GC_END.
- // See trac.haskell.org/ThreadScope/wiki/RTSsummaryEvents
+ // See https://gitlab.haskell.org/ghc/ghc/-/wikis/RTSsummaryEvents
// for a detailed design rationale of the current setup
// of GC eventlog events.
traceEventGcGlobalSync(cap);
=====================================
rts/linker/Elf.c
=====================================
@@ -32,6 +32,9 @@
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
+#if defined(HAVE_DLFCN_H)
+#include <dlfcn.h>
+#endif
#if defined(HAVE_SYS_STAT_H)
#include <sys/stat.h>
#endif
View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/ecb8b36971a883594f4d2651b57bff1fffbf04ea...e02c53087c5c3a1de38aeeb79b5dc16fd1185a65
--
View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/ecb8b36971a883594f4d2651b57bff1fffbf04ea...e02c53087c5c3a1de38aeeb79b5dc16fd1185a65
You're receiving this email because of your account on gitlab.haskell.org.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.haskell.org/pipermail/ghc-commits/attachments/20201214/53b48d08/attachment-0001.html>
More information about the ghc-commits
mailing list